Applied "spi: Get rid of the spi_flash_read() API" to the spi tree

[Mark Brown <broonie@xxxxxxxxxx>]

The patch

   spi: Get rid of the spi_flash_read() API

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From c1f5ba70decfc2f35edcc10505e3e78fb528d212 Mon Sep 17 00:00:00 2001
From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
Date: Thu, 26 Apr 2018 18:18:20 +0200
Subject: [PATCH] spi: Get rid of the spi_flash_read() API

This API has been replaced by the spi_mem_xx() one, its only user
(spi-nor) has been converted to spi_mem_xx() and all SPI controller
drivers that were implementing the ->spi_flash_xxx() hooks are also
implementing the spi_mem ones. So we can safely get rid of this API.

Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
Reviewed-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxx>
Tested-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 drivers/spi/spi-ti-qspi.c | 41 ----------------------------
 drivers/spi/spi.c         | 57 ---------------------------------------
 include/linux/spi/spi.h   | 53 ------------------------------------
 3 files changed, 151 deletions(-)

diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 1b12c2ff8be3..c54b760e00ed 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -531,44 +531,6 @@ static void ti_qspi_setup_mmap_read(struct spi_device *spi, u8 opcode,
 		      QSPI_SPI_SETUP_REG(spi->chip_select));
 }
 
-static bool ti_qspi_spi_flash_can_dma(struct spi_device *spi,
-				      struct spi_flash_read_message *msg)
-{
-	return virt_addr_valid(msg->buf);
-}
-
-static int ti_qspi_spi_flash_read(struct spi_device *spi,
-				  struct spi_flash_read_message *msg)
-{
-	struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
-	int ret = 0;
-
-	mutex_lock(&qspi->list_lock);
-
-	if (!qspi->mmap_enabled)
-		ti_qspi_enable_memory_map(spi);
-	ti_qspi_setup_mmap_read(spi, msg->read_opcode, msg->data_nbits,
-				msg->addr_width, msg->dummy_bytes);
-
-	if (qspi->rx_chan) {
-		if (msg->cur_msg_mapped)
-			ret = ti_qspi_dma_xfer_sg(qspi, msg->rx_sg, msg->from);
-		else
-			ret = ti_qspi_dma_bounce_buffer(qspi, msg->from,
-							msg->buf, msg->len);
-		if (ret)
-			goto err_unlock;
-	} else {
-		memcpy_fromio(msg->buf, qspi->mmap_base + msg->from, msg->len);
-	}
-	msg->retlen = msg->len;
-
-err_unlock:
-	mutex_unlock(&qspi->list_lock);
-
-	return ret;
-}
-
 static int ti_qspi_exec_mem_op(struct spi_mem *mem,
 			       const struct spi_mem_op *op)
 {
@@ -727,7 +689,6 @@ static int ti_qspi_probe(struct platform_device *pdev)
 	master->dev.of_node = pdev->dev.of_node;
 	master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
 				     SPI_BPW_MASK(8);
-	master->spi_flash_read = ti_qspi_spi_flash_read;
 	master->mem_ops = &ti_qspi_mem_ops;
 
 	if (!of_property_read_u32(np, "num-cs", &num_cs))
@@ -827,7 +788,6 @@ static int ti_qspi_probe(struct platform_device *pdev)
 		dma_release_channel(qspi->rx_chan);
 		goto no_dma;
 	}
-	master->spi_flash_can_dma = ti_qspi_spi_flash_can_dma;
 	master->dma_rx = qspi->rx_chan;
 	init_completion(&qspi->transfer_complete);
 	if (res_mmap)
@@ -841,7 +801,6 @@ static int ti_qspi_probe(struct platform_device *pdev)
 				 "mmap failed with error %ld using PIO mode\n",
 				 PTR_ERR(qspi->mmap_base));
 			qspi->mmap_base = NULL;
-			master->spi_flash_read = NULL;
 			master->mem_ops = NULL;
 		}
 	}
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index c85b0cf7b4a9..8ee1ba13eb23 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -3055,63 +3055,6 @@ int spi_async_locked(struct spi_device *spi, struct spi_message *message)
 }
 EXPORT_SYMBOL_GPL(spi_async_locked);
 
