On Mon, Apr 17, 2017 at 9:29 PM, Hauke Mehrtens <hauke@xxxxxxxxxx> wrote: > From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> > > Do not export the ltq_reset_cause() and ltq_boot_select() function any > more. ltq_reset_cause() was accessed by the watchdog driver before to > see why the last reset happened, this is now done through direct access > of the register over regmap. The bits in this register are anyway > different between the xrx200 and the falcon SoC. > ltq_boot_select() is not used any more and was used by the flash > drivers to check if the system was booted from this flash type, now the > drivers should depend on the device tree only. > > Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx> Acked-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> (you could make yourself the author of this patch as I didn't touch this - but I think that this is a good thing to do!) > --- > arch/mips/include/asm/mach-lantiq/lantiq.h | 4 ---- > arch/mips/lantiq/falcon/reset.c | 22 ---------------------- > arch/mips/lantiq/xway/reset.c | 19 ------------------- > 3 files changed, 45 deletions(-) > > diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h > index 8064d7a4b33d..fa045b4c0cdd 100644 > --- a/arch/mips/include/asm/mach-lantiq/lantiq.h > +++ b/arch/mips/include/asm/mach-lantiq/lantiq.h > @@ -44,10 +44,6 @@ extern struct clk *clk_get_fpi(void); > extern struct clk *clk_get_io(void); > extern struct clk *clk_get_ppe(void); > > -/* find out what bootsource we have */ > -extern unsigned char ltq_boot_select(void); > -/* find out what caused the last cpu reset */ > -extern int ltq_reset_cause(void); > /* find out the soc type */ > extern int ltq_soc_type(void); > > diff --git a/arch/mips/lantiq/falcon/reset.c b/arch/mips/lantiq/falcon/reset.c > index 7a535d72f541..722114d7409d 100644 > --- a/arch/mips/lantiq/falcon/reset.c > +++ b/arch/mips/lantiq/falcon/reset.c > @@ -15,28 +15,6 @@ > > #include <lantiq_soc.h> > > -/* CPU0 Reset Source Register */ > -#define SYS1_CPU0RS 0x0040 > -/* reset cause mask */ > -#define CPU0RS_MASK 0x0003 > -/* CPU0 Boot Mode Register */ > -#define SYS1_BM 0x00a0 > -/* boot mode mask */ > -#define BM_MASK 0x0005 > - > -/* allow platform code to find out what surce we booted from */ > -unsigned char ltq_boot_select(void) > -{ > - return ltq_sys1_r32(SYS1_BM) & BM_MASK; > -} > - > -/* allow the watchdog driver to find out what the boot reason was */ > -int ltq_reset_cause(void) > -{ > - return ltq_sys1_r32(SYS1_CPU0RS) & CPU0RS_MASK; > -} > -EXPORT_SYMBOL_GPL(ltq_reset_cause); > - > #define BOOT_REG_BASE (KSEG1 | 0x1F200000) > #define BOOT_PW1_REG (BOOT_REG_BASE | 0x20) > #define BOOT_PW2_REG (BOOT_REG_BASE | 0x24) > diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c > index b6752c95a600..2dedcf939901 100644 > --- a/arch/mips/lantiq/xway/reset.c > +++ b/arch/mips/lantiq/xway/reset.c > @@ -119,25 +119,6 @@ static void ltq_rcu_w32_mask(uint32_t clr, uint32_t set, uint32_t reg_off) > spin_unlock_irqrestore(<q_rcu_lock, flags); > } > > -/* This function is used by the watchdog driver */ > -int ltq_reset_cause(void) > -{ > - u32 val = ltq_rcu_r32(RCU_RST_STAT); > - return val >> RCU_STAT_SHIFT; > -} > -EXPORT_SYMBOL_GPL(ltq_reset_cause); > - > -/* allow platform code to find out what source we booted from */ > -unsigned char ltq_boot_select(void) > -{ > - u32 val = ltq_rcu_r32(RCU_RST_STAT); > - > - if (of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) > - return RCU_BOOT_SEL_XRX200(val); > - > - return RCU_BOOT_SEL(val); > -} > - > struct ltq_gphy_reset { > u32 rd; > u32 addr; > -- > 2.11.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html