Re: [PATCH v10 03/16] spi: spi-falcon: drop check of boot select

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Aug 20, 2017 at 12:18:10AM +0200, Hauke Mehrtens wrote:

> Do not check which flash type the SoC was booted from before
> using this driver. Assume that the device tree is correct and use this
> driver when it was added to device tree. This also removes a build
> dependency to the SoC code.
> 
> All device trees I am aware of only have one correct flash device entry
> in it. The device tree is anyway bundled with the kernel in all systems
> using device tree I know of.
> 
> The boot mode can be specified with some pin straps and will select the
> flash type the rom code will boot from. One SPI, NOR or NAND flash chip
> can be connect to the EBU and used to load the first stage boot loader
> from.

I think other than this patch we finally have all the acks necessary so
I merged the series except this patch which shouldn't be strictly necessary.

  Ralf
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux