This is needed for v1, where the i/o completion is not handled in the dma driver. Signed-off-by: Andy Gross <andy.gross@xxxxxxxxxx> Signed-off-by: Varadarajan Narayanan <varada@xxxxxxxxxxxxxx> --- drivers/spi/spi-qup.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c index 872de28..bd53e82 100644 --- a/drivers/spi/spi-qup.c +++ b/drivers/spi/spi-qup.c @@ -510,9 +510,9 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id) writel_relaxed(qup_err, controller->base + QUP_ERROR_FLAGS); writel_relaxed(spi_err, controller->base + SPI_ERROR_FLAGS); - writel_relaxed(opflags, controller->base + QUP_OPERATIONAL); if (!xfer) { + writel_relaxed(opflags, controller->base + QUP_OPERATIONAL); dev_err_ratelimited(controller->dev, "unexpected irq %08x %08x %08x\n", qup_err, spi_err, opflags); return IRQ_HANDLED; @@ -540,7 +540,15 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id) error = -EIO; } - if (!spi_qup_is_dma_xfer(controller->mode)) { + if (spi_qup_is_dma_xfer(controller->mode)) { + writel_relaxed(opflags, controller->base + QUP_OPERATIONAL); + if (opflags & QUP_OP_IN_SERVICE_FLAG && + opflags & QUP_OP_MAX_INPUT_DONE_FLAG) + complete(&controller->rxc); + if (opflags & QUP_OP_OUT_SERVICE_FLAG && + opflags & QUP_OP_MAX_OUTPUT_DONE_FLAG) + complete(&controller->txc); + } else { if (opflags & QUP_OP_IN_SERVICE_FLAG) spi_qup_read(controller, xfer); @@ -553,6 +561,9 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id) controller->xfer = xfer; spin_unlock_irqrestore(&controller->lock, flags); + /* re-read opflags as flags may have changed due to actions above */ + opflags = readl_relaxed(controller->base + QUP_OPERATIONAL); + if ((controller->rx_bytes == xfer->len && (opflags & QUP_OP_MAX_INPUT_DONE_FLAG)) || error) complete(&controller->done); -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html