Re: [PATCH linux-next v4 2/4] spi: imx: add selection for iMX53 and iMX6 controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Mark and Sascha

Could you please review my v4 patch set for i.MX SPI slave support

Thanks,
Jiada

On 06/13/2017 07:29 AM, Rob Herring wrote:
On Tue, Jun 13, 2017 at 12:28 AM, Jiada Wang<jiada_wang@xxxxxxxxxx>  wrote:
Hello Rob


On 06/13/2017 12:53 AM, Rob Herring wrote:
On Thu, Jun 08, 2017 at 02:16:01PM +0900, Jiada Wang wrote:
ECSPI contorller for iMX53 and iMX6 has few hardware issues
comparing to iMX51.
The change add possibility to detect which controller is used
to apply possible workaround and limitations.

Signed-off-by: Jiada Wang<jiada_wang@xxxxxxxxxx>
---
  .../devicetree/bindings/spi/fsl-imx-cspi.txt       |  1 +
  drivers/spi/spi-imx.c                              | 26
++++++++++++++++++++--
  2 files changed, 25 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 31b5b21..5bf1396 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -9,6 +9,7 @@ Required properties:
    - "fsl,imx31-cspi" for SPI compatible with the one integrated on
i.MX31
    - "fsl,imx35-cspi" for SPI compatible with the one integrated on
i.MX35
    - "fsl,imx51-ecspi" for SPI compatible with the one integrated on
i.MX51
+  - "fsl,imx53-ecspi" for SPI compatible with the one integrated on
i.MX53 and later Soc
  - reg : Offset and length of the register set for the device
  - interrupts : Should contain CSPI/eCSPI interrupt
  - cs-gpios : Specifies the gpio pins to be used for chipselects.
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 4469121..8e6f339 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -63,7 +63,8 @@ enum spi_imx_devtype {
         IMX27_CSPI,
         IMX31_CSPI,
         IMX35_CSPI,     /* CSPI on all i.mx except above */
-       IMX51_ECSPI,    /* ECSPI on i.mx51 and later */
+       IMX51_ECSPI,    /* ECSPI on i.mx51 */
+       IMX53_ECSPI,    /* ECSPI on i.mx53 and later */

Looks like i.MX51 and i.MX53 are the same. While the DT should have
different compatibles (with fallbacks), the driver should map them to
the same type until there's some difference found.

the difference between i.MX51 and i.MX53 is introduced in the
4th patch "spi: imx: Add support for SPI Slave mode" in this patch set
Okay, I missed that.

do you think, I need to merge the two patches into one?
No, not necessary.

Acked-by: Rob Herring<robh@xxxxxxxxxx>

Rob

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux