[PATCH] spi: cadence: Add usleep_range() for cdns_spi_fill_tx_fifo()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In case of xspi work in busy condition, may send bytes failed.
once something wrong, spi controller did't work any more

My test found this situation appear in both of read/write process.
so when TX FIFO is full, add one byte delay before send data;

Signed-off-by: sxauwsk <sxauwsk@xxxxxxx>
---
 drivers/spi/spi-cadence.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
index 5c9516a..4a00163 100644
--- a/drivers/spi/spi-cadence.c
+++ b/drivers/spi/spi-cadence.c
@@ -313,6 +313,14 @@ static void cdns_spi_fill_tx_fifo(struct cdns_spi *xspi)

 	while ((trans_cnt < CDNS_SPI_FIFO_DEPTH) &&
 	       (xspi->tx_bytes > 0)) {
+
+		/* When xspi in busy condition, bytes may send failed,
+		 * then spi control did't work thoroughly, add one byte delay
+		 */
+		if (cdns_spi_read(xspi, CDNS_SPI_ISR) &
+		    CDNS_SPI_IXR_TXFULL)
+			usleep_range(10, 20);
+
 		if (xspi->txbuf)
 			cdns_spi_write(xspi, CDNS_SPI_TXD, *xspi->txbuf++);
 		else
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux