[resend] [PATCH 5/5] spi: bcm2835aux: support effective_speed_hz

[kernel@xxxxxxxxxxxxxxxx]

From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>

Setting spi_transfer->effective_speed_hz in transfer_one so that
it can get used in cs_change_delay configured with delay as a muliple
of SPI clock cycles.

Signed-off-by: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
---
 drivers/spi/spi-bcm2835aux.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c
index 671e374e1b01..51ce76706073 100644
--- a/drivers/spi/spi-bcm2835aux.c
+++ b/drivers/spi/spi-bcm2835aux.c
@@ -325,7 +325,6 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master,
 {
 	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
 	unsigned long spi_hz, clk_hz, speed;
-	unsigned long spi_used_hz;

 	/* calculate the registers to handle
 	 *
@@ -353,7 +352,7 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master,
 	/* set the new speed */
 	bs->cntl[0] |= speed << BCM2835_AUX_SPI_CNTL0_SPEED_SHIFT;

-	spi_used_hz = clk_hz / (2 * (speed + 1));
+	tfr->effective_speed_hz = clk_hz / (2 * (speed + 1));

 	/* set transmit buffers and length */
 	bs->tx_buf = tfr->tx_buf;
@@ -371,7 +370,7 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master,
 	 */
 #define HZ_PER_BYTE ((9 * 1000000) / BCM2835_AUX_SPI_POLLING_LIMIT_US)
 	/* run in polling mode for short transfers */
-	if (tfr->len < spi_used_hz / HZ_PER_BYTE)
+	if (tfr->len < tfr->effective_speed_hz / HZ_PER_BYTE)
 		return bcm2835aux_spi_transfer_one_poll(master, spi, tfr);

 	/* run in interrupt mode for all others */
--
2.11.0