Re: [PATCH] spi: s3c64xx: do not disable the clock while configuring the spi

[Andi Shyti <andi.shyti@xxxxxxxxxxx>]

Hi,

>  	if (sdd->port_conf->clk_from_cmu) {
> -		/* Configure Clock */
> -		/* There is half-multiplier before the SPI */
>  		clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);

sorry, I will re-send it because I should not remove the comments
above.... in the future someone might wonder why it's multiplied
by 2.

That's called auto review and auto-nack :)

Andi

> -		/* Enable Clock */
> -		clk_prepare_enable(sdd->src_clk);
>  	} else {
>  		/* Configure Clock */
>  		val = readl(regs + S3C64XX_SPI_CLK_CFG);
> -- 
> 2.8.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html