this patch adds support for adjust register design. Signed-off-by: Leilk Liu <leilk.liu@xxxxxxxxxxxx> --- drivers/spi/spi-mt65xx.c | 45 ++++++++++++++++++++++++++---- include/linux/platform_data/spi-mt65xx.h | 2 ++ 2 files changed, 42 insertions(+), 5 deletions(-) diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 278867a..3d7cd2d 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -35,11 +35,15 @@ #define SPI_CMD_REG 0x0018 #define SPI_STATUS0_REG 0x001c #define SPI_PAD_SEL_REG 0x0024 +#define SPI_CFG2_REG 0x0028 #define SPI_CFG0_SCK_HIGH_OFFSET 0 #define SPI_CFG0_SCK_LOW_OFFSET 8 #define SPI_CFG0_CS_HOLD_OFFSET 16 #define SPI_CFG0_CS_SETUP_OFFSET 24 +#define SPI_ADJUST_CFG0_SCK_LOW_OFFSET 16 +#define SPI_ADJUST_CFG0_CS_HOLD_OFFSET 0 +#define SPI_ADJUST_CFG0_CS_SETUP_OFFSET 16 #define SPI_CFG1_CS_IDLE_OFFSET 0 #define SPI_CFG1_PACKET_LOOP_OFFSET 8 @@ -55,6 +59,8 @@ #define SPI_CMD_RST BIT(2) #define SPI_CMD_PAUSE_EN BIT(4) #define SPI_CMD_DEASSERT BIT(5) +#define SPI_CMD_SAMPLE_SEL BIT(6) +#define SPI_CMD_CS_POL BIT(7) #define SPI_CMD_CPHA BIT(8) #define SPI_CMD_CPOL BIT(9) #define SPI_CMD_RX_DMA BIT(10) @@ -80,6 +86,8 @@ struct mtk_spi_compatible { bool need_pad_sel; /* Must explicitly send dummy Tx bytes to do Rx only transfer */ bool must_tx; + /* some IC design adjust register define */ + bool adjust_reg; }; struct mtk_spi { @@ -108,6 +116,8 @@ struct mtk_spi { static const struct mtk_chip_config mtk_default_chip_info = { .rx_mlsb = 1, .tx_mlsb = 1, + .cs_pol = 0, + .sample_sel = 0, }; static const struct of_device_id mtk_spi_of_match[] = { @@ -182,6 +192,17 @@ static int mtk_spi_prepare_message(struct spi_master *master, reg_val |= SPI_CMD_RX_ENDIAN; #endif + if (mdata->dev_comp->adjust_reg) { + if (chip_config->cs_pol) + reg_val |= SPI_CMD_CS_POL; + else + reg_val &= ~SPI_CMD_CS_POL; + if (chip_config->sample_sel) + reg_val |= SPI_CMD_SAMPLE_SEL; + else + reg_val &= ~SPI_CMD_SAMPLE_SEL; + } + /* set finish and pause interrupt always enable */ reg_val |= SPI_CMD_FINISH_IE | SPI_CMD_PAUSE_IE; @@ -233,11 +254,25 @@ static void mtk_spi_prepare_transfer(struct spi_master *master, sck_time = (div + 1) / 2; cs_time = sck_time * 2; - reg_val |= (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_HIGH_OFFSET); - reg_val |= (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_LOW_OFFSET); - reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET); - reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG0_CS_SETUP_OFFSET); - writel(reg_val, mdata->base + SPI_CFG0_REG); + if (mdata->dev_comp->adjust_reg) { + reg_val |= (((sck_time - 1) & 0xffff) + << SPI_CFG0_SCK_HIGH_OFFSET); + reg_val |= (((sck_time - 1) & 0xffff) + << SPI_ADJUST_CFG0_SCK_LOW_OFFSET); + writel(reg_val, mdata->base + SPI_CFG2_REG); + reg_val |= (((cs_time - 1) & 0xffff) + << SPI_ADJUST_CFG0_CS_HOLD_OFFSET); + reg_val |= (((cs_time - 1) & 0xffff) + << SPI_ADJUST_CFG0_CS_SETUP_OFFSET); + writel(reg_val, mdata->base + SPI_CFG0_REG); + } else { + reg_val |= (((sck_time - 1) & 0xff) + << SPI_CFG0_SCK_HIGH_OFFSET); + reg_val |= (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_LOW_OFFSET); + reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET); + reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG0_CS_SETUP_OFFSET); + writel(reg_val, mdata->base + SPI_CFG0_REG); + } reg_val = readl(mdata->base + SPI_CFG1_REG); reg_val &= ~SPI_CFG1_CS_IDLE_MASK; diff --git a/include/linux/platform_data/spi-mt65xx.h b/include/linux/platform_data/spi-mt65xx.h index 54b0448..ba4e4bb 100644 --- a/include/linux/platform_data/spi-mt65xx.h +++ b/include/linux/platform_data/spi-mt65xx.h @@ -16,5 +16,7 @@ struct mtk_chip_config { u32 tx_mlsb; u32 rx_mlsb; + u32 cs_pol; + u32 sample_sel; }; #endif -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html