The patch spi: imx: set spi_bus_clk for mx1, mx31 and mx35 has been applied to the spi tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 2636ba8fa39915c7b8d73166961ebbb4c14251cd Mon Sep 17 00:00:00 2001 From: Martin Kaiser <martin@xxxxxxxxx> Date: Thu, 1 Sep 2016 22:38:40 +0200 Subject: [PATCH] spi: imx: set spi_bus_clk for mx1, mx31 and mx35 Modify spi_imx_clkdiv_2() to return the resulting bus clock frequency when the selected clock divider is applied. Set spi_imx->spi_bus_clk to this frequency. If spi_bus_clk is unset, spi_imx_calculate_timeout() causes a division by 0. Signed-off-by: Martin Kaiser <martin@xxxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/spi/spi-imx.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index f63cb30f9010..5cc72be30744 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -186,17 +186,19 @@ static unsigned int spi_imx_clkdiv_1(unsigned int fin, /* MX1, MX31, MX35, MX51 CSPI */ static unsigned int spi_imx_clkdiv_2(unsigned int fin, - unsigned int fspi) + unsigned int fspi, unsigned int *fres) { int i, div = 4; for (i = 0; i < 7; i++) { if (fspi * div >= fin) - return i; + goto out; div <<= 1; } - return 7; +out: + *fres = fin / div; + return i; } static int spi_imx_bytes_per_word(const int bpw) @@ -482,9 +484,11 @@ static int mx31_config(struct spi_device *spi, struct spi_imx_config *config) { struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; + unsigned int clk; - reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << + reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz, &clk) << MX31_CSPICTRL_DR_SHIFT; + spi_imx->spi_bus_clk = clk; if (is_imx35_cspi(spi_imx)) { reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT; @@ -625,9 +629,12 @@ static int mx1_config(struct spi_device *spi, struct spi_imx_config *config) { struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER; + unsigned int clk; - reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << + reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz, &clk) << MX1_CSPICTRL_DR_SHIFT; + spi_imx->spi_bus_clk = clk; + reg |= config->bpw - 1; if (spi->mode & SPI_CPHA) -- 2.8.1 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html