The SPI controllers used on Intel Merrifield are PXA2XX compatible. This patch enables them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/spi/spi-pxa2xx-pci.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index 8d58598..b025eaf 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -15,6 +15,7 @@ enum { PORT_CE4100, PORT_BYT, + PORT_MRFLD, PORT_BSW0, PORT_BSW1, PORT_BSW2, @@ -89,6 +90,27 @@ static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c) return 0; } +static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c) +{ + switch (PCI_FUNC(dev->devfn)) { + case 0: + c->port_id = 3; + c->num_chipselect = 1; + break; + case 1: + c->port_id = 5; + c->num_chipselect = 4; + break; + case 2: + c->port_id = 6; + c->num_chipselect = 1; + break; + default: + return -ENODEV; + } + return 0; +} + static struct pxa_spi_info spi_info_configs[] = { [PORT_CE4100] = { .type = PXA25x_SSP, @@ -124,6 +146,11 @@ static struct pxa_spi_info spi_info_configs[] = { .tx_param = &bsw2_tx_param, .rx_param = &bsw2_rx_param, }, + [PORT_MRFLD] = { + .type = PXA27x_SSP, + .max_clk_rate = 25000000, + .setup = mrfld_spi_setup, + }, [PORT_QUARK_X1000] = { .type = QUARK_X1000_SSP, .port_id = -1, @@ -222,6 +249,7 @@ static const struct pci_device_id pxa2xx_spi_pci_devices[] = { { PCI_VDEVICE(INTEL, 0x2e6a), PORT_CE4100 }, { PCI_VDEVICE(INTEL, 0x0935), PORT_QUARK_X1000 }, { PCI_VDEVICE(INTEL, 0x0f0e), PORT_BYT }, + { PCI_VDEVICE(INTEL, 0x1194), PORT_MRFLD }, { PCI_VDEVICE(INTEL, 0x228e), PORT_BSW0 }, { PCI_VDEVICE(INTEL, 0x2290), PORT_BSW1 }, { PCI_VDEVICE(INTEL, 0x22ac), PORT_BSW2 }, -- 2.8.1 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html