The patch spi: spi-ep93xx: use 32-bit read/write for all registers has been applied to the spi tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 8447e4781f033f56cb18c2ec0301ea5d207877fc Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Date: Wed, 9 Aug 2017 08:51:26 +1200 Subject: [PATCH] spi: spi-ep93xx: use 32-bit read/write for all registers All the EP93xx SSP registers are 32-bit. Since most of the upper bits are unused, this driver tries to be tricky and uses 8 or 16-bit I/O to access the registers. This really just adds a bit of confusion. Simplify the I/O by using 32-bit read/write's for all of the registers. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> [chris: use u32 instead of unsigned int] Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/spi/spi-ep93xx.c | 83 ++++++++++++++++++++++-------------------------- 1 file changed, 38 insertions(+), 45 deletions(-) diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index 49c42a6c2be1..0bd792020471 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -113,47 +113,47 @@ struct ep93xx_spi { static int ep93xx_spi_enable(const struct ep93xx_spi *espi) { - u8 regval; + u32 val; int err; err = clk_enable(espi->clk); if (err) return err; - regval = readb(espi->mmio + SSPCR1); - regval |= SSPCR1_SSE; - writeb(regval, espi->mmio + SSPCR1); + val = readl(espi->mmio + SSPCR1); + val |= SSPCR1_SSE; + writel(val, espi->mmio + SSPCR1); return 0; } static void ep93xx_spi_disable(const struct ep93xx_spi *espi) { - u8 regval; + u32 val; - regval = readb(espi->mmio + SSPCR1); - regval &= ~SSPCR1_SSE; - writeb(regval, espi->mmio + SSPCR1); + val = readl(espi->mmio + SSPCR1); + val &= ~SSPCR1_SSE; + writel(val, espi->mmio + SSPCR1); clk_disable(espi->clk); } static void ep93xx_spi_enable_interrupts(const struct ep93xx_spi *espi) { - u8 regval; + u32 val; - regval = readb(espi->mmio + SSPCR1); - regval |= (SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE); - writeb(regval, espi->mmio + SSPCR1); + val = readl(espi->mmio + SSPCR1); + val |= (SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE); + writel(val, espi->mmio + SSPCR1); } static void ep93xx_spi_disable_interrupts(const struct ep93xx_spi *espi) { - u8 regval; + u32 val; - regval = readb(espi->mmio + SSPCR1); - regval &= ~(SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE); - writeb(regval, espi->mmio + SSPCR1); + val = readl(espi->mmio + SSPCR1); + val &= ~(SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE); + writel(val, espi->mmio + SSPCR1); } /** @@ -230,47 +230,41 @@ static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi, spi->mode, div_cpsr, div_scr, dss); dev_dbg(&espi->pdev->dev, "setup: cr0 %#x\n", cr0); - writeb(div_cpsr, espi->mmio + SSPCPSR); - writew(cr0, espi->mmio + SSPCR0); + writel(div_cpsr, espi->mmio + SSPCPSR); + writel(cr0, espi->mmio + SSPCR0); return 0; } static void ep93xx_do_write(struct ep93xx_spi *espi, struct spi_transfer *t) { - if (t->bits_per_word > 8) { - u16 tx_val = 0; + u32 val = 0; + if (t->bits_per_word > 8) { if (t->tx_buf) - tx_val = ((u16 *)t->tx_buf)[espi->tx]; - writew(tx_val, espi->mmio + SSPDR); - espi->tx += sizeof(tx_val); + val = ((u16 *)t->tx_buf)[espi->tx]; + espi->tx += 2; } else { - u8 tx_val = 0; - if (t->tx_buf) - tx_val = ((u8 *)t->tx_buf)[espi->tx]; - writeb(tx_val, espi->mmio + SSPDR); - espi->tx += sizeof(tx_val); + val = ((u8 *)t->tx_buf)[espi->tx]; + espi->tx += 1; } + writel(val, espi->mmio + SSPDR); } static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t) { - if (t->bits_per_word > 8) { - u16 rx_val; + u32 val; - rx_val = readw(espi->mmio + SSPDR); + val = readl(espi->mmio + SSPDR); + if (t->bits_per_word > 8) { if (t->rx_buf) - ((u16 *)t->rx_buf)[espi->rx] = rx_val; - espi->rx += sizeof(rx_val); + ((u16 *)t->rx_buf)[espi->rx] = val; + espi->rx += 2; } else { - u8 rx_val; - - rx_val = readb(espi->mmio + SSPDR); if (t->rx_buf) - ((u8 *)t->rx_buf)[espi->rx] = rx_val; - espi->rx += sizeof(rx_val); + ((u8 *)t->rx_buf)[espi->rx] = val; + espi->rx += 1; } } @@ -291,7 +285,7 @@ static int ep93xx_spi_read_write(struct ep93xx_spi *espi) struct spi_transfer *t = msg->state; /* read as long as RX FIFO has frames in it */ - while ((readb(espi->mmio + SSPSR) & SSPSR_RNE)) { + while ((readl(espi->mmio + SSPSR) & SSPSR_RNE)) { ep93xx_do_read(espi, t); espi->fifo_level--; } @@ -593,14 +587,14 @@ static void ep93xx_spi_process_message(struct ep93xx_spi *espi, * Just to be sure: flush any data from RX FIFO. */ timeout = jiffies + msecs_to_jiffies(SPI_TIMEOUT); - while (readw(espi->mmio + SSPSR) & SSPSR_RNE) { + while (readl(espi->mmio + SSPSR) & SSPSR_RNE) { if (time_after(jiffies, timeout)) { dev_warn(&espi->pdev->dev, "timeout while flushing RX FIFO\n"); msg->status = -ETIMEDOUT; return; } - readw(espi->mmio + SSPDR); + readl(espi->mmio + SSPDR); } /* @@ -649,15 +643,14 @@ static int ep93xx_spi_transfer_one_message(struct spi_master *master, static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id) { struct ep93xx_spi *espi = dev_id; - u8 irq_status = readb(espi->mmio + SSPIIR); /* * If we got ROR (receive overrun) interrupt we know that something is * wrong. Just abort the message. */ - if (unlikely(irq_status & SSPIIR_RORIS)) { + if (readl(espi->mmio + SSPIIR) & SSPIIR_RORIS) { /* clear the overrun interrupt */ - writeb(0, espi->mmio + SSPICR); + writel(0, espi->mmio + SSPICR); dev_warn(&espi->pdev->dev, "receive overrun, aborting the message\n"); espi->current_msg->status = -EIO; @@ -857,7 +850,7 @@ static int ep93xx_spi_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "DMA setup failed. Falling back to PIO\n"); /* make sure that the hardware is disabled */ - writeb(0, espi->mmio + SSPCR1); + writel(0, espi->mmio + SSPCR1); error = devm_spi_register_master(&pdev->dev, master); if (error) { -- 2.13.3 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html