Re: [PATCH v7 6/9] mtd: fsl-quadspi: Remove the driver as it was replaced by spi-fsl-qspi.c

[Schrempf Frieder <frieder.schrempf@xxxxxxxxxx>]

Hi Han,

On 14.12.18 18:05, Han Xu wrote:
> 
> 
>> -----Original Message-----
>> From: Schrempf Frieder <frieder.schrempf@xxxxxxxxxx>
>> Sent: Tuesday, December 4, 2018 8:15 AM
>> To: linux-mtd@xxxxxxxxxxxxxxxxxxx; boris.brezillon@xxxxxxxxxxx; linux-
>> spi@xxxxxxxxxxxxxxx; Marek Vasut <marek.vasut@xxxxxxxxx>
>> Cc: dwmw2@xxxxxxxxxxxxx; computersforpeace@xxxxxxxxx;
>> richard@xxxxxx; miquel.raynal@xxxxxxxxxxx; broonie@xxxxxxxxxx; David
>> Wolfe <david.wolfe@xxxxxxx>; Fabio Estevam <fabio.estevam@xxxxxxx>;
>> Prabhakar Kushwaha <prabhakar.kushwaha@xxxxxxx>; Yogesh Narayan
>> Gaur <yogeshnarayan.gaur@xxxxxxx>; Han Xu <han.xu@xxxxxxx>;
>> shawnguo@xxxxxxxxxx; Schrempf Frieder <frieder.schrempf@xxxxxxxxxx>;
>> linux-kernel@xxxxxxxxxxxxxxx
>> Subject: [PATCH v7 6/9] mtd: fsl-quadspi: Remove the driver as it was
>> replaced by spi-fsl-qspi.c
>>
>> From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
>>
>> There's a new driver using the SPI memory interface of the SPI framework at
>> spi/spi-fsl-qspi.c, which can be used together with m25p80.c to replace the
>> functionality of this SPI NOR driver.
>>
>> The new driver is already in use and this code is not compiled anymore, so
>> let's remove it.
>>
>> Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
>> ---
>>   drivers/mtd/spi-nor/fsl-quadspi.c | 1224 --------------------------------
>>   1 file changed, 1224 deletions(-)
>>
>> diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-
>> quadspi.c
>> deleted file mode 100644
>> index 1ff3430..0000000
>> --- a/drivers/mtd/spi-nor/fsl-quadspi.c
>> +++ /dev/null
>> @@ -1,1224 +0,0 @@
>> -/*
>> - * Freescale QuadSPI driver.
>> - *
>> - * Copyright (C) 2013 Freescale Semiconductor, Inc.
>> - *
>> - * This program is free software; you can redistribute it and/or modify
>> - * it under the terms of the GNU General Public License as published by
>> - * the Free Software Foundation; either version 2 of the License, or
>> - * (at your option) any later version.
>> - */
>> -#include <linux/kernel.h>
>> -#include <linux/module.h>
>> -#include <linux/interrupt.h>
>> -#include <linux/errno.h>
>> -#include <linux/platform_device.h>
>> -#include <linux/sched.h>
>> -#include <linux/delay.h>
>> -#include <linux/io.h>
>> -#include <linux/clk.h>
>> -#include <linux/err.h>
>> -#include <linux/of.h>
>> -#include <linux/of_device.h>
>> -#include <linux/timer.h>
>> -#include <linux/jiffies.h>
>> -#include <linux/completion.h>
>> -#include <linux/mtd/mtd.h>
>> -#include <linux/mtd/partitions.h>
>> -#include <linux/mtd/spi-nor.h>
>> -#include <linux/mutex.h>
>> -#include <linux/pm_qos.h>
>> -#include <linux/sizes.h>
>> -
>> -/* Controller needs driver to swap endian */
>> -#define QUADSPI_QUIRK_SWAP_ENDIAN	(1 << 0)
>> -/* Controller needs 4x internal clock */
>> -#define QUADSPI_QUIRK_4X_INT_CLK	(1 << 1)
>> -/*
>> - * TKT253890, Controller needs driver to fill txfifo till 16 byte to
>> - * trigger data transfer even though extern data will not transferred.
>> - */
>> -#define QUADSPI_QUIRK_TKT253890		(1 << 2)
>> -/* Controller cannot wake up from wait mode, TKT245618 */
>> -#define QUADSPI_QUIRK_TKT245618         (1 << 3)
>> -
>> -/* The registers */
>> -#define QUADSPI_MCR			0x00
>> -#define QUADSPI_MCR_RESERVED_SHIFT	16
>> -#define QUADSPI_MCR_RESERVED_MASK	(0xF <<
>> QUADSPI_MCR_RESERVED_SHIFT)
>> -#define QUADSPI_MCR_MDIS_SHIFT		14
>> -#define QUADSPI_MCR_MDIS_MASK		(1 <<
>> QUADSPI_MCR_MDIS_SHIFT)
>> -#define QUADSPI_MCR_CLR_TXF_SHIFT	11
>> -#define QUADSPI_MCR_CLR_TXF_MASK	(1 <<
>> QUADSPI_MCR_CLR_TXF_SHIFT)
>> -#define QUADSPI_MCR_CLR_RXF_SHIFT	10
>> -#define QUADSPI_MCR_CLR_RXF_MASK	(1 <<
>> QUADSPI_MCR_CLR_RXF_SHIFT)
>> -#define QUADSPI_MCR_DDR_EN_SHIFT	7
>> -#define QUADSPI_MCR_DDR_EN_MASK		(1 <<
>> QUADSPI_MCR_DDR_EN_SHIFT)
>> -#define QUADSPI_MCR_END_CFG_SHIFT	2
>> -#define QUADSPI_MCR_END_CFG_MASK	(3 <<
>> QUADSPI_MCR_END_CFG_SHIFT)
>> -#define QUADSPI_MCR_SWRSTHD_SHIFT	1
