Re: [RFC/RFT PATCH v1 9/9] mtd: spi: Skip reading the Serial Flash Discoverable Parameters

[Cyrille Pitchen <cyrille.pitchen@xxxxxxxxxx>]

Hi Lukasz,

Le 27/09/2018 à 00:07, Lukasz Majewski a écrit :
> The fsl-quadspi.c driver is not supporting SPINOR_OP_RDSFDP (0x5a)
> read opcode - in the legacy driver we do read some garbage
> data from AHB mapped area and then return on the first check

If your controller reads garbage then spi_nor_parse_sfdp() fails and exists on the
very first check: signature of the SFDP header. Hence everything should already go on
as if the SPI_NOR_SKIP_SFDP flag is set.

So this patch doesn't change anything for your controller but prevents other controller
from using QSPI protocols like SPI 1-4-4.

This patch introduces a regression for other chips.

Best regards,

Cyrille

> (L2376 @ ./mtd/spi-nor/spi-nor.c)
> 
> Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
> ---
>  drivers/mtd/spi-nor/spi-nor.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 442102be174e..c79b8c33aeeb 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -1103,7 +1103,7 @@ static const struct flash_info spi_nor_ids[] = {
>  	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, SECT_4K | SPI_NOR_QUAD_READ) },
>  	{ "n25q064a",    INFO(0x20bb17, 0, 64 * 1024,  128, SECT_4K | SPI_NOR_QUAD_READ) },
>  	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
> -	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
> +	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ | SPI_NOR_SKIP_SFDP) },
>  	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>  	{ "n25q256ax1",  INFO(0x20bb19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ) },
>  	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
>