Added device tree bindings documentation for SoCs supported by the
new spi-bcm-qspi driver.
Signed-off-by: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@xxxxxxxxxxxx>
---
V2 change renames file to brcm,spi-bcm-qspi.txt
---
.../devicetree/bindings/spi/brcm,spi-bcm-qspi.txt | 228 +++++++++++++++++++++
1 file changed, 228 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
new file mode 100644
index 0000000..a79a384
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
@@ -0,0 +1,228 @@
+Broadcom SPI controller
+
+The Broadcom SPI controller is a SPI master found on various SOCs, including
+BRCMSTB (BCM7XXX), Cygnus, NSP and NS2.
+
+Required properties:
+
+- #address-cells:
+ Must be <1>, as required by generic SPI binding.
+
+- #size-cells:
+ Must be <0>, also as required by generic SPI binding.
+
+- compatible:
+ Must be one of :
+ "brcm,spi-bcm-qspi"
+ "brcm,spi-brmstb" spi-nor and/or "brcm,spi-brmstb-mspi" unmanaged SPI Master
+
+- reg:
+ Define the bases and ranges of the associated I/O address spaces.
+ The required range is MSPI controller registers and interrupt registers, the others
+ are optional Boot SPI (BSPI) portion for fast flash reads.
+
+- reg-names:
+ First name does not matter, but must be reserved for the MSPI controller
+ register range as mentioned in 'reg' above, and will typically contain
+ - "bspi_regs": BSPI register range
+ - "mspi_regs": MSPI register range
+ - "intr_regs", "intr_status_reg" : Interrupt and status register for NSP, NS2 SoC
+ - "hif_spi_intr2" : Interrupt and status register for BRCMSTB SoC
+
+- interrupts
+ The interrupts used by the MSPI and/or BSPI controller.
+
+- interrupt-names:
+ Names of interrupts associated with this MSPI and/or BSPI controller.
+ - "mspi_halted" :
+ - "mspi_done": Indicates that the requested SPI operation is complete.
+ - "spi_lr_fullness_reached" : Linear read BSPI pipe full
+ - "spi_lr_session_aborted" : Linear read BSPI pipe aborted
+ - "spi_lr_impatient" : Linear read BSPI requested when pipe empty
+ - "spi_lr_session_done" : Linear read BSPI session done
+
+Optional properties:
+
+- clocks:
+ A phandle to the reference clock for this block. If not present, will
+ assume a 27 MHz fixed clock (default for UPG).
+
+
+Optional properties:
+
+- clocks:
+ A phandle to the reference clock for this block.
+
+- bspi-sel:
+ Chip selects that requires bspi support.
+
+
+Examples:
+
+BRCMSTB SoC Example:
+
+ SPI Master for SPI-NOR:
+
+ spi@f03e3400 {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "brcm,qspi-brcmstb";
+ reg = <0xf03e0920 0x4 0xf03e3400 0x188 0xf03e3200 0x50>;
+ reg-names = "cs_reg", "hif_mspi", "bspi";
+ interrupts = <0x6 0x5 0x4 0x3 0x2 0x1 0x0>;
+ interrupt-parent = <0x1c>;
+ interrupt-names = "mspi_halted",
+ "mspi_done",
+ "spi_lr_overread",
+ "spi_lr_session_done",
+ "spi_lr_impatient",
+ "spi_lr_session_aborted",
+ "spi_lr_fullness_reached";
+
+ clocks = <0x1b>;
+ clock-names = "sw_spi";
+
+ m25p80@0 {
+ #size-cells = <0x2>;
+ #address-cells = <0x2>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <0x2625a00>;
+ spi-cpol;
+ spi-cpha;
+ use-bspi;
+ m25p,fast-read;
+
+ flash0.bolt@0 {
+ reg = <0x0 0x0 0x0 0x100000>;