>> -#define QUADSPI_MCR_SWRSTHD_MASK	(1 <<
>> QUADSPI_MCR_SWRSTHD_SHIFT)
>> -#define QUADSPI_MCR_SWRSTSD_SHIFT	0
>> -#define QUADSPI_MCR_SWRSTSD_MASK	(1 <<
>> QUADSPI_MCR_SWRSTSD_SHIFT)
>> -
>> -#define QUADSPI_IPCR			0x08
>> -#define QUADSPI_IPCR_SEQID_SHIFT	24
>> -#define QUADSPI_IPCR_SEQID_MASK		(0xF <<
>> QUADSPI_IPCR_SEQID_SHIFT)
>> -
>> -#define QUADSPI_BUF0CR			0x10
>> -#define QUADSPI_BUF1CR			0x14
>> -#define QUADSPI_BUF2CR			0x18
>> -#define QUADSPI_BUFXCR_INVALID_MSTRID	0xe
>> -
>> -#define QUADSPI_BUF3CR			0x1c
>> -#define QUADSPI_BUF3CR_ALLMST_SHIFT	31
>> -#define QUADSPI_BUF3CR_ALLMST_MASK	(1 <<
>> QUADSPI_BUF3CR_ALLMST_SHIFT)
>> -#define QUADSPI_BUF3CR_ADATSZ_SHIFT		8
>> -#define QUADSPI_BUF3CR_ADATSZ_MASK	(0xFF <<
>> QUADSPI_BUF3CR_ADATSZ_SHIFT)
>> -
>> -#define QUADSPI_BFGENCR			0x20
>> -#define QUADSPI_BFGENCR_PAR_EN_SHIFT	16
>> -#define QUADSPI_BFGENCR_PAR_EN_MASK	(1 <<
>> (QUADSPI_BFGENCR_PAR_EN_SHIFT))
>> -#define QUADSPI_BFGENCR_SEQID_SHIFT	12
>> -#define QUADSPI_BFGENCR_SEQID_MASK	(0xF <<
>> QUADSPI_BFGENCR_SEQID_SHIFT)
>> -
>> -#define QUADSPI_BUF0IND			0x30
>> -#define QUADSPI_BUF1IND			0x34
>> -#define QUADSPI_BUF2IND			0x38
>> -#define QUADSPI_SFAR			0x100
>> -
>> -#define QUADSPI_SMPR			0x108
>> -#define QUADSPI_SMPR_DDRSMP_SHIFT	16
>> -#define QUADSPI_SMPR_DDRSMP_MASK	(7 <<
>> QUADSPI_SMPR_DDRSMP_SHIFT)
>> -#define QUADSPI_SMPR_FSDLY_SHIFT	6
>> -#define QUADSPI_SMPR_FSDLY_MASK		(1 <<
>> QUADSPI_SMPR_FSDLY_SHIFT)
>> -#define QUADSPI_SMPR_FSPHS_SHIFT	5
>> -#define QUADSPI_SMPR_FSPHS_MASK		(1 <<
>> QUADSPI_SMPR_FSPHS_SHIFT)
>> -#define QUADSPI_SMPR_HSENA_SHIFT	0
>> -#define QUADSPI_SMPR_HSENA_MASK		(1 <<
>> QUADSPI_SMPR_HSENA_SHIFT)
>> -
>> -#define QUADSPI_RBSR			0x10c
>> -#define QUADSPI_RBSR_RDBFL_SHIFT	8
>> -#define QUADSPI_RBSR_RDBFL_MASK		(0x3F <<
>> QUADSPI_RBSR_RDBFL_SHIFT)
>> -
>> -#define QUADSPI_RBCT			0x110
>> -#define QUADSPI_RBCT_WMRK_MASK		0x1F
>> -#define QUADSPI_RBCT_RXBRD_SHIFT	8
>> -#define QUADSPI_RBCT_RXBRD_USEIPS	(0x1 <<
>> QUADSPI_RBCT_RXBRD_SHIFT)
>> -
>> -#define QUADSPI_TBSR			0x150
>> -#define QUADSPI_TBDR			0x154
>> -#define QUADSPI_SR			0x15c
>> -#define QUADSPI_SR_IP_ACC_SHIFT		1
>> -#define QUADSPI_SR_IP_ACC_MASK		(0x1 <<
>> QUADSPI_SR_IP_ACC_SHIFT)
>> -#define QUADSPI_SR_AHB_ACC_SHIFT	2
>> -#define QUADSPI_SR_AHB_ACC_MASK		(0x1 <<
>> QUADSPI_SR_AHB_ACC_SHIFT)
>> -
>> -#define QUADSPI_FR			0x160
>> -#define QUADSPI_FR_TFF_MASK		0x1
>> -
>> -#define QUADSPI_SFA1AD			0x180
>> -#define QUADSPI_SFA2AD			0x184
>> -#define QUADSPI_SFB1AD			0x188
>> -#define QUADSPI_SFB2AD			0x18c
>> -#define QUADSPI_RBDR			0x200
>> -
>> -#define QUADSPI_LUTKEY			0x300
>> -#define QUADSPI_LUTKEY_VALUE		0x5AF05AF0
>> -
>> -#define QUADSPI_LCKCR			0x304
>> -#define QUADSPI_LCKER_LOCK		0x1
>> -#define QUADSPI_LCKER_UNLOCK		0x2
>> -
>> -#define QUADSPI_RSER			0x164
>> -#define QUADSPI_RSER_TFIE		(0x1 << 0)
>> -
>> -#define QUADSPI_LUT_BASE		0x310
>> -
>> -/*
>> - * The definition of the LUT register shows below:
>> - *
>> - *  ---------------------------------------------------
>> - *  | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 |
>> - *  ---------------------------------------------------
>> - */
>> -#define OPRND0_SHIFT		0
>> -#define PAD0_SHIFT		8
>> -#define INSTR0_SHIFT		10
>> -#define OPRND1_SHIFT		16
>> -
>> -/* Instruction set for the LUT register. */
>> -#define LUT_STOP		0
>> -#define LUT_CMD			1
>> -#define LUT_ADDR		2
>> -#define LUT_DUMMY		3
>> -#define LUT_MODE		4
>> -#define LUT_MODE2		5
>> -#define LUT_MODE4		6
>> -#define LUT_FSL_READ		7
>> -#define LUT_FSL_WRITE		8
>> -#define LUT_JMP_ON_CS		9
>> -#define LUT_ADDR_DDR		10
>> -#define LUT_MODE_DDR		11
>> -#define LUT_MODE2_DDR		12
>> -#define LUT_MODE4_DDR		13
>> -#define LUT_FSL_READ_DDR		14
>> -#define LUT_FSL_WRITE_DDR		15
>> -#define LUT_DATA_LEARN		16
>> -
>> -/*
>> - * The PAD definitions for LUT register.
>> - *
>> - * The pad stands for the lines number of IO[0:3].
>> - * For example, the Quad read need four IO lines, so you should
>> - * set LUT_PAD4 which means we use four IO lines.
