[PATCH v3] spi: orion: cosmetics - alias long direct_access variables

[Kosta Zertsekel <zertsekel@xxxxxxxxx>]

This change increases the source code readability.
Instead of using `spi->child[cs].direct_access.XXX` use `dir_acc->XXX`.
Instead of using `orion_spi->child[cs].direct_access.vaddr` use `vaddr`.

Signed-off-by: Kosta Zertsekel <zertsekel@xxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
---
 drivers/spi/spi-orion.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index d01a6adc726e..184ba91abeee 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -430,6 +430,7 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
 	int word_len;
 	struct orion_spi *orion_spi;
 	int cs = spi->chip_select;
+	void __iomem *vaddr;
 
 	word_len = spi->bits_per_word;
 	count = xfer->len;
@@ -440,8 +441,9 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
 	 * Use SPI direct write mode if base address is available. Otherwise
 	 * fall back to PIO mode for this transfer.
 	 */
-	if ((orion_spi->child[cs].direct_access.vaddr) && (xfer->tx_buf) &&
-	    (word_len == 8)) {
+	vaddr = orion_spi->child[cs].direct_access.vaddr;
+
+	if (vaddr && xfer->tx_buf && word_len == 8) {
 		unsigned int cnt = count / 4;
 		unsigned int rem = count % 4;
 
@@ -449,13 +451,11 @@ orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
 		 * Send the TX-data to the SPI device via the direct
 		 * mapped address window
 		 */
-		iowrite32_rep(orion_spi->child[cs].direct_access.vaddr,
-			      xfer->tx_buf, cnt);
+		iowrite32_rep(vaddr, xfer->tx_buf, cnt);
 		if (rem) {
 			u32 *buf = (u32 *)xfer->tx_buf;
 
-			iowrite8_rep(orion_spi->child[cs].direct_access.vaddr,
-				     &buf[cnt], rem);
+			iowrite8_rep(vaddr, &buf[cnt], rem);
 		}
 
 		return count;
@@ -683,6 +683,7 @@ static int orion_spi_probe(struct platform_device *pdev)
 
 	/* Scan all SPI devices of this controller for direct mapped devices */
 	for_each_available_child_of_node(pdev->dev.of_node, np) {
+		struct orion_direct_acc *dir_acc;
 		u32 cs;
 
 		/* Get chip-select number from the "reg" property */
@@ -711,14 +712,13 @@ static int orion_spi_probe(struct platform_device *pdev)
 		 * This needs to get extended for the direct SPI-NOR / SPI-NAND
 		 * support, once this gets implemented.
 		 */
-		spi->child[cs].direct_access.vaddr = devm_ioremap(&pdev->dev,
-							    r->start,
-							    PAGE_SIZE);
-		if (!spi->child[cs].direct_access.vaddr) {
+		dir_acc = &spi->child[cs].direct_access;
+		dir_acc->vaddr = devm_ioremap(&pdev->dev, r->start, PAGE_SIZE);
+		if (!dir_acc->vaddr) {
 			status = -ENOMEM;
 			goto out_rel_axi_clk;
 		}
-		spi->child[cs].direct_access.size = PAGE_SIZE;
+		dir_acc->size = PAGE_SIZE;
 
 		dev_info(&pdev->dev, "CS%d configured for direct access\n", cs);
 	}
-- 
2.17.1