The patch spi: pxa2xx-pci: Support both chipselects on Braswell has been applied to the spi tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From ca80ef718b12eebe247b776d4b97a5e571bb489d Mon Sep 17 00:00:00 2001 From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Date: Tue, 5 Jul 2016 23:12:05 +0300 Subject: [PATCH] spi: pxa2xx-pci: Support both chipselects on Braswell The commit 30f3a6ab44d8 ("spi: pxa2xx: Add support for both chip selects on Intel Braswell") introduces a support of chipselects for Intel Braswell SPI host controller. Though it missed to convert the PCI part of the driver. Do conversion here which enables both chipselects on Intel Braswell when enumerated via PCI. We don't care about num_chipselect value since it is overrided inside core driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Acked-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/spi/spi-pxa2xx-pci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index 5953edc86ec8..f3df522db93b 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -127,21 +127,21 @@ static struct pxa_spi_info spi_info_configs[] = { .rx_param = &byt_rx_param, }, [PORT_BSW0] = { - .type = LPSS_BYT_SSP, + .type = LPSS_BSW_SSP, .port_id = 0, .setup = lpss_spi_setup, .tx_param = &bsw0_tx_param, .rx_param = &bsw0_rx_param, }, [PORT_BSW1] = { - .type = LPSS_BYT_SSP, + .type = LPSS_BSW_SSP, .port_id = 1, .setup = lpss_spi_setup, .tx_param = &bsw1_tx_param, .rx_param = &bsw1_rx_param, }, [PORT_BSW2] = { - .type = LPSS_BYT_SSP, + .type = LPSS_BSW_SSP, .port_id = 2, .setup = lpss_spi_setup, .tx_param = &bsw2_tx_param, -- 2.8.1 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html