>> - */
>> -#define LUT_PAD1		0
>> -#define LUT_PAD2		1
>> -#define LUT_PAD4		2
>> -
>> -/* Oprands for the LUT register. */
>> -#define ADDR24BIT		0x18
>> -#define ADDR32BIT		0x20
>> -
>> -/* Macros for constructing the LUT register. */
>> -#define LUT0(ins, pad, opr)						\
>> -		(((opr) << OPRND0_SHIFT) | ((LUT_##pad) << PAD0_SHIFT) | \
>> -		((LUT_##ins) << INSTR0_SHIFT))
>> -
>> -#define LUT1(ins, pad, opr)	(LUT0(ins, pad, opr) << OPRND1_SHIFT)
>> -
>> -/* other macros for LUT register. */
>> -#define QUADSPI_LUT(x)          (QUADSPI_LUT_BASE + (x) * 4)
>> -#define QUADSPI_LUT_NUM		64
>> -
>> -/* SEQID -- we can have 16 seqids at most. */
>> -#define SEQID_READ		0
>> -#define SEQID_WREN		1
>> -#define SEQID_WRDI		2
>> -#define SEQID_RDSR		3
>> -#define SEQID_SE		4
>> -#define SEQID_CHIP_ERASE	5
>> -#define SEQID_PP		6
>> -#define SEQID_RDID		7
>> -#define SEQID_WRSR		8
>> -#define SEQID_RDCR		9
>> -#define SEQID_EN4B		10
>> -#define SEQID_BRWR		11
>> -
>> -#define QUADSPI_MIN_IOMAP SZ_4M
>> -
>> -enum fsl_qspi_devtype {
>> -	FSL_QUADSPI_VYBRID,
>> -	FSL_QUADSPI_IMX6SX,
>> -	FSL_QUADSPI_IMX7D,
>> -	FSL_QUADSPI_IMX6UL,
>> -	FSL_QUADSPI_LS1021A,
>> -	FSL_QUADSPI_LS2080A,
>> -};
>> -
>> -struct fsl_qspi_devtype_data {
>> -	enum fsl_qspi_devtype devtype;
>> -	int rxfifo;
>> -	int txfifo;
>> -	int ahb_buf_size;
>> -	int driver_data;
>> -};
>> -
>> -static const struct fsl_qspi_devtype_data vybrid_data = {
>> -	.devtype = FSL_QUADSPI_VYBRID,
>> -	.rxfifo = 128,
>> -	.txfifo = 64,
>> -	.ahb_buf_size = 1024,
>> -	.driver_data = QUADSPI_QUIRK_SWAP_ENDIAN,
>> -};
>> -
>> -static const struct fsl_qspi_devtype_data imx6sx_data = {
>> -	.devtype = FSL_QUADSPI_IMX6SX,
>> -	.rxfifo = 128,
>> -	.txfifo = 512,
>> -	.ahb_buf_size = 1024,
>> -	.driver_data = QUADSPI_QUIRK_4X_INT_CLK
>> -		       | QUADSPI_QUIRK_TKT245618,
>> -};
>> -
>> -static const struct fsl_qspi_devtype_data imx7d_data = {
>> -	.devtype = FSL_QUADSPI_IMX7D,
>> -	.rxfifo = 512,
>> -	.txfifo = 512,
>> -	.ahb_buf_size = 1024,
>> -	.driver_data = QUADSPI_QUIRK_TKT253890
>> -		       | QUADSPI_QUIRK_4X_INT_CLK,
>> -};
>> -
>> -static const struct fsl_qspi_devtype_data imx6ul_data = {
>> -	.devtype = FSL_QUADSPI_IMX6UL,
>> -	.rxfifo = 128,
>> -	.txfifo = 512,
>> -	.ahb_buf_size = 1024,
>> -	.driver_data = QUADSPI_QUIRK_TKT253890
>> -		       | QUADSPI_QUIRK_4X_INT_CLK,
>> -};
>> -
>> -static struct fsl_qspi_devtype_data ls1021a_data = {
>> -	.devtype = FSL_QUADSPI_LS1021A,
>> -	.rxfifo = 128,
>> -	.txfifo = 64,
>> -	.ahb_buf_size = 1024,
>> -	.driver_data = 0,
>> -};
>> -
>> -static const struct fsl_qspi_devtype_data ls2080a_data = {
>> -	.devtype = FSL_QUADSPI_LS2080A,
>> -	.rxfifo = 128,
>> -	.txfifo = 64,
>> -	.ahb_buf_size = 1024,
>> -	.driver_data = QUADSPI_QUIRK_TKT253890,
>> -};
>> -
>> -
>> -#define FSL_QSPI_MAX_CHIP	4
>> -struct fsl_qspi {
>> -	struct spi_nor nor[FSL_QSPI_MAX_CHIP];
>> -	void __iomem *iobase;
>> -	void __iomem *ahb_addr;
>> -	u32 memmap_phy;
>> -	u32 memmap_offs;
>> -	u32 memmap_len;
>> -	struct clk *clk, *clk_en;
>> -	struct device *dev;
>> -	struct completion c;
>> -	const struct fsl_qspi_devtype_data *devtype_data;
>> -	u32 nor_size;
>> -	u32 nor_num;
>> -	u32 clk_rate;
>> -	unsigned int chip_base_addr; /* We may support two chips. */
>> -	bool has_second_chip;
>> -	bool big_endian;
>> -	struct mutex lock;
>> -	struct pm_qos_request pm_qos_req;
>> -};
>> -
>> -static inline int needs_swap_endian(struct fsl_qspi *q) -{
>> -	return q->devtype_data->driver_data &
>> QUADSPI_QUIRK_SWAP_ENDIAN;
>> -}
>> -
>> -static inline int needs_4x_clock(struct fsl_qspi *q) -{
>> -	return q->devtype_data->driver_data &
>> QUADSPI_QUIRK_4X_INT_CLK;
>> -}
>> -
>> -static inline int needs_fill_txfifo(struct fsl_qspi *q) -{
>> -	return q->devtype_data->driver_data & QUADSPI_QUIRK_TKT253890;
>> -}
>> -
>> -static inline int needs_wakeup_wait_mode(struct fsl_qspi *q) -{
>> -	return q->devtype_data->driver_data & QUADSPI_QUIRK_TKT245618;
>> -}
>> -
>> -/*
>> - * R/W functions for big- or little-endian registers:
>> - * The qSPI controller's endian is independent of the CPU core's endian.
>> - * So far, although the CPU core is little-endian but the qSPI have two
>> - * versions for big-endian and little-endian.
>> - */
>> -static void qspi_writel(struct fsl_qspi *q, u32 val, void __iomem *addr) -{
>> -	if (q->big_endian)
>> -		iowrite32be(val, addr);
>> -	else
>> -		iowrite32(val, addr);
>> -}
>> -
>> -static u32 qspi_readl(struct fsl_qspi *q, void __iomem *addr) -{
>> -	if (q->big_endian)
>> -		return ioread32be(addr);
>> -	else
>> -		return ioread32(addr);
>> -}
>> -
>> -/*
>> - * An IC bug makes us to re-arrange the 32-bit data.
>> - * The following chips, such as IMX6SLX, have fixed this bug.