-
-int spi_flash_read(struct spi_device *spi,
-		   struct spi_flash_read_message *msg)
-
-{
-	struct spi_controller *master = spi->controller;
-	struct device *rx_dev = NULL;
-	int ret;
-
-	if ((msg->opcode_nbits == SPI_NBITS_DUAL ||
-	     msg->addr_nbits == SPI_NBITS_DUAL) &&
-	    !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
-		return -EINVAL;
-	if ((msg->opcode_nbits == SPI_NBITS_QUAD ||
-	     msg->addr_nbits == SPI_NBITS_QUAD) &&
-	    !(spi->mode & SPI_TX_QUAD))
-		return -EINVAL;
-	if (msg->data_nbits == SPI_NBITS_DUAL &&
-	    !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
-		return -EINVAL;
-	if (msg->data_nbits == SPI_NBITS_QUAD &&
-	    !(spi->mode &  SPI_RX_QUAD))
-		return -EINVAL;
-
-	if (master->auto_runtime_pm) {
-		ret = pm_runtime_get_sync(master->dev.parent);
-		if (ret < 0) {
-			dev_err(&master->dev, "Failed to power device: %d\n",
-				ret);
-			return ret;
-		}
-	}
-
-	mutex_lock(&master->bus_lock_mutex);
-	mutex_lock(&master->io_mutex);
-	if (master->dma_rx && master->spi_flash_can_dma(spi, msg)) {
-		rx_dev = master->dma_rx->device->dev;
-		ret = spi_map_buf(master, rx_dev, &msg->rx_sg,
-				  msg->buf, msg->len,
-				  DMA_FROM_DEVICE);
-		if (!ret)
-			msg->cur_msg_mapped = true;
-	}
-	ret = master->spi_flash_read(spi, msg);
-	if (msg->cur_msg_mapped)
-		spi_unmap_buf(master, rx_dev, &msg->rx_sg,
-			      DMA_FROM_DEVICE);
-	mutex_unlock(&master->io_mutex);
-	mutex_unlock(&master->bus_lock_mutex);
-
-	if (master->auto_runtime_pm)
-		pm_runtime_put(master->dev.parent);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(spi_flash_read);
-
 /*-------------------------------------------------------------------------*/
 
 /* Utility methods for SPI protocol drivers, layered on
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index a7e0bbed738c..a64235e05321 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -26,7 +26,6 @@ struct dma_chan;
 struct property_entry;
 struct spi_controller;
 struct spi_transfer;
-struct spi_flash_read_message;
 struct spi_controller_mem_ops;
 
 /*
@@ -382,11 +381,6 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  *	     controller has native support for memory like operations.
  * @unprepare_message: undo any work done by prepare_message().
  * @slave_abort: abort the ongoing transfer request on an SPI slave controller
- * @spi_flash_read: to support spi-controller hardwares that provide
- *                  accelerated interface to read from flash devices.
- * @spi_flash_can_dma: analogous to can_dma() interface, but for
- *		       controllers implementing spi_flash_read.
- * @flash_read_supported: spi device supports flash read
  * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
  *	number. Any individual value may be -ENOENT for CS lines that
  *	are not GPIOs (driven by the SPI controller itself).
@@ -552,11 +546,6 @@ struct spi_controller {
 	int (*unprepare_message)(struct spi_controller *ctlr,
 				 struct spi_message *message);
 	int (*slave_abort)(struct spi_controller *ctlr);
-	int (*spi_flash_read)(struct  spi_device *spi,
-			      struct spi_flash_read_message *msg);
-	bool (*spi_flash_can_dma)(struct spi_device *spi,
-				  struct spi_flash_read_message *msg);
-	bool (*flash_read_supported)(struct spi_device *spi);
 
 	/*
 	 * These hooks are for drivers that use a generic implementation
@@ -1190,48 +1179,6 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
 	return be16_to_cpu(result);
 }
 
-/**
- * struct spi_flash_read_message - flash specific information for
- * spi-masters that provide accelerated flash read interfaces
- * @buf: buffer to read data
- * @from: offset within the flash from where data is to be read
- * @len: length of data to be read
- * @retlen: actual length of data read
- * @read_opcode: read_opcode to be used to communicate with flash
- * @addr_width: number of address bytes
- * @dummy_bytes: number of dummy bytes
- * @opcode_nbits: number of lines to send opcode
- * @addr_nbits: number of lines to send address
- * @data_nbits: number of lines for data
- * @rx_sg: Scatterlist for receive data read from flash
- * @cur_msg_mapped: message has been mapped for DMA
- */
-struct spi_flash_read_message {
-	void *buf;
-	loff_t from;
-	size_t len;
-	size_t retlen;
-	u8 read_opcode;
-	u8 addr_width;
-	u8 dummy_bytes;
-	u8 opcode_nbits;
-	u8 addr_nbits;
-	u8 data_nbits;
-	struct sg_table rx_sg;
-	bool cur_msg_mapped;
-};
-
-/* SPI core interface for flash read support */
-static inline bool spi_flash_read_supported(struct spi_device *spi)
-{
-	return spi->controller->spi_flash_read &&
-	       (!spi->controller->flash_read_supported ||
-	       spi->controller->flash_read_supported(spi));
-}
-
-int spi_flash_read(struct spi_device *spi,
-		   struct spi_flash_read_message *msg);
-
 /*---------------------------------------------------------------------------*/
 
 /*
-- 
2.17.0

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html