+ };
+
+ flash0.macadr@100000 {
+ reg = <0x0 0x100000 0x0 0x10000>;
+ };
+
+ flash0.nvram@110000 {
+ reg = <0x0 0x110000 0x0 0x10000>;
+ };
+
+ flash0.kernel@120000 {
+ reg = <0x0 0x120000 0x0 0x400000>;
+ };
+
+ flash0.devtree@520000 {
+ reg = <0x0 0x520000 0x0 0x10000>;
+ };
+
+ flash0.splash@530000 {
+ reg = <0x0 0x530000 0x0 0x80000>;
+ };
+
+ flash0@0 {
+ reg = <0x0 0x0 0x0 0x4000000>;
+ };
+ };
+ };
+
+
+ MSPI master:
+
+ spi@f0416000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&upg_fixed>;
+ compatible = "brcm,spi-brcmstb-mspi";
+ reg = <0xf0416000 0x180>;
+ reg-names = "mspi";
+ interrupts = <0x14>;
+ interrupt-parent = <&irq0_aon_intc>;
+ interrupt-names = "mspi_done";
+ };
+
+
+
+iProc SoC Example:
+
+ qspi: spi@18027200 {
+ compatible = "brcm,spi-bcm-qspi";
+ reg = <0x18027200 0x184>,
+ <0x18027000 0x124>,
+ <0x1811c408 0x004>,
+ <0x180273a0 0x01c>;
+ reg-names = "mspi_regs", "bspi_regs", "intr_regs", "intr_status_reg";
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names =
+ "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "mspi_done",
+ "mspi_halted";
+ clocks = <&iprocmed>;
+ clock-names = "iprocmed";
+ clock-frequency = <12500000>;
+ num-cs = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+
+ NS2 SoC Example:
+
+ qspi: spi@66470200 {
+ compatible = "brcm,spi-bcm-qspi";
+ reg = <0x66470200 0x184>,
+ <0x66470000 0x124>,
+ <0x67017408 0x004>,
+ <0x664703a0 0x01c>;
+ reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+ interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "spi_l1_intr";
+ clocks = <&iprocmed>;
+ clock-names = "iprocmed";
+ clock-frequency = <12500000>;
+ num-cs = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+
+ m25p80 node for NSP, NS2 and iProc
+
+ &qspi {
+ bspi-sel = <0>;
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ reg = <0x0>;
+ spi-max-frequency = <12500000>;
+ m25p,fast-read;
+ spi-cpol;
+ spi-cpha;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000a0000>;
+ };
+
+ partition@1 {
+ label = "env";
+ reg = <0x000a0000 0x00060000>;
+ };
+
+ partition@2 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+
+ partition@3 {
+ label = "rootfs";
+ reg = <0x00700000 0x01900000>;
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH V2, 1/4] dt: bindings: spi-bcm-qspi: NSP, NS2, BRCMSTB SoC bindings
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH V2, 1/4] dt: bindings: spi-bcm-qspi: NSP, NS2, BRCMSTB SoC bindings
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- Date: Fri, 27 May 2016 16:14:54 -0400
- Follow-Ups:
- [PATCH V2, 4/4] arm64: dts: Add ns2 SoC support
- From: Kamal Dasu
- [PATCH V2, 3/4] arm: dts: Add bcm-nsp and bcm958625k support
- From: Kamal Dasu
- [PATCH V2, 2/4] spi: bcm-qspi: Add SPI flash and MSPI driver
- From: Kamal Dasu
- [PATCH V2, 4/4] arm64: dts: Add ns2 SoC support
- Prev by Date: Re: [PATCH] spi: pxa2xx: use DMA by default if supported
- Next by Date: [PATCH V2, 2/4] spi: bcm-qspi: Add SPI flash and MSPI driver
- Previous by thread: [PATCH] spi: pxa2xx: use DMA by default if supported
- Next by thread: [PATCH V2, 2/4] spi: bcm-qspi: Add SPI flash and MSPI driver
- Index(es):
 |