>> - */
>> -static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a) -{
>> -	return needs_swap_endian(q) ? __swab32(a) : a;
>> -}
>> -
>> -static inline void fsl_qspi_unlock_lut(struct fsl_qspi *q) -{
>> -	qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase +
>> QUADSPI_LUTKEY);
>> -	qspi_writel(q, QUADSPI_LCKER_UNLOCK, q->iobase +
>> QUADSPI_LCKCR);
>> -}
>> -
>> -static inline void fsl_qspi_lock_lut(struct fsl_qspi *q) -{
>> -	qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase +
>> QUADSPI_LUTKEY);
>> -	qspi_writel(q, QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR);
>> -}
>> -
>> -static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id) -{
>> -	struct fsl_qspi *q = dev_id;
>> -	u32 reg;
>> -
>> -	/* clear interrupt */
>> -	reg = qspi_readl(q, q->iobase + QUADSPI_FR);
>> -	qspi_writel(q, reg, q->iobase + QUADSPI_FR);
>> -
>> -	if (reg & QUADSPI_FR_TFF_MASK)
>> -		complete(&q->c);
>> -
>> -	dev_dbg(q->dev, "QUADSPI_FR : 0x%.8x:0x%.8x\n", q-
>>> chip_base_addr, reg);
>> -	return IRQ_HANDLED;
>> -}
>> -
>> -static void fsl_qspi_init_lut(struct fsl_qspi *q) -{
>> -	void __iomem *base = q->iobase;
>> -	int rxfifo = q->devtype_data->rxfifo;
>> -	u32 lut_base;
>> -	int i;
>> -
>> -	struct spi_nor *nor = &q->nor[0];
>> -	u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT;
>> -	u8 read_op = nor->read_opcode;
>> -	u8 read_dm = nor->read_dummy;
>> -
>> -	fsl_qspi_unlock_lut(q);
>> -
>> -	/* Clear all the LUT table */
>> -	for (i = 0; i < QUADSPI_LUT_NUM; i++)
>> -		qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4);
>> -
>> -	/* Read */
>> -	lut_base = SEQID_READ * 4;
>> -
>> -	qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1,
>> addrlen),
>> -			base + QUADSPI_LUT(lut_base));
>> -	qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) |
>> -		    LUT1(FSL_READ, PAD4, rxfifo),
>> -			base + QUADSPI_LUT(lut_base + 1));
>> -
>> -	/* Write enable */
>> -	lut_base = SEQID_WREN * 4;
>> -	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WREN),
>> -			base + QUADSPI_LUT(lut_base));
>> -
>> -	/* Page Program */
>> -	lut_base = SEQID_PP * 4;
>> -
>> -	qspi_writel(q, LUT0(CMD, PAD1, nor->program_opcode) |
>> -		    LUT1(ADDR, PAD1, addrlen),
>> -			base + QUADSPI_LUT(lut_base));
>> -	qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0),
>> -			base + QUADSPI_LUT(lut_base + 1));
>> -
>> -	/* Read Status */
>> -	lut_base = SEQID_RDSR * 4;
>> -	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDSR) |
>> -			LUT1(FSL_READ, PAD1, 0x1),
>> -			base + QUADSPI_LUT(lut_base));
>> -
>> -	/* Erase a sector */
>> -	lut_base = SEQID_SE * 4;
>> -
>> -	qspi_writel(q, LUT0(CMD, PAD1, nor->erase_opcode) |
>> -		    LUT1(ADDR, PAD1, addrlen),
>> -			base + QUADSPI_LUT(lut_base));
>> -
>> -	/* Erase the whole chip */
>> -	lut_base = SEQID_CHIP_ERASE * 4;
>> -	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE),
>> -			base + QUADSPI_LUT(lut_base));
>> -
>> -	/* READ ID */
>> -	lut_base = SEQID_RDID * 4;
>> -	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDID) |
>> -			LUT1(FSL_READ, PAD1, 0x8),
>> -			base + QUADSPI_LUT(lut_base));
>> -
>> -	/* Write Register */
>> -	lut_base = SEQID_WRSR * 4;
>> -	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRSR) |
>> -			LUT1(FSL_WRITE, PAD1, 0x2),
>> -			base + QUADSPI_LUT(lut_base));
>> -
>> -	/* Read Configuration Register */
>> -	lut_base = SEQID_RDCR * 4;
>> -	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDCR) |
>> -			LUT1(FSL_READ, PAD1, 0x1),
>> -			base + QUADSPI_LUT(lut_base));
>> -
>> -	/* Write disable */
>> -	lut_base = SEQID_WRDI * 4;
>> -	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRDI),
>> -			base + QUADSPI_LUT(lut_base));
>> -
>> -	/* Enter 4 Byte Mode (Micron) */
>> -	lut_base = SEQID_EN4B * 4;
>> -	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_EN4B),
>> -			base + QUADSPI_LUT(lut_base));
>> -
>> -	/* Enter 4 Byte Mode (Spansion) */
>> -	lut_base = SEQID_BRWR * 4;
>> -	qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_BRWR),
>> -			base + QUADSPI_LUT(lut_base));
>> -
>> -	fsl_qspi_lock_lut(q);
>> -}
>> -
>> -/* Get the SEQID for the command */
>> -static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) -{
>> -	switch (cmd) {
>> -	case SPINOR_OP_READ_1_1_4:
>> -	case SPINOR_OP_READ_1_1_4_4B:
>> -		return SEQID_READ;
>> -	case SPINOR_OP_WREN:
>> -		return SEQID_WREN;
>> -	case SPINOR_OP_WRDI:
>> -		return SEQID_WRDI;
>> -	case SPINOR_OP_RDSR:
>> -		return SEQID_RDSR;
>> -	case SPINOR_OP_SE:
>> -		return SEQID_SE;
>> -	case SPINOR_OP_CHIP_ERASE:
>> -		return SEQID_CHIP_ERASE;
>> -	case SPINOR_OP_PP:
>> -		return SEQID_PP;
>> -	case SPINOR_OP_RDID:
>> -		return SEQID_RDID;
>> -	case SPINOR_OP_WRSR:
>> -		return SEQID_WRSR;
>> -	case SPINOR_OP_RDCR:
>> -		return SEQID_RDCR;
>> -	case SPINOR_OP_EN4B:
>> -		return SEQID_EN4B;
>> -	case SPINOR_OP_BRWR:
>> -		return SEQID_BRWR;
>> -	default:
>> -		if (cmd == q->nor[0].erase_opcode)
>> -			return SEQID_SE;
>> -		dev_err(q->dev, "Unsupported cmd 0x%.2x\n", cmd);
>> -		break;
>> -	}
>> -	return -EINVAL;
>> -}
>> -
>> -static int
>> -fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len) -{
>> -	void __iomem *base = q->iobase;
>> -	int seqid;
>> -	u32 reg, reg2;
>> -	int err;
>> -
>> -	init_completion(&q->c);
>> -	dev_dbg(q->dev, "to 0x%.8x:0x%.8x, len:%d, cmd:%.2x\n",
>> -			q->chip_base_addr, addr, len, cmd);
