DMA transfers are now available for sun6i and sun8i SoCs. The DMA mode is used automatically as soon as requested transfer length is more than FIFO length. Signed-off-by: Sergey Suloev <ssuloev@xxxxxxxxxxxxx> --- drivers/spi/spi-sun6i.c | 296 ++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 275 insertions(+), 21 deletions(-) diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index a6e6812..e74fa3d 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -14,6 +14,8 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/device.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h> @@ -55,11 +57,14 @@ #define SUN6I_FIFO_CTL_REG 0x18 #define SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_MASK 0xff -#define SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_BITS 0 +#define SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_POS 0 +#define SUN6I_FIFO_CTL_RF_DRQ_EN BIT(8) #define SUN6I_FIFO_CTL_RF_RST BIT(15) #define SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_MASK 0xff -#define SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_BITS 16 +#define SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_POS 16 +#define SUN6I_FIFO_CTL_TF_DRQ_EN BIT(24) #define SUN6I_FIFO_CTL_TF_RST BIT(31) +#define SUN6I_FIFO_CTL_DMA_DEDICATE BIT(9)|BIT(25) #define SUN6I_FIFO_STA_REG 0x1c #define SUN6I_FIFO_STA_RF_CNT_MASK 0x7f @@ -177,6 +182,15 @@ static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi, int len) } } +static bool sun6i_spi_can_dma(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *tfr) +{ + struct sun6i_spi *sspi = spi_master_get_devdata(master); + + return tfr->len > sspi->fifo_depth; +} + static void sun6i_spi_set_cs(struct spi_device *spi, bool enable) { struct sun6i_spi *sspi = spi_master_get_devdata(spi->master); @@ -208,6 +222,9 @@ static size_t sun6i_spi_max_transfer_size(struct spi_device *spi) struct spi_master *master = spi->master; struct sun6i_spi *sspi = spi_master_get_devdata(master); + if (master->can_dma) + return SUN6I_MAX_XFER_SIZE; + return sspi->fifo_depth; } @@ -277,15 +294,174 @@ static int sun6i_spi_wait_for_transfer(struct spi_device *spi, return 0; } +static void sun6i_spi_dma_callback(void *param) +{ + struct spi_master *master = param; + + dev_dbg(&master->dev, "DMA transfer complete\n"); + spi_finalize_current_transfer(master); +} + +static int sun6i_spi_dmap_prep_tx(struct spi_master *master, + struct spi_transfer *tfr, + dma_cookie_t *cookie) +{ + struct dma_async_tx_descriptor *chan_desc = NULL; + + chan_desc = dmaengine_prep_slave_sg(master->dma_tx, + tfr->tx_sg.sgl, tfr->tx_sg.nents, + DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!chan_desc) { + dev_err(&master->dev, + "Couldn't prepare TX DMA slave\n"); + return -EIO; + } + + chan_desc->callback = sun6i_spi_dma_callback; + chan_desc->callback_param = master; + + *cookie = dmaengine_submit(chan_desc); + dma_async_issue_pending(master->dma_tx); + + return 0; +} + +static int sun6i_spi_dmap_prep_rx(struct spi_master *master, + struct spi_transfer *tfr, + dma_cookie_t *cookie) +{ + struct dma_async_tx_descriptor *chan_desc = NULL; + + chan_desc = dmaengine_prep_slave_sg(master->dma_rx, + tfr->rx_sg.sgl, tfr->rx_sg.nents, + DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!chan_desc) { + dev_err(&master->dev, + "Couldn't prepare RX DMA slave\n"); + return -EIO; + } + + chan_desc->callback = sun6i_spi_dma_callback; + chan_desc->callback_param = master; + + *cookie = dmaengine_submit(chan_desc); + dma_async_issue_pending(master->dma_rx); + + return 0; +} + +static int sun6i_spi_transfer_one_dma(struct spi_device *spi, + struct spi_transfer *tfr) +{ + struct spi_master *master = spi->master; + struct sun6i_spi *sspi = spi_master_get_devdata(master); + dma_cookie_t tx_cookie = 0,rx_cookie = 0; + enum dma_status status; + int ret; + u32 reg, trig_level = 0; + + dev_dbg(&master->dev, "Using DMA mode for transfer\n"); + + reg = sun6i_spi_read(sspi, SUN6I_FIFO_CTL_REG); + + if (sspi->tx_buf) { + ret = sun6i_spi_dmap_prep_tx(master, tfr, &tx_cookie); + if (ret) + goto out; + + reg |= SUN6I_FIFO_CTL_TF_DRQ_EN; + + trig_level = sspi->fifo_depth; + reg &= ~SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_MASK; + reg |= (trig_level << SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_POS); + } + + if (sspi->rx_buf) { + ret = sun6i_spi_dmap_prep_rx(master, tfr, &rx_cookie); + if (ret) + goto out; + + reg |= SUN6I_FIFO_CTL_RF_DRQ_EN; + + trig_level = 1; + reg &= ~SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_MASK; + reg |= (trig_level << SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_POS); + } + + /* Enable Dedicated DMA requests */ + sun6i_spi_write(sspi, SUN6I_FIFO_CTL_REG, + reg | SUN6I_FIFO_CTL_DMA_DEDICATE); + + /* Start transfer */ + sun6i_spi_set(sspi, SUN6I_TFR_CTL_REG, SUN6I_TFR_CTL_XCH); + + ret = sun6i_spi_wait_for_transfer(spi, tfr); + if (ret) + goto out; + + if (sspi->tx_buf && (status = dma_async_is_tx_complete(master->dma_tx, + tx_cookie, NULL, NULL))) { + dev_warn(&master->dev, + "DMA returned completion status of: %s\n", + status == DMA_ERROR ? "error" : "in progress"); + } + if (sspi->rx_buf && (status = dma_async_is_tx_complete(master->dma_rx, + rx_cookie, NULL, NULL))) { + dev_warn(&master->dev, + "DMA returned completion status of: %s\n", + status == DMA_ERROR ? "error" : "in progress"); + } + +out: + if (ret) { + dev_dbg(&master->dev, "DMA channel teardown\n"); + if (sspi->tx_buf) + dmaengine_terminate_sync(master->dma_tx); + if (sspi->rx_buf) + dmaengine_terminate_sync(master->dma_rx); + } + + sun6i_spi_drain_fifo(sspi, sspi->fifo_depth); + + sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0); + + return ret; +} + +static int sun6i_spi_transfer_one_pio(struct spi_device *spi, + struct spi_transfer *tfr) +{ + struct spi_master *master = spi->master; + struct sun6i_spi *sspi = spi_master_get_devdata(master); + int ret; + + /* Disable DMA requests */ + sun6i_spi_write(sspi, SUN6I_FIFO_CTL_REG, 0); + + sun6i_spi_fill_fifo(sspi, sspi->fifo_depth); + + /* Enable transfer complete IRQ */ + sun6i_spi_set(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC); + + /* Start transfer */ + sun6i_spi_set(sspi, SUN6I_TFR_CTL_REG, SUN6I_TFR_CTL_XCH); + + ret = sun6i_spi_wait_for_transfer(spi, tfr); + + sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0); + + return ret; +} + static int sun6i_spi_transfer_one(struct spi_master *master, struct spi_device *spi, struct spi_transfer *tfr) { struct sun6i_spi *sspi = spi_master_get_devdata(master); - unsigned int mclk_rate, div, timeout; - unsigned int start, end, tx_time; + unsigned int mclk_rate, div; unsigned int tx_len = 0; - int ret = 0; u32 reg; /* A zero length transfer never finishes if programmed @@ -293,10 +469,15 @@ static int sun6i_spi_transfer_one(struct spi_master *master, if (!tfr->len) return 0; - /* Don't support transfer larger than the FIFO */ - if (tfr->len > sspi->fifo_depth) + if (tfr->len > SUN6I_MAX_XFER_SIZE) return -EMSGSIZE; + if (!master->can_dma) { + /* Don't support transfer larger than the FIFO */ + if (tfr->len > sspi->fifo_depth) + return -EMSGSIZE; + } + sspi->tx_buf = tfr->tx_buf; sspi->rx_buf = tfr->rx_buf; sspi->len = tfr->len; @@ -353,21 +534,10 @@ static int sun6i_spi_transfer_one(struct spi_master *master, sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG, SUN6I_BURST_CTL_CNT_STC(tx_len)); - /* Fill the TX FIFO */ - sun6i_spi_fill_fifo(sspi, sspi->fifo_depth); - - /* Enable transfer complete interrupt */ - sun6i_spi_set(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC); - - /* Start the transfer */ - sun6i_spi_set(sspi, SUN6I_TFR_CTL_REG, SUN6I_TFR_CTL_XCH); - - /* Wait for completion */ - ret = sun6i_spi_wait_for_transfer(spi, tfr); - - sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0); + if (sun6i_spi_can_dma(master, spi, tfr)) + return sun6i_spi_transfer_one_dma(spi, tfr); - return ret; + return sun6i_spi_transfer_one_pio(spi, tfr); } static irqreturn_t sun6i_spi_handler(int irq, void *dev_id) @@ -389,6 +559,76 @@ static irqreturn_t sun6i_spi_handler(int irq, void *dev_id) return IRQ_NONE; } +static int sun6i_spi_dma_setup(struct platform_device *pdev, + struct resource *res) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct dma_slave_config dma_sconf; + int ret; + + master->dma_tx = dma_request_slave_channel_reason(&pdev->dev, "tx"); + if (IS_ERR(master->dma_tx)) { + dev_err(&pdev->dev, "Unable to acquire DMA TX channel\n"); + ret = PTR_ERR(master->dma_tx); + goto out; + } + + dma_sconf.direction = DMA_MEM_TO_DEV; + dma_sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_sconf.dst_addr = res->start + SUN6I_TXDATA_REG; + dma_sconf.src_maxburst = 1; + dma_sconf.dst_maxburst = 1; + + ret = dmaengine_slave_config(master->dma_tx, &dma_sconf); + if (ret) { + dev_err(&pdev->dev, "Unable to configure DMA TX slave\n"); + goto err_rel_tx; + } + + master->dma_rx = dma_request_slave_channel_reason(&pdev->dev, "rx"); + if (IS_ERR(master->dma_rx)) { + dev_err(&pdev->dev, "Unable to acquire DMA RX channel\n"); + ret = PTR_ERR(master->dma_rx); + goto err_rel_tx; + } + + dma_sconf.direction = DMA_DEV_TO_MEM; + dma_sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_sconf.src_addr = res->start + SUN6I_RXDATA_REG; + dma_sconf.src_maxburst = 1; + dma_sconf.dst_maxburst = 1; + + ret = dmaengine_slave_config(master->dma_rx, &dma_sconf); + if (ret) { + dev_err(&pdev->dev, "Unable to configure DMA RX slave\n"); + goto err_rel_rx; + } + + /* don't set can_dma unless both channels are valid*/ + master->can_dma = sun6i_spi_can_dma; + + return 0; + +err_rel_rx: + dma_release_channel(master->dma_rx); +err_rel_tx: + dma_release_channel(master->dma_tx); +out: + master->dma_tx = NULL; + master->dma_rx = NULL; + return ret; +} + +static void sun6i_spi_dma_release(struct spi_master *master) +{ + if (master->can_dma) { + dma_release_channel(master->dma_rx); + dma_release_channel(master->dma_tx); + } +} + static int sun6i_spi_runtime_resume(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); @@ -510,6 +750,15 @@ static int sun6i_spi_probe(struct platform_device *pdev) goto err_free_master; } + ret = sun6i_spi_dma_setup(pdev, res); + if (ret) { + if (ret == -EPROBE_DEFER) { + /* wait for the dma driver to load */ + goto err_free_master; + } + dev_warn(&pdev->dev, "DMA transfer not supported\n"); + } + /* * This wake-up/shutdown pattern is to be able to have the * device woken up, even if runtime_pm is disabled @@ -536,14 +785,19 @@ err_pm_disable: pm_runtime_disable(&pdev->dev); sun6i_spi_runtime_suspend(&pdev->dev); err_free_master: + sun6i_spi_dma_release(master); spi_master_put(master); return ret; } static int sun6i_spi_remove(struct platform_device *pdev) { + struct spi_master *master = platform_get_drvdata(pdev); + pm_runtime_force_suspend(&pdev->dev); + sun6i_spi_dma_release(master); + return 0; } -- 2.16.2 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html