[PATCH v2 2/2] dt-binding: spi: Document Renesas R-Car Gen3 RPC controller bindings

[Mason Yang <masonccyang@xxxxxxxxxxx>]

Document the bindings used by the Renesas R-Car Gen3 RPC SPI controller.

Signed-off-by: Mason Yang <masonccyang@xxxxxxxxxxx>
---
 .../devicetree/bindings/spi/spi-renesas-rpc.txt    | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
new file mode 100644
index 0000000..c6c6d9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
@@ -0,0 +1,35 @@
+Renesas R-Car Gen3 RPC controller Device Tree Bindings
+------------------------------------------------------
+
+Required properties:
+- compatible: should be "renesas,r8a77995-rpc"
+- #address-cells: should be 1
+- #size-cells: should be 0
+- reg: should contain 2 entries, one for the registers and one for the direct
+       mapping area
+- reg-names: should contain "rpc_regs" and "dirmap"
+- interrupts: interrupt line connected to the RPC SPI controller
+- clock-names: should contain "clk_rpc"
+- clocks: should contain 1 entries for the module's clock
+
+Example:
+
+	rpc: spi@ee200000 {
+		compatible = "renesas,r8a77995-rpc";
+		reg = <0 0xee200000 0 0x8100>, <0 0x08000000 0 0x4000000>;
+		reg-names = "rpc_regs", "dirmap";
+		clocks = <&cpg CPG_MOD 917>;
+		power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+		resets = <&cpg 917>;
+		clock-names = "clk_rpc";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+			spi-tx-bus-width = <1>;
+			spi-rx-bus-width = <1>;
+		};
+	};
-- 
1.9.1