>> -
>> -	/* save the reg */
>> -	reg = qspi_readl(q, base + QUADSPI_MCR);
>> -
>> -	qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr,
>> -			base + QUADSPI_SFAR);
>> -	qspi_writel(q, QUADSPI_RBCT_WMRK_MASK |
>> QUADSPI_RBCT_RXBRD_USEIPS,
>> -			base + QUADSPI_RBCT);
>> -	qspi_writel(q, reg | QUADSPI_MCR_CLR_RXF_MASK, base +
>> QUADSPI_MCR);
>> -
>> -	do {
>> -		reg2 = qspi_readl(q, base + QUADSPI_SR);
>> -		if (reg2 & (QUADSPI_SR_IP_ACC_MASK |
>> QUADSPI_SR_AHB_ACC_MASK)) {
>> -			udelay(1);
>> -			dev_dbg(q->dev, "The controller is busy, 0x%x\n",
>> reg2);
>> -			continue;
>> -		}
>> -		break;
>> -	} while (1);
>> -
>> -	/* trigger the LUT now */
>> -	seqid = fsl_qspi_get_seqid(q, cmd);
>> -	if (seqid < 0)
>> -		return seqid;
>> -
>> -	qspi_writel(q, (seqid << QUADSPI_IPCR_SEQID_SHIFT) | len,
>> -			base + QUADSPI_IPCR);
>> -
>> -	/* Wait for the interrupt. */
>> -	if (!wait_for_completion_timeout(&q->c, msecs_to_jiffies(1000))) {
>> -		dev_err(q->dev,
>> -			"cmd 0x%.2x timeout, addr@%.8x, FR:0x%.8x,
>> SR:0x%.8x\n",
>> -			cmd, addr, qspi_readl(q, base + QUADSPI_FR),
>> -			qspi_readl(q, base + QUADSPI_SR));
>> -		err = -ETIMEDOUT;
>> -	} else {
>> -		err = 0;
>> -	}
>> -
>> -	/* restore the MCR */
>> -	qspi_writel(q, reg, base + QUADSPI_MCR);
>> -
>> -	return err;
>> -}
>> -
>> -/* Read out the data from the QUADSPI_RBDR buffer registers. */ -static
>> void fsl_qspi_read_data(struct fsl_qspi *q, int len, u8 *rxbuf) -{
>> -	u32 tmp;
>> -	int i = 0;
>> -
>> -	while (len > 0) {
>> -		tmp = qspi_readl(q, q->iobase + QUADSPI_RBDR + i * 4);
>> -		tmp = fsl_qspi_endian_xchg(q, tmp);
>> -		dev_dbg(q->dev, "chip addr:0x%.8x, rcv:0x%.8x\n",
>> -				q->chip_base_addr, tmp);
>> -
>> -		if (len >= 4) {
>> -			*((u32 *)rxbuf) = tmp;
>> -			rxbuf += 4;
>> -		} else {
>> -			memcpy(rxbuf, &tmp, len);
>> -			break;
>> -		}
>> -
>> -		len -= 4;
>> -		i++;
>> -	}
>> -}
>> -
>> -/*
>> - * If we have changed the content of the flash by writing or erasing,
>> - * we need to invalidate the AHB buffer. If we do not do so, we may read
>> out
>> - * the wrong data. The spec tells us reset the AHB domain and Serial Flash
>> - * domain at the same time.
>> - */
>> -static inline void fsl_qspi_invalid(struct fsl_qspi *q) -{
>> -	u32 reg;
>> -
>> -	reg = qspi_readl(q, q->iobase + QUADSPI_MCR);
>> -	reg |= QUADSPI_MCR_SWRSTHD_MASK |
>> QUADSPI_MCR_SWRSTSD_MASK;
>> -	qspi_writel(q, reg, q->iobase + QUADSPI_MCR);
>> -
>> -	/*
>> -	 * The minimum delay : 1 AHB + 2 SFCK clocks.
>> -	 * Delay 1 us is enough.
>> -	 */
>> -	udelay(1);
>> -
>> -	reg &= ~(QUADSPI_MCR_SWRSTHD_MASK |
>> QUADSPI_MCR_SWRSTSD_MASK);
>> -	qspi_writel(q, reg, q->iobase + QUADSPI_MCR);
>> -}
>> -
>> -static ssize_t fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
>> -				u8 opcode, unsigned int to, u32 *txbuf,
>> -				unsigned count)
>> -{
>> -	int ret, i, j;
>> -	u32 tmp;
>> -
>> -	dev_dbg(q->dev, "to 0x%.8x:0x%.8x, len : %d\n",
>> -		q->chip_base_addr, to, count);
>> -
>> -	/* clear the TX FIFO. */
>> -	tmp = qspi_readl(q, q->iobase + QUADSPI_MCR);
>> -	qspi_writel(q, tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase +
>> QUADSPI_MCR);
>> -
>> -	/* fill the TX data to the FIFO */
>> -	for (j = 0, i = ((count + 3) / 4); j < i; j++) {
>> -		tmp = fsl_qspi_endian_xchg(q, *txbuf);
>> -		qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR);
>> -		txbuf++;
>> -	}
>> -
>> -	/* fill the TXFIFO upto 16 bytes for i.MX7d */
>> -	if (needs_fill_txfifo(q))
>> -		for (; i < 4; i++)
>> -			qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR);
>> -
>> -	/* Trigger it */
>> -	ret = fsl_qspi_runcmd(q, opcode, to, count);
>> -
>> -	if (ret == 0)
>> -		return count;
>> -
>> -	return ret;
>> -}
>> -
>> -static void fsl_qspi_set_map_addr(struct fsl_qspi *q) -{
>> -	int nor_size = q->nor_size;
>> -	void __iomem *base = q->iobase;
>> -
>> -	qspi_writel(q, nor_size + q->memmap_phy, base +
>> QUADSPI_SFA1AD);
>> -	qspi_writel(q, nor_size * 2 + q->memmap_phy, base +
>> QUADSPI_SFA2AD);
>> -	qspi_writel(q, nor_size * 3 + q->memmap_phy, base +
>> QUADSPI_SFB1AD);
>> -	qspi_writel(q, nor_size * 4 + q->memmap_phy, base +
>> QUADSPI_SFB2AD);
>> -}
>> -
>> -/*
>> - * There are two different ways to read out the data from the flash:
>> - *  the "IP Command Read" and the "AHB Command Read".
>> - *
>> - * The IC guy suggests we use the "AHB Command Read" which is faster
>> - * then the "IP Command Read". (What's more is that there is a bug in
>> - * the "IP Command Read" in the Vybrid.)
>> - *
>> - * After we set up the registers for the "AHB Command Read", we can use
>> - * the memcpy to read the data directly. A "missed" access to the buffer
>> - * causes the controller to clear the buffer, and use the sequence pointed
>> - * by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash.
>> - */
>> -static int fsl_qspi_init_ahb_read(struct fsl_qspi *q) -{
>> -	void __iomem *base = q->iobase;
>> -	int seqid;
>> -
>> -	/* AHB configuration for access buffer 0/1/2 .*/
>> -	qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base +
>> QUADSPI_BUF0CR);
>> -	qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base +
>> QUADSPI_BUF1CR);
>> -	qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base +
>> QUADSPI_BUF2CR);
>> -	/*
>> -	 * Set ADATSZ with the maximum AHB buffer size to improve the
>> -	 * read performance.
>> -	 */
>> -	qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK |
>> -			((q->devtype_data->ahb_buf_size / 8)
>> -			<< QUADSPI_BUF3CR_ADATSZ_SHIFT),
>> -			base + QUADSPI_BUF3CR);
>> -
>> -	/* We only use the buffer3 */
>> -	qspi_writel(q, 0, base + QUADSPI_BUF0IND);
>> -	qspi_writel(q, 0, base + QUADSPI_BUF1IND);
>> -	qspi_writel(q, 0, base + QUADSPI_BUF2IND);
>> -
>> -	/* Set the default lut sequence for AHB Read. */
>> -	seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode);
>> -	if (seqid < 0)
>> -		return seqid;
>> -
>> -	qspi_writel(q, seqid << QUADSPI_BFGENCR_SEQID_SHIFT,
>> -		q->iobase + QUADSPI_BFGENCR);
>> -
>> -	return 0;
>> -}
>> -
>> -/* This function was used to prepare and enable QSPI clock */ -static int
>> fsl_qspi_clk_prep_enable(struct fsl_qspi *q) -{
>> -	int ret;
>> -
>> -	ret = clk_prepare_enable(q->clk_en);
>> -	if (ret)
>> -		return ret;
>> -
>> -	ret = clk_prepare_enable(q->clk);
>> -	if (ret) {
>> -		clk_disable_unprepare(q->clk_en);
>> -		return ret;
>> -	}
>> -
>> -	if (needs_wakeup_wait_mode(q))
>> -		pm_qos_add_request(&q->pm_qos_req,
>> PM_QOS_CPU_DMA_LATENCY, 0);
>> -
>> -	return 0;
>> -}
>> -
>> -/* This function was used to disable and unprepare QSPI clock */ -static void
>> fsl_qspi_clk_disable_unprep(struct fsl_qspi *q) -{
>> -	if (needs_wakeup_wait_mode(q))
>> -		pm_qos_remove_request(&q->pm_qos_req);
>> -
>> -	clk_disable_unprepare(q->clk);
>> -	clk_disable_unprepare(q->clk_en);
>> -
>> -}
>> -
>> -/* We use this function to do some basic init for spi_nor_scan(). */ -static int
>> fsl_qspi_nor_setup(struct fsl_qspi *q) -{
>> -	void __iomem *base = q->iobase;
>> -	u32 reg;
>> -	int ret;
>> -
>> -	/* disable and unprepare clock to avoid glitch pass to controller */
>> -	fsl_qspi_clk_disable_unprep(q);
>> -
>> -	/* the default frequency, we will change it in the future. */
>> -	ret = clk_set_rate(q->clk, 66000000);
>> -	if (ret)
>> -		return ret;
>> -
>> -	ret = fsl_qspi_clk_prep_enable(q);
>> -	if (ret)
>> -		return ret;
>> -
>> -	/* Reset the module */
>> -	qspi_writel(q, QUADSPI_MCR_SWRSTSD_MASK |
>> QUADSPI_MCR_SWRSTHD_MASK,
>> -		base + QUADSPI_MCR);
>> -	udelay(1);
>> -
>> -	/* Init the LUT table. */
>> -	fsl_qspi_init_lut(q);
>> -
>> -	/* Disable the module */
>> -	qspi_writel(q, QUADSPI_MCR_MDIS_MASK |
>> QUADSPI_MCR_RESERVED_MASK,
>> -			base + QUADSPI_MCR);
>> -
>> -	reg = qspi_readl(q, base + QUADSPI_SMPR);
>> -	qspi_writel(q, reg & ~(QUADSPI_SMPR_FSDLY_MASK
>> -			| QUADSPI_SMPR_FSPHS_MASK
>> -			| QUADSPI_SMPR_HSENA_MASK
>> -			| QUADSPI_SMPR_DDRSMP_MASK), base +
>> QUADSPI_SMPR);
>> -
>> -	/* Enable the module */
>> -	qspi_writel(q, QUADSPI_MCR_RESERVED_MASK |
>> QUADSPI_MCR_END_CFG_MASK,
>> -			base + QUADSPI_MCR);
>> -
>> -	/* clear all interrupt status */
>> -	qspi_writel(q, 0xffffffff, q->iobase + QUADSPI_FR);
>> -
>> -	/* enable the interrupt */
>> -	qspi_writel(q, QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER);
>> -
>> -	return 0;
>> -}
>> -
>> -static int fsl_qspi_nor_setup_last(struct fsl_qspi *q) -{
>> -	unsigned long rate = q->clk_rate;
>> -	int ret;
>> -
>> -	if (needs_4x_clock(q))
>> -		rate *= 4;
>> -
>> -	/* disable and unprepare clock to avoid glitch pass to controller */
>> -	fsl_qspi_clk_disable_unprep(q);
>> -
>> -	ret = clk_set_rate(q->clk, rate);
>> -	if (ret)
>> -		return ret;
>> -
>> -	ret = fsl_qspi_clk_prep_enable(q);
>> -	if (ret)
>> -		return ret;
>> -
>> -	/* Init the LUT table again. */
>> -	fsl_qspi_init_lut(q);
>> -
>> -	/* Init for AHB read */
>> -	return fsl_qspi_init_ahb_read(q);
>> -}
>> -
>> -static const struct of_device_id fsl_qspi_dt_ids[] = {
>> -	{ .compatible = "fsl,vf610-qspi", .data = &vybrid_data, },
>> -	{ .compatible = "fsl,imx6sx-qspi", .data = &imx6sx_data, },
>> -	{ .compatible = "fsl,imx7d-qspi", .data = &imx7d_data, },
>> -	{ .compatible = "fsl,imx6ul-qspi", .data = &imx6ul_data, },
>> -	{ .compatible = "fsl,ls1021a-qspi", .data = (void *)&ls1021a_data, },
>> -	{ .compatible = "fsl,ls2080a-qspi", .data = &ls2080a_data, },
>> -	{ /* sentinel */ }
>> -};
>> -MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
>> -
>> -static void fsl_qspi_set_base_addr(struct fsl_qspi *q, struct spi_nor *nor) -{
>> -	q->chip_base_addr = q->nor_size * (nor - q->nor);
>> -}
>> -
>> -static int fsl_qspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
>> -{
>> -	int ret;
>> -	struct fsl_qspi *q = nor->priv;
>> -
>> -	ret = fsl_qspi_runcmd(q, opcode, 0, len);
>> -	if (ret)
>> -		return ret;
>> -
>> -	fsl_qspi_read_data(q, len, buf);
>> -	return 0;
>> -}
>> -
>> -static int fsl_qspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
>> -{
>> -	struct fsl_qspi *q = nor->priv;
>> -	int ret;
>> -
>> -	if (!buf) {
>> -		ret = fsl_qspi_runcmd(q, opcode, 0, 1);
>> -		if (ret)
>> -			return ret;
>> -
>> -		if (opcode == SPINOR_OP_CHIP_ERASE)
>> -			fsl_qspi_invalid(q);
>> -
>> -	} else if (len > 0) {
>> -		ret = fsl_qspi_nor_write(q, nor, opcode, 0,
>> -					(u32 *)buf, len);
>> -		if (ret > 0)
>> -			return 0;
>> -	} else {
>> -		dev_err(q->dev, "invalid cmd %d\n", opcode);
>> -		ret = -EINVAL;
>> -	}
>> -
>> -	return ret;
>> -}
>> -
>> -static ssize_t fsl_qspi_write(struct spi_nor *nor, loff_t to,
>> -			      size_t len, const u_char *buf)
>> -{
>> -	struct fsl_qspi *q = nor->priv;
>> -	ssize_t ret = fsl_qspi_nor_write(q, nor, nor->program_opcode, to,
>> -					 (u32 *)buf, len);
>> -
>> -	/* invalid the data in the AHB buffer. */
>> -	fsl_qspi_invalid(q);
>> -	return ret;
>> -}
>> -
>> -static ssize_t fsl_qspi_read(struct spi_nor *nor, loff_t from,
>> -			     size_t len, u_char *buf)
>> -{
>> -	struct fsl_qspi *q = nor->priv;
>> -	u8 cmd = nor->read_opcode;
>> -
>> -	/* if necessary,ioremap buffer before AHB read, */
>> -	if (!q->ahb_addr) {
>> -		q->memmap_offs = q->chip_base_addr + from;
>> -		q->memmap_len = len > QUADSPI_MIN_IOMAP ? len :
>> QUADSPI_MIN_IOMAP;
>> -
>> -		q->ahb_addr = ioremap_nocache(
>> -				q->memmap_phy + q->memmap_offs,
>> -				q->memmap_len);
>> -		if (!q->ahb_addr) {
>> -			dev_err(q->dev, "ioremap failed\n");
>> -			return -ENOMEM;
>> -		}
>> -	/* ioremap if the data requested is out of range */
>> -	} else if (q->chip_base_addr + from < q->memmap_offs
>> -			|| q->chip_base_addr + from + len >
>> -			q->memmap_offs + q->memmap_len) {
>> -		iounmap(q->ahb_addr);
>> -
>> -		q->memmap_offs = q->chip_base_addr + from;
>> -		q->memmap_len = len > QUADSPI_MIN_IOMAP ? len :
>> QUADSPI_MIN_IOMAP;
>> -		q->ahb_addr = ioremap_nocache(
>> -				q->memmap_phy + q->memmap_offs,
>> -				q->memmap_len);
>> -		if (!q->ahb_addr) {
>> -			dev_err(q->dev, "ioremap failed\n");
>> -			return -ENOMEM;
>> -		}
>> -	}
>> -
>> -	dev_dbg(q->dev, "cmd [%x],read from %p, len:%zd\n",
>> -		cmd, q->ahb_addr + q->chip_base_addr + from - q-
>>> memmap_offs,
>> -		len);
>> -
>> -	/* Read out the data directly from the AHB buffer.*/
>> -	memcpy(buf, q->ahb_addr + q->chip_base_addr + from - q-
>>> memmap_offs,
>> -		len);
>> -
>> -	return len;
>> -}
>> -
>> -static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs) -{
>> -	struct fsl_qspi *q = nor->priv;
>> -	int ret;
>> -
>> -	dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n",
>> -		nor->mtd.erasesize / 1024, q->chip_base_addr, (u32)offs);
>> -
>> -	ret = fsl_qspi_runcmd(q, nor->erase_opcode, offs, 0);
>> -	if (ret)
>> -		return ret;
>> -
>> -	fsl_qspi_invalid(q);
>> -	return 0;
>> -}
>> -
>> -static int fsl_qspi_prep(struct spi_nor *nor, enum spi_nor_ops ops) -{
>> -	struct fsl_qspi *q = nor->priv;
>> -	int ret;
>> -
>> -	mutex_lock(&q->lock);
>> -
>> -	ret = fsl_qspi_clk_prep_enable(q);
>> -	if (ret)
>> -		goto err_mutex;
>> -
>> -	fsl_qspi_set_base_addr(q, nor);
>> -	return 0;
>> -
>> -err_mutex:
>> -	mutex_unlock(&q->lock);
>> -	return ret;
>> -}
>> -
>> -static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops) -{
>> -	struct fsl_qspi *q = nor->priv;
>> -
>> -	fsl_qspi_clk_disable_unprep(q);
>> -	mutex_unlock(&q->lock);
>> -}
>> -
>> -static int fsl_qspi_probe(struct platform_device *pdev) -{
>> -	const struct spi_nor_hwcaps hwcaps = {
>> -		.mask = SNOR_HWCAPS_READ_1_1_4 |
>> -			SNOR_HWCAPS_PP,
>> -	};
>> -	struct device_node *np = pdev->dev.of_node;
>> -	struct device *dev = &pdev->dev;
>> -	struct fsl_qspi *q;
>> -	struct resource *res;
>> -	struct spi_nor *nor;
>> -	struct mtd_info *mtd;
>> -	int ret, i = 0;
>> -
>> -	q = devm_kzalloc(dev, sizeof(*q), GFP_KERNEL);
>> -	if (!q)
>> -		return -ENOMEM;
>> -
>> -	q->nor_num = of_get_child_count(dev->of_node);
>> -	if (!q->nor_num || q->nor_num > FSL_QSPI_MAX_CHIP)
>> -		return -ENODEV;
>> -
>> -	q->dev = dev;
>> -	q->devtype_data = of_device_get_match_data(dev);
>> -	if (!q->devtype_data)
>> -		return -ENODEV;
>> -	platform_set_drvdata(pdev, q);
>> -
>> -	/* find the resources */
>> -	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>> "QuadSPI");
>> -	q->iobase = devm_ioremap_resource(dev, res);
>> -	if (IS_ERR(q->iobase))
>> -		return PTR_ERR(q->iobase);
>> -
>> -	q->big_endian = of_property_read_bool(np, "big-endian");
>> -	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>> -					"QuadSPI-memory");
>> -	if (!devm_request_mem_region(dev, res->start, resource_size(res),
>> -				     res->name)) {
>> -		dev_err(dev, "can't request region for resource %pR\n", res);
>> -		return -EBUSY;
>> -	}
>> -
>> -	q->memmap_phy = res->start;
>> -
>> -	/* find the clocks */
>> -	q->clk_en = devm_clk_get(dev, "qspi_en");
>> -	if (IS_ERR(q->clk_en))
>> -		return PTR_ERR(q->clk_en);
>> -
>> -	q->clk = devm_clk_get(dev, "qspi");
>> -	if (IS_ERR(q->clk))
>> -		return PTR_ERR(q->clk);
>> -
>> -	ret = fsl_qspi_clk_prep_enable(q);
>> -	if (ret) {
>> -		dev_err(dev, "can not enable the clock\n");
>> -		goto clk_failed;
>> -	}
>> -
>> -	/* find the irq */
>> -	ret = platform_get_irq(pdev, 0);
>> -	if (ret < 0) {
>> -		dev_err(dev, "failed to get the irq: %d\n", ret);
>> -		goto irq_failed;
