This makes SPI work on an OPLC 1.75 that is a DT MMP2 platform.
[PATCH 0/5] Make SPI work on DT MMP2
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH 0/5] Make SPI work on DT MMP2
- From: Lubomir Rintel <lkundrak@xxxxx>
- Date: Mon, 10 Sep 2018 13:59:30 +0200
- Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, linux-pci@xxxxxxxxxxxxxxx, linux-spi@xxxxxxxxxxxxxxx, devicetree@xxxxxxxxxxxxxxx, Mark Brown <broonie@xxxxxxxxxx>, Rob Herring <robh+dt@xxxxxxxxxx>, Mark Rutland <mark.rutland@xxxxxxx>, Eric Miao <eric.y.miao@xxxxxxxxx>, Haojian Zhuang <haojian.zhuang@xxxxxxxxx>, Daniel Mack <daniel@xxxxxxxxxx>, Robert Jarzmik <robert.jarzmik@xxxxxxx>, Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
- Follow-Ups:
- [PATCH 1/5] dt-bindings: spi/spi-pxa2xx: add PXA2xx SSP SPI Controller
- From: Lubomir Rintel
- [PATCH 4/5] spi: pxa2xx: add devicetree support
- From: Lubomir Rintel
- [PATCH 5/5] DT: marvell,mmp2: add SSP1 and SSP3
- From: Lubomir Rintel
- [PATCH 3/5] spi: pxa2xx: use an enum for type
- From: Lubomir Rintel
- [PATCH 2/5] PCI: provide pci_match_id() with CONFIG_PCI=n
- From: Lubomir Rintel
- [PATCH 1/5] dt-bindings: spi/spi-pxa2xx: add PXA2xx SSP SPI Controller
- Prev by Date: Applied "spi: gpio: No MISO does not imply no RX" to the spi tree
- Next by Date: [PATCH 2/5] PCI: provide pci_match_id() with CONFIG_PCI=n
- Previous by thread: Applied "spi: gpio: No MISO does not imply no RX" to the spi tree
- Next by thread: [PATCH 2/5] PCI: provide pci_match_id() with CONFIG_PCI=n
- Index(es):
 |