Re: [PATCH v7 08/16] MIPS: lantiq: Convert the fpi bus driver to a platform_driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 3, 2017 at 1:40 AM, Hauke Mehrtens <hauke@xxxxxxxxxx> wrote:
> Instead of hacking the configuration of the FPI bus into the arch code
> add an own bus driver for this internal bus. The FPI bus is the main
> bus of the SoC. This bus driver makes sure the bus is configured
> correctly before the child drivers are getting initialized. This driver
> will probably also be used on different SoC later.
>

Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

> Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/mips/lantiq/fpi-bus.txt    | 31 ++++++++
>  MAINTAINERS                                        |  1 +
>  arch/mips/lantiq/xway/reset.c                      |  4 -
>  arch/mips/lantiq/xway/sysctrl.c                    | 41 ----------
>  drivers/soc/Makefile                               |  1 +
>  drivers/soc/lantiq/Makefile                        |  1 +
>  drivers/soc/lantiq/fpi-bus.c                       | 87 ++++++++++++++++++++++
>  7 files changed, 121 insertions(+), 45 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mips/lantiq/fpi-bus.txt
>  create mode 100644 drivers/soc/lantiq/Makefile
>  create mode 100644 drivers/soc/lantiq/fpi-bus.c
>
> diff --git a/Documentation/devicetree/bindings/mips/lantiq/fpi-bus.txt b/Documentation/devicetree/bindings/mips/lantiq/fpi-bus.txt
> new file mode 100644
> index 000000000000..0a2df4338332
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/lantiq/fpi-bus.txt
> @@ -0,0 +1,31 @@
> +Lantiq XWAY SoC FPI BUS binding
> +============================
> +
> +
> +-------------------------------------------------------------------------------
> +Required properties:
> +- compatible                   : Should be one of
> +                                       "lantiq,xrx200-fpi"
> +- reg                          : The address and length of the XBAR
> +                                 configuration register.
> +                                 Address and length of the FPI bus itself.
> +- lantiq,rcu                   : A phandle to the RCU syscon
> +- lantiq,offset-endianness     : Offset of the endianness configuration
> +                                 register
> +
> +-------------------------------------------------------------------------------
> +Example for the FPI on the xrx200 SoCs:
> +       fpi@10000000 {
> +               compatible = "lantiq,xrx200-fpi";
> +               ranges = <0x0 0x10000000 0xf000000>;
> +               reg =   <0x1f400000 0x1000>,
> +                       <0x10000000 0xf000000>;
> +               lantiq,rcu = <&rcu0>;
> +               lantiq,offset-endianness = <0x4c>;
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +
> +               gptu@e100a00 {
> +                       ......
> +               };
> +       };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 09b5ab6a8a5c..5a85d67d8d8a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7440,6 +7440,7 @@ M:        John Crispin <john@xxxxxxxxxxx>
>  L:     linux-mips@xxxxxxxxxxxxxx
>  S:     Maintained
>  F:     arch/mips/lantiq
> +F:     drivers/soc/lantiq
>
>  LAPB module
>  L:     linux-x25@xxxxxxxxxxxxxxx
> diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
> index 83fd65d76e81..b6752c95a600 100644
> --- a/arch/mips/lantiq/xway/reset.c
> +++ b/arch/mips/lantiq/xway/reset.c
> @@ -373,10 +373,6 @@ static int __init mips_reboot_setup(void)
>             of_machine_is_compatible("lantiq,vr9"))
>                 ltq_usb_init();
>
> -       if (of_machine_is_compatible("lantiq,vr9"))
> -               ltq_rcu_w32(ltq_rcu_r32(RCU_AHB_ENDIAN) | RCU_VR9_BE_AHB1S,
> -                           RCU_AHB_ENDIAN);
> -
>         _machine_restart = ltq_machine_restart;
>         _machine_halt = ltq_machine_halt;
>         pm_power_off = ltq_machine_power_off;
> diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
> index 95bec460b651..706639a343bc 100644