>> -	}
>> -
>> -	ret = devm_request_irq(dev, ret,
>> -			fsl_qspi_irq_handler, 0, pdev->name, q);
>> -	if (ret) {
>> -		dev_err(dev, "failed to request irq: %d\n", ret);
>> -		goto irq_failed;
>> -	}
>> -
>> -	ret = fsl_qspi_nor_setup(q);
>> -	if (ret)
>> -		goto irq_failed;
>> -
>> -	if (of_get_property(np, "fsl,qspi-has-second-chip", NULL))
>> -		q->has_second_chip = true;
>> -
>> -	mutex_init(&q->lock);
>> -
>> -	/* iterate the subnodes. */
>> -	for_each_available_child_of_node(dev->of_node, np) {
>> -		/* skip the holes */
>> -		if (!q->has_second_chip)
>> -			i *= 2;
>> -
>> -		nor = &q->nor[i];
>> -		mtd = &nor->mtd;
>> -
>> -		nor->dev = dev;
>> -		spi_nor_set_flash_node(nor, np);
>> -		nor->priv = q;
>> -
>> -		if (q->nor_num > 1 && !mtd->name) {
>> -			int spiflash_idx;
>> -
>> -			ret = of_property_read_u32(np, "reg", &spiflash_idx);
>> -			if (!ret) {
>> -				mtd->name = devm_kasprintf(dev,
>> GFP_KERNEL,
>> -							   "%s-%d",
>> -							   dev_name(dev),
>> -							   spiflash_idx);
>> -				if (!mtd->name) {
>> -					ret = -ENOMEM;
>> -					goto mutex_failed;
>> -				}
>> -			} else {
>> -				dev_warn(dev, "reg property is missing\n");
>> -			}
>> -		}
>> -
>> -		/* fill the hooks */
>> -		nor->read_reg = fsl_qspi_read_reg;
>> -		nor->write_reg = fsl_qspi_write_reg;
>> -		nor->read = fsl_qspi_read;
>> -		nor->write = fsl_qspi_write;
>> -		nor->erase = fsl_qspi_erase;
>> -
>> -		nor->prepare = fsl_qspi_prep;
>> -		nor->unprepare = fsl_qspi_unprep;
>> -
>> -		ret = of_property_read_u32(np, "spi-max-frequency",
>> -				&q->clk_rate);
>> -		if (ret < 0)
>> -			goto mutex_failed;
>> -
>> -		/* set the chip address for READID */
>> -		fsl_qspi_set_base_addr(q, nor);
>> -
>> -		ret = spi_nor_scan(nor, NULL, &hwcaps);
>> -		if (ret)
>> -			goto mutex_failed;
>> -
>> -		ret = mtd_device_register(mtd, NULL, 0);
>> -		if (ret)
>> -			goto mutex_failed;
>> -
>> -		/* Set the correct NOR size now. */
>> -		if (q->nor_size == 0) {
>> -			q->nor_size = mtd->size;
>> -
>> -			/* Map the SPI NOR to accessiable address */
>> -			fsl_qspi_set_map_addr(q);
>> -		}
>> -
>> -		/*
>> -		 * The TX FIFO is 64 bytes in the Vybrid, but the Page Program
>> -		 * may writes 265 bytes per time. The write is working in the
>> -		 * unit of the TX FIFO, not in the unit of the SPI NOR's page
>> -		 * size.
>> -		 *
>> -		 * So shrink the spi_nor->page_size if it is larger then the
>> -		 * TX FIFO.
>> -		 */
>> -		if (nor->page_size > q->devtype_data->txfifo)
>> -			nor->page_size = q->devtype_data->txfifo;
>> -
>> -		i++;
>> -	}
>> -
>> -	/* finish the rest init. */
>> -	ret = fsl_qspi_nor_setup_last(q);
>> -	if (ret)
>> -		goto last_init_failed;
>> -
>> -	fsl_qspi_clk_disable_unprep(q);
>> -	return 0;
>> -
>> -last_init_failed:
>> -	for (i = 0; i < q->nor_num; i++) {
>> -		/* skip the holes */
>> -		if (!q->has_second_chip)
>> -			i *= 2;
>> -		mtd_device_unregister(&q->nor[i].mtd);
>> -	}
>> -mutex_failed:
>> -	mutex_destroy(&q->lock);
>> -irq_failed:
>> -	fsl_qspi_clk_disable_unprep(q);
>> -clk_failed:
>> -	dev_err(dev, "Freescale QuadSPI probe failed\n");
>> -	return ret;
>> -}
>> -
>> -static int fsl_qspi_remove(struct platform_device *pdev) -{
>> -	struct fsl_qspi *q = platform_get_drvdata(pdev);
>> -	int i;
>> -
>> -	for (i = 0; i < q->nor_num; i++) {
>> -		/* skip the holes */
>> -		if (!q->has_second_chip)
>> -			i *= 2;
>> -		mtd_device_unregister(&q->nor[i].mtd);
>> -	}
>> -
>> -	/* disable the hardware */
>> -	qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase +
>> QUADSPI_MCR);
>> -	qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER);
>> -
>> -	mutex_destroy(&q->lock);
>> -
>> -	if (q->ahb_addr)
>> -		iounmap(q->ahb_addr);
>> -
>> -	return 0;
>> -}
>> -
>> -static int fsl_qspi_suspend(struct platform_device *pdev, pm_message_t
>> state) -{
>> -	return 0;
>> -}
>> -
>> -static int fsl_qspi_resume(struct platform_device *pdev) -{
>> -	int ret;
>> -	struct fsl_qspi *q = platform_get_drvdata(pdev);
>> -
>> -	ret = fsl_qspi_clk_prep_enable(q);
>> -	if (ret)
>> -		return ret;
>> -
>> -	fsl_qspi_nor_setup(q);
>> -	fsl_qspi_set_map_addr(q);
>> -	fsl_qspi_nor_setup_last(q);
>> -
>> -	fsl_qspi_clk_disable_unprep(q);
>> -
>> -	return 0;
>> -}
>> -
>> -static struct platform_driver fsl_qspi_driver = {
>> -	.driver = {
>> -		.name	= "fsl-quadspi",
>> -		.of_match_table = fsl_qspi_dt_ids,
>> -	},
>> -	.probe          = fsl_qspi_probe,
>> -	.remove		= fsl_qspi_remove,
>> -	.suspend	= fsl_qspi_suspend,
>> -	.resume		= fsl_qspi_resume,
>> -};
>> -module_platform_driver(fsl_qspi_driver);
>> -
>> -MODULE_DESCRIPTION("Freescale QuadSPI Controller Driver"); -
>> MODULE_AUTHOR("Freescale Semiconductor Inc."); -MODULE_LICENSE("GPL
>> v2");
>> --
>> 2.7.4
> 
> Acked-by: Han Xu <han.xu@xxxxxxx>
> Tested-by: Han Xu <han.xu@xxxxxxx>

Could you also add the tags to the patch that adds the new driver?
https://patchwork.ozlabs.org/patch/1007650/

Thanks,
Frieder