This checking is already done in __spi_validate_bits_per_word(). Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx> --- drivers/spi/spi-at91-usart.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/spi/spi-at91-usart.c b/drivers/spi/spi-at91-usart.c index a924657642fa..519853f14934 100644 --- a/drivers/spi/spi-at91-usart.c +++ b/drivers/spi/spi-at91-usart.c @@ -176,12 +176,6 @@ static int at91_usart_spi_setup(struct spi_device *spi) struct at91_usart_spi *aus = spi_master_get_devdata(spi->controller); u32 *ausd = spi->controller_state; unsigned int mr = at91_usart_spi_readl(aus, MR); - u8 bits = spi->bits_per_word; - - if (bits != 8) { - dev_dbg(&spi->dev, "Only 8 bits per word are supported\n"); - return -EINVAL; - } if (spi->mode & SPI_CPOL) mr |= US_MR_CPOL; @@ -210,7 +204,7 @@ static int at91_usart_spi_setup(struct spi_device *spi) dev_dbg(&spi->dev, "setup: bpw %u mode 0x%x -> mr %d %08x\n", - bits, spi->mode, spi->chip_select, mr); + spi->bits_per_word, spi->mode, spi->chip_select, mr); return 0; } -- 2.17.1