Add definition of further register bits for use in upcoming driver extensions and improve current bit definitions: - use BIT macro - use bit names as in the chip spec Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx> --- drivers/spi/spi-fsl-espi.c | 52 +++++++++++++++++++++++++++++----------------- 1 file changed, 33 insertions(+), 19 deletions(-) diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index 328b04a..a7984ae 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -37,18 +37,18 @@ #define ESPI_SPMODEx(x) (ESPI_SPMODE0 + (x) * 4) /* eSPI Controller mode register definitions */ -#define SPMODE_ENABLE (1 << 31) -#define SPMODE_LOOP (1 << 30) +#define SPMODE_ENABLE BIT(31) +#define SPMODE_LOOP BIT(30) #define SPMODE_TXTHR(x) ((x) << 8) #define SPMODE_RXTHR(x) ((x) << 0) /* eSPI Controller CS mode register definitions */ -#define CSMODE_CI_INACTIVEHIGH (1 << 31) -#define CSMODE_CP_BEGIN_EDGECLK (1 << 30) -#define CSMODE_REV (1 << 29) -#define CSMODE_DIV16 (1 << 28) +#define CSMODE_CI_INACTIVEHIGH BIT(31) +#define CSMODE_CP_BEGIN_EDGECLK BIT(30) +#define CSMODE_REV BIT(29) +#define CSMODE_DIV16 BIT(28) #define CSMODE_PM(x) ((x) << 24) -#define CSMODE_POL_1 (1 << 20) +#define CSMODE_POL_1 BIT(20) #define CSMODE_LEN(x) ((x) << 16) #define CSMODE_BEF(x) ((x) << 12) #define CSMODE_AFT(x) ((x) << 8) @@ -60,18 +60,32 @@ | CSMODE_AFT(0) | CSMODE_CG(1)) /* SPIE register values */ -#define SPIE_NE 0x00000200 /* Not empty */ -#define SPIE_NF 0x00000100 /* Not full */ - -/* SPIM register values */ -#define SPIM_NE 0x00000200 /* Not empty */ -#define SPIM_NF 0x00000100 /* Not full */ #define SPIE_RXCNT(reg) ((reg >> 24) & 0x3F) #define SPIE_TXCNT(reg) ((reg >> 16) & 0x3F) +#define SPIE_TXE BIT(15) /* TX FIFO empty */ +#define SPIE_DON BIT(14) /* TX done */ +#define SPIE_RXT BIT(13) /* RX FIFO threshold */ +#define SPIE_RXF BIT(12) /* RX FIFO full */ +#define SPIE_TXT BIT(11) /* TX FIFO threshold*/ +#define SPIE_RNE BIT(9) /* RX FIFO not empty */ +#define SPIE_TNF BIT(8) /* TX FIFO not full */ + +/* SPIM register values */ +#define SPIM_TXE BIT(15) /* TX FIFO empty */ +#define SPIM_DON BIT(14) /* TX done */ +#define SPIM_RXT BIT(13) /* RX FIFO threshold */ +#define SPIM_RXF BIT(12) /* RX FIFO full */ +#define SPIM_TXT BIT(11) /* TX FIFO threshold*/ +#define SPIM_RNE BIT(9) /* RX FIFO not empty */ +#define SPIM_TNF BIT(8) /* TX FIFO not full */ /* SPCOM register values */ #define SPCOM_CS(x) ((x) << 30) +#define SPCOM_DO BIT(28) /* Dual output */ +#define SPCOM_TO BIT(27) /* TX only */ +#define SPCOM_RXSKIP(x) ((x) << 16) #define SPCOM_TRANLEN(x) ((x) << 0) + #define SPCOM_TRANLEN_MAX 0x10000 /* Max transaction length */ #define AUTOSUSPEND_TIMEOUT 2000 @@ -263,7 +277,7 @@ static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t) (SPCOM_CS(spi->chip_select) | SPCOM_TRANLEN(t->len - 1))); /* enable rx ints */ - fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPIM, SPIM_NE); + fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPIM, SPIM_RNE); /* transmit word */ word = mpc8xxx_spi->get_tx(mpc8xxx_spi); @@ -405,7 +419,7 @@ static void fsl_espi_cleanup(struct spi_device *spi) static void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) { /* We need handle RX first */ - if (events & SPIE_NE) { + if (events & SPIE_RNE) { u32 rx_data, tmp; u8 rx_data_8; int rx_nr_bytes = 4; @@ -427,7 +441,7 @@ static void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) rx_data = fsl_espi_read_reg(mspi, ESPI_SPIRF); } else if (mspi->len <= 0) { dev_err(mspi->dev, - "unexpected RX(SPIE_NE) interrupt occurred,\n" + "unexpected RX(SPIE_RNE) interrupt occurred,\n" "(local rxlen %d bytes, reg rxlen %d bytes)\n", min(4, mspi->len), SPIE_RXCNT(events)); rx_nr_bytes = 0; @@ -450,14 +464,14 @@ static void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) mspi->get_rx(rx_data, mspi); } - if (!(events & SPIE_NF)) { + if (!(events & SPIE_TNF)) { int ret; /* spin until TX is done */ ret = spin_event_timeout(((events = fsl_espi_read_reg( - mspi, ESPI_SPIE)) & SPIE_NF), 1000, 0); + mspi, ESPI_SPIE)) & SPIE_TNF), 1000, 0); if (!ret) { - dev_err(mspi->dev, "tired waiting for SPIE_NF\n"); + dev_err(mspi->dev, "tired waiting for SPIE_TNF\n"); complete(&mspi->done); return; } -- 2.9.2 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html