On Wed, Jul 13, 2016 at 1:53 PM, Crestez Dan Leonard <leonard.crestez@xxxxxxxxx> wrote: > When using devicetree spi_device.modalias is set to the compatible > string with the vendor prefix removed. For SPI devices described via > ACPI the i2c_board_info.type string is initialized by acpi_device_hid. > When using ACPI and DT ids this string ends up something like "PRP0001". > > Change acpi_register_spi_device to use the of_compatible property if > present. This makes it easier to instantiate spi drivers through ACPI > with DT ids. > > Signed-off-by: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx> Same as for the i2c patch: it looks good to me, but I'd prefer to get a word from Mika on it too. > --- > drivers/spi/spi.c | 11 ++++++++++- > 1 file changed, 10 insertions(+), 1 deletion(-) > > diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c > index 7589c8a..49fdf6e 100644 > --- a/drivers/spi/spi.c > +++ b/drivers/spi/spi.c > @@ -1679,13 +1679,22 @@ static acpi_status acpi_register_spi_device(struct spi_master *master, > return AE_OK; > } > > + if (adev->data.of_compatible) { > + ret = acpi_of_modalias(adev, spi->modalias, sizeof(spi->modalias)); > + if (ret) { > + spi_dev_put(spi); > + return AE_NOT_FOUND; > + } > + } else { > + strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias)); > + } > + > if (spi->irq < 0) > spi->irq = acpi_dev_gpio_irq_get(adev, 0); > > acpi_device_set_enumerated(adev); > > adev->power.flags.ignore_parent = true; > - strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias)); > if (spi_add_device(spi)) { > adev->power.flags.ignore_parent = false; > dev_err(&master->dev, "failed to add SPI device %s from ACPI\n", > -- Thanks, Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html