Re: [PATCH RFC 0/5] *** SPI Slave mode support ***

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jiada,

On Tue, Apr 25, 2017 at 9:56 AM, Jiada Wang <jiada_wang@xxxxxxxxxx> wrote:
> On 04/24/2017 06:10 AM, Geert Uytterhoeven wrote:
>> On Mon, Apr 24, 2017 at 2:48 PM, Jiada Wang<jiada_wang@xxxxxxxxxx>  wrote:
>>> On 04/24/2017 03:55 AM, Geert Uytterhoeven wrote:
>>>> On Fri, Apr 14, 2017 at 7:39 AM, Jiada Wang<jiada_wang@xxxxxxxxxx>
>>>> wrote:
>>>>> Our use case is to use spidev as an interface to communicate with
>>>>> external
>>>>> SPI master devices.
>>>>> meanwhile the SPI bus controller can also act as master device to send
>>>>> data
>>>>> to other
>>>>> SPI slave devices on the board.
>>>>
>>>> That sounds a bit hackish to me. SPI was never meant to be a
>>>> multi-master
>>>> bus.
>>>> While it can be done, you will need external synchronization (signals)
>>>> to
>>>> avoid conflicts between the SPI masters.
>>>
>>> It doesn't need to be a multi-master bus,
>>> for example A is master device for slave device B.
>>> while B has its own slave device C
>>> for each SPI connection A<=>  B, and B<=>  C, there is only one master
>>> device.
>>>
>>> and I think from use case point of view, it's very normal,
>>> one CPU upon receives command from external SPI master device,
>>> it writes data to its own slave device (EEPROM) connected to it.
>>
>> So "A<=>  B" and "B<=>  C" are two distinct SPI buses?
>> Or do they share some signals?
>>
>> Your comment seems to suggest otherwise:
>
> the use case of
> "A (master) <=> B (slave)", "B (master) <=> C(slave)", do share MISO and
> MOSI lines,
> but there is no SS line between A and C. so for each SPI slave device, there
> is only one
> master device.

Do you share CLK, too? Then you need a slave select from B to C.
If you use a separate clock, the slave select from B to C can be optional.

> so I think the question becomes whether the above mentioned hardware setup
> is valid or not.

It's a non-conventional SPI bus setup, but it can work, provided you have
some form of synchronization between A and B.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux