devm_* API is supposed to be used only in probe function call. The resource is allocated at 'probe' and free automatically at 'remove'. Usage of devm_* functions outside probe sometimes leads to resource leak. Thus avoid using devm_* APIs in .setup/.cleanup callbacks. Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx> --- drivers/spi/spi-st-ssc4.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spi-st-ssc4.c b/drivers/spi/spi-st-ssc4.c index d5adf9f..fb6ed8b 100644 --- a/drivers/spi/spi-st-ssc4.c +++ b/drivers/spi/spi-st-ssc4.c @@ -201,10 +201,7 @@ static int spi_st_transfer_one(struct spi_master *master, static void spi_st_cleanup(struct spi_device *spi) { - int cs = spi->cs_gpio; - - if (gpio_is_valid(cs)) - devm_gpio_free(&spi->dev, cs); + gpio_free(spi->cs_gpio); } /* the spi->mode bits understood by this driver: */ @@ -227,14 +224,15 @@ static int spi_st_setup(struct spi_device *spi) return -EINVAL; } - if (devm_gpio_request(&spi->dev, cs, dev_name(&spi->dev))) { + ret = gpio_request(cs, dev_name(&spi->dev)); + if (ret) { dev_err(&spi->dev, "could not request gpio:%d\n", cs); - return -EINVAL; + return ret; } ret = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH); if (ret) - return ret; + goto out_free_gpio; spi_st_clk = clk_get_rate(spi_st->clk); @@ -243,7 +241,8 @@ static int spi_st_setup(struct spi_device *spi) if (sscbrg < 0x07 || sscbrg > BIT(16)) { dev_err(&spi->dev, "baudrate %d outside valid range %d\n", sscbrg, hz); - return -EINVAL; + ret = -EINVAL; + goto out_free_gpio; } spi_st->baud = spi_st_clk / (2 * sscbrg); @@ -292,6 +291,10 @@ static int spi_st_setup(struct spi_device *spi) readl_relaxed(spi_st->base + SSC_RBUF); return 0; + +out_free_gpio: + gpio_free(cs); + return ret; } /* Interrupt fired when TX shift register becomes empty */ -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html