From: Jiada Wang <jiada_wang@xxxxxxxxxx> ECSPI contorller for iMX53 and iMX6 has few hardware issues comparing to iMX51. The change add possibility to detect which controller is used to apply possible workaround and limitations. Signed-off-by: Jiada Wang <jiada_wang@xxxxxxxxxx> --- drivers/spi/spi-imx.c | 43 ++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 40 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 9a7c62f..b2323b9 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -67,7 +67,8 @@ enum spi_imx_devtype { IMX27_CSPI, IMX31_CSPI, IMX35_CSPI, /* CSPI on all i.mx except above */ - IMX51_ECSPI, /* ECSPI on i.mx51 and later */ + IMX51_ECSPI, /* ECSPI on i.mx51 */ + IMX53_ECSPI, /* ECSPI on i.mx53 and later */ }; struct spi_imx_data; @@ -127,9 +128,32 @@ static inline int is_imx51_ecspi(struct spi_imx_data *d) return d->devtype_data->devtype == IMX51_ECSPI; } +static inline int is_imx53_ecspi(struct spi_imx_data *d) +{ + return d->devtype_data->devtype == IMX53_ECSPI; +} + static inline unsigned spi_imx_get_fifosize(struct spi_imx_data *d) { - return is_imx51_ecspi(d) ? 64 : 8; + switch (d->devtype_data->devtype) { + case IMX51_ECSPI: + case IMX53_ECSPI: + return 64; + default: + return 8; + } +} + +static inline bool spi_imx_has_dmamode(struct spi_imx_data *d) +{ + switch (d->devtype_data->devtype) { + case IMX35_CSPI: + case IMX51_ECSPI: + case IMX53_ECSPI: + return true; + default: + return false; + } } #define MXC_SPI_BUF_RX(type) \ @@ -746,6 +770,15 @@ static struct spi_imx_devtype_data imx51_ecspi_devtype_data = { .devtype = IMX51_ECSPI, }; +static struct spi_imx_devtype_data imx53_ecspi_devtype_data = { + .intctrl = mx51_ecspi_intctrl, + .config = mx51_ecspi_config, + .trigger = mx51_ecspi_trigger, + .rx_available = mx51_ecspi_rx_available, + .reset = mx51_ecspi_reset, + .devtype = IMX53_ECSPI, +}; + static const struct platform_device_id spi_imx_devtype[] = { { .name = "imx1-cspi", @@ -766,6 +799,9 @@ static const struct platform_device_id spi_imx_devtype[] = { .name = "imx51-ecspi", .driver_data = (kernel_ulong_t) &imx51_ecspi_devtype_data, }, { + .name = "imx53-ecspi", + .driver_data = (kernel_ulong_t) &imx53_ecspi_devtype_data, + }, { /* sentinel */ } }; @@ -777,6 +813,7 @@ static const struct of_device_id spi_imx_dt_ids[] = { { .compatible = "fsl,imx31-cspi", .data = &imx31_cspi_devtype_data, }, { .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, }, { .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, }, + { .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, spi_imx_dt_ids); @@ -1266,7 +1303,7 @@ static int spi_imx_probe(struct platform_device *pdev) * Only validated on i.mx35 and i.mx6 now, can remove the constraint * if validated on other chips. */ - if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx)) { + if (spi_imx_has_dmamode(spi_imx)) { ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master); if (ret == -EPROBE_DEFER) goto out_clk_put; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html