This patch changes some comments to use the recommended multi-line comment style. Signed-off-by: Stefan Roese <sr@xxxxxxx> Cc: Mark Brown <broonie@xxxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Cc: NeilBrown <neil@xxxxxxxxxx> Cc: Sankalp Negi <sankalpnegi2310@xxxxxxxxx> Cc: Chuanhong Guo <gch981213@xxxxxxxxx> Cc: John Crispin <john@xxxxxxxxxxx> --- v3: - New patch, changes spilt into separate patches drivers/staging/mt7621-spi/spi-mt7621.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/staging/mt7621-spi/spi-mt7621.c b/drivers/staging/mt7621-spi/spi-mt7621.c index e548f816ea9e..00cff75ee7ac 100644 --- a/drivers/staging/mt7621-spi/spi-mt7621.c +++ b/drivers/staging/mt7621-spi/spi-mt7621.c @@ -123,10 +123,10 @@ static int mt7621_spi_prepare(struct spi_device *spi, unsigned int speed) if (spi->mode & SPI_LSB_FIRST) reg |= MT7621_LSB_FIRST; - /* This SPI controller seems to be tested on SPI flash only - * and some bits are swizzled under other SPI modes probably - * due to incorrect wiring inside the silicon. Only mode 0 - * works correctly. + /* + * This SPI controller seems to be tested on SPI flash only and some + * bits are swizzled under other SPI modes probably due to incorrect + * wiring inside the silicon. Only mode 0 works correctly. */ reg &= ~(MT7621_CPHA | MT7621_CPOL); @@ -155,9 +155,10 @@ static inline int mt7621_spi_wait_till_ready(struct mt7621_spi *rs) static void mt7621_spi_read_half_duplex(struct mt7621_spi *rs, int rx_len, u8 *buf) { - /* Combine with any pending write, and perform one or - * more half-duplex transactions reading 'len' bytes. - * Data to be written is already in MT7621_SPI_DATA* + /* + * Combine with any pending write, and perform one or more half-duplex + * transactions reading 'len' bytes. Data to be written is already in + * MT7621_SPI_DATA. */ int tx_len = rs->pending_write; -- 2.20.1