> --- a/arch/mips/lantiq/xway/sysctrl.c
> +++ b/arch/mips/lantiq/xway/sysctrl.c
> @@ -145,15 +145,7 @@ static u32 pmu_clk_cr_b[] = {
>  #define pmu_w32(x, y)  ltq_w32((x), pmu_membase + (y))
>  #define pmu_r32(x)     ltq_r32(pmu_membase + (x))
>
> -#define XBAR_ALWAYS_LAST       0x430
> -#define XBAR_FPI_BURST_EN      BIT(1)
> -#define XBAR_AHB_BURST_EN      BIT(2)
> -
> -#define xbar_w32(x, y) ltq_w32((x), ltq_xbar_membase + (y))
> -#define xbar_r32(x)    ltq_r32(ltq_xbar_membase + (x))
> -
>  static void __iomem *pmu_membase;
> -static void __iomem *ltq_xbar_membase;
>  void __iomem *ltq_cgu_membase;
>  void __iomem *ltq_ebu_membase;
>
> @@ -293,16 +285,6 @@ static void pci_ext_disable(struct clk *clk)
>         ltq_cgu_w32((1 << 31) | (1 << 30), pcicr);
>  }
>
> -static void xbar_fpi_burst_disable(void)
> -{
> -       u32 reg;
> -
> -       /* bit 1 as 1 --burst; bit 1 as 0 -- single */
> -       reg = xbar_r32(XBAR_ALWAYS_LAST);
> -       reg &= ~XBAR_FPI_BURST_EN;
> -       xbar_w32(reg, XBAR_ALWAYS_LAST);
> -}
> -
>  /* enable a clockout source */
>  static int clkout_enable(struct clk *clk)
>  {
> @@ -459,26 +441,6 @@ void __init ltq_soc_init(void)
>         if (!pmu_membase || !ltq_cgu_membase || !ltq_ebu_membase)
>                 panic("Failed to remap core resources");
>
> -       if (of_machine_is_compatible("lantiq,vr9")) {
> -               struct resource res_xbar;
> -               struct device_node *np_xbar =
> -                               of_find_compatible_node(NULL, NULL,
> -                                                       "lantiq,xbar-xway");
> -
> -               if (!np_xbar)
> -                       panic("Failed to load xbar nodes from devicetree");
> -               if (of_address_to_resource(np_xbar, 0, &res_xbar))
> -                       panic("Failed to get xbar resources");
> -               if (!request_mem_region(res_xbar.start, resource_size(&res_xbar),
> -                       res_xbar.name))
> -                       panic("Failed to get xbar resources");
> -
> -               ltq_xbar_membase = ioremap_nocache(res_xbar.start,
> -                                                  resource_size(&res_xbar));
> -               if (!ltq_xbar_membase)
> -                       panic("Failed to remap xbar resources");
> -       }
> -
>         /* make sure to unprotect the memory region where flash is located */
>         ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
>
> @@ -605,7 +567,4 @@ void __init ltq_soc_init(void)
>                 clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
>                 clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
>         }
> -
> -       if (of_machine_is_compatible("lantiq,vr9"))
> -               xbar_fpi_burst_disable();
>  }
> diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
> index 824b44281efa..009b5de74a24 100644
> --- a/drivers/soc/Makefile
> +++ b/drivers/soc/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_ARCH_DOVE)         += dove/
>  obj-$(CONFIG_MACH_DOVE)                += dove/
>  obj-y                          += fsl/
>  obj-$(CONFIG_ARCH_MXC)         += imx/
> +obj-$(CONFIG_SOC_XWAY)         += lantiq/
>  obj-$(CONFIG_ARCH_MEDIATEK)    += mediatek/
>  obj-$(CONFIG_ARCH_QCOM)                += qcom/
>  obj-$(CONFIG_ARCH_RENESAS)     += renesas/
> diff --git a/drivers/soc/lantiq/Makefile b/drivers/soc/lantiq/Makefile
> new file mode 100644
> index 000000000000..35aa86bd1023
> --- /dev/null
> +++ b/drivers/soc/lantiq/Makefile
> @@ -0,0 +1 @@
> +obj-y                          += fpi-bus.o
> diff --git a/drivers/soc/lantiq/fpi-bus.c b/drivers/soc/lantiq/fpi-bus.c
> new file mode 100644
> index 000000000000..a671c9984c4c
> --- /dev/null
> +++ b/drivers/soc/lantiq/fpi-bus.c
> @@ -0,0 +1,87 @@
> +/*
> + *  This program is free software; you can redistribute it and/or modify it
> + *  under the terms of the GNU General Public License version 2 as published
> + *  by the Free Software Foundation.
> + *
> + *  Copyright (C) 2011-2015 John Crispin <blogic@xxxxxxxxxxx>
> + *  Copyright (C) 2015 Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> + *  Copyright (C) 2017 Hauke Mehrtens <hauke@xxxxxxxxxx>
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +
> +#include <lantiq_soc.h>
> +
> +#define XBAR_ALWAYS_LAST       0x430
> +#define XBAR_FPI_BURST_EN      BIT(1)
> +#define XBAR_AHB_BURST_EN      BIT(2)
> +
> +#define RCU_VR9_BE_AHB1S       0x00000008
> +
> +static int ltq_fpi_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct device_node *np = dev->of_node;
> +       struct resource *res_xbar;
> +       struct regmap *rcu_regmap;
> +       void __iomem *xbar_membase;
> +       u32 rcu_ahb_endianness_reg_offset;
> +       int ret;
> +
> +       res_xbar = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       xbar_membase = devm_ioremap_resource(dev, res_xbar);
> +       if (IS_ERR(xbar_membase))
> +               return PTR_ERR(xbar_membase);
> +
> +       /* RCU configuration is optional */
> +       rcu_regmap = syscon_regmap_lookup_by_phandle(np, "lantiq,rcu");
> +       if (IS_ERR(rcu_regmap))
> +               return PTR_ERR(rcu_regmap);
> +
> +       ret = device_property_read_u32(dev, "lantiq,offset-endianness",
> +                                      &rcu_ahb_endianness_reg_offset);
> +       if (ret) {
> +               dev_err(&pdev->dev, "Failed to get RCU reg offset\n");
> +               return ret;
> +       }
> +
> +       ret = regmap_update_bits(rcu_regmap, rcu_ahb_endianness_reg_offset,
> +                                RCU_VR9_BE_AHB1S, RCU_VR9_BE_AHB1S);
> +       if (ret) {
> +               dev_warn(&pdev->dev,
> +                        "Failed to configure RCU AHB endianness\n");
> +               return ret;
> +       }
> +
> +       /* disable fpi burst */
> +       ltq_w32_mask(XBAR_FPI_BURST_EN, 0, xbar_membase + XBAR_ALWAYS_LAST);
> +
> +       return of_platform_populate(dev->of_node, NULL, NULL, dev);
> +}
> +
> +static const struct of_device_id ltq_fpi_match[] = {
> +       { .compatible = "lantiq,xrx200-fpi" },
> +       {},
> +};
> +MODULE_DEVICE_TABLE(of, ltq_fpi_match);
> +
> +static struct platform_driver ltq_fpi_driver = {
> +       .probe = ltq_fpi_probe,
> +       .driver = {
> +               .name = "fpi-xway",
> +               .of_match_table = ltq_fpi_match,
> +       },
> +};
> +
> +module_platform_driver(ltq_fpi_driver);
> +
> +MODULE_DESCRIPTION("Lantiq FPI bus driver");
> +MODULE_LICENSE("GPL");
> --
> 2.11.0
>



-- 
With Best Regards,
Andy Shevchenko
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux