Re: [PATCH] ARM: dts: imx6q: Use correct SDMA script for SPI5 core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 22, 2018 at 07:45:09PM +0200, Sean Nyekjaer wrote:
> According to the reference manual the shp_2_mcu / mcu_2_shp
> scripts must be used for devices connected through the SPBA.
> 
> This fixes an issue we saw with DMA transfers.
> Sometimes the SPI controller RX FIFO was not empty after a DMA
> transfer and the driver got stuck in the next PIO transfer when
> it read one word more than expected.
> 
> commit dd4b487b32a35 ("ARM: dts: imx6: Use correct SDMA script
> for SPI cores") is fixing the same issue but only for SPI1 - 4.
> 
> Fixes: 677940258dd8e ("ARM: dts: imx6q: enable dma for ecspi5")
> Signed-off-by: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>

Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux