The SPICC controller in Meson-AXG is capable of running at 80M clock. The ASIC IP is improved and the clock is actually running higher than previous old SoCs. Signed-off-by: Sunny Luo <sunny.luo@xxxxxxxxxxx> Signed-off-by: Yixun Lan <yixun.lan@xxxxxxxxxxx> --- drivers/spi/spi-meson-spicc.c | 37 +++++++++++++++++++++++++++++-------- 1 file changed, 29 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c index 7fe4488..b56249d 100644 --- a/drivers/spi/spi-meson-spicc.c +++ b/drivers/spi/spi-meson-spicc.c @@ -9,11 +9,13 @@ #include <linux/bitfield.h> #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/device.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/types.h> @@ -34,7 +36,6 @@ * to have a CS go down over the full transfer */ -#define SPICC_MAX_FREQ 30000000 #define SPICC_MAX_BURST 128 /* Register Map */ @@ -120,6 +121,10 @@ #define SPICC_BURST_MAX 16 #define SPICC_FIFO_HALF 10 +struct meson_spicc_data { + unsigned int max_speed_hz; +}; + struct meson_spicc_device { struct spi_master *master; struct platform_device *pdev; @@ -127,6 +132,7 @@ struct meson_spicc_device { struct clk *core; struct spi_message *message; struct spi_transfer *xfer; + const struct meson_spicc_data *data; u8 *tx_buf; u8 *rx_buf; unsigned int bytes_per_word; @@ -517,6 +523,9 @@ static int meson_spicc_probe(struct platform_device *pdev) spicc->pdev = pdev; platform_set_drvdata(pdev, spicc); + spicc->data = (const struct meson_spicc_data *) + of_device_get_match_data(&pdev->dev); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); spicc->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(spicc->base)) { @@ -567,11 +576,9 @@ static int meson_spicc_probe(struct platform_device *pdev) master->unprepare_transfer_hardware = meson_spicc_unprepare_transfer; master->transfer_one = meson_spicc_transfer_one; - /* Setup max rate according to the Meson GX datasheet */ - if ((rate >> 2) > SPICC_MAX_FREQ) - master->max_speed_hz = SPICC_MAX_FREQ; - else - master->max_speed_hz = rate >> 2; + /* Setup max rate according to the Meson datasheet */ + master->max_speed_hz = min_t(unsigned int, rate >> 1, + spicc->data->max_speed_hz); ret = devm_spi_register_master(&pdev->dev, master); if (ret) { @@ -602,9 +609,23 @@ static int meson_spicc_remove(struct platform_device *pdev) return 0; } +static const struct meson_spicc_data meson_spicc_gx_data = { + .max_speed_hz = 30000000, +}; + +static const struct meson_spicc_data meson_spicc_axg_data = { + .max_speed_hz = 80000000, +}; + static const struct of_device_id meson_spicc_of_match[] = { - { .compatible = "amlogic,meson-gx-spicc", }, - { .compatible = "amlogic,meson-axg-spicc", }, + { + .compatible = "amlogic,meson-gx-spicc", + .data = &meson_spicc_gx_data, + }, + { + .compatible = "amlogic,meson-axg-spicc", + .data = &meson_spicc_axg_data, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, meson_spicc_of_match); -- 2.7.4