[PATCHv2 0/3] spi: support for Socionext Synquacer platform

[jassisinghbrar@xxxxxxxxx]

From: Jassi Brar <jaswinder.singh@xxxxxxxxxx>

Hello,

 Support for Socionext's FIP controller intended for flash device interfacing.
The controller can operate in 'direct' or 'command' mode. One mode directly
talks and provide a read/write i/f to the flash device. Other works as plain
SPI mode. This driver runs the controller as a SPI controller.

Changes since v1:
	# Changed licence header to C++ style comment.
	# Removed redundant lock and transfer_mode backup member.
	# Fixed divisor to allow upto 254.

Jassi Brar (3):
  dt-bindings: spi: Add DT bindings for Synquacer
  spi: Add spi driver for Socionext Synquacer platform
  MAINTAINERS: Add entry for Synquacer SPI driver

 .../devicetree/bindings/spi/spi-synquacer.txt      |  24 +
 MAINTAINERS                                        |   7 +
 drivers/spi/Kconfig                                |  11 +
 drivers/spi/Makefile                               |   1 +
 drivers/spi/spi-synquacer.c                        | 649 +++++++++++++++++++++
 5 files changed, 682 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-synquacer.txt
 create mode 100644 drivers/spi/spi-synquacer.c

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html