On 20.04.2016 12:11, Stefan Roese wrote: > This patch adds support for the direct write mode to the Orion SPI > driver which is used on the Marvell Armada based SoCs. In this direct > mode, all data written to (or read from) a specifically mapped MBus > window (linked to one SPI chip-select on one of the SPI controllers) > will be transferred directly to the SPI bus. Without the need to control > the SPI registers in between. This can improve the SPI transfer rate in > such cases. > > Currently only the direct write mode is supported. This mode especially > benefits from the SPI direct mode, as the data bytes are written > head-to-head to the SPI bus, without any additional addresses, that > are also written in the direct read mode. > > One use-case for this direct write mode is, programming a FPGA bitstream > image into the FPGA connected to the SPI bus at maximum speed. > > This mode is described in chapter "22.5.2 Direct Write to SPI" in the > Marvell Armada XP Functional Spec Datasheet. > > It should be possible to support SPI-NOR and SPI-NAND devices via > this direct access mode as well. But this needs further work, e.g.: > - The mapping of the MBus window needs to get extended to span > the complete flash device size > - The address / control data needs to get inserted into the SPI > controller registers > > Signed-off-by: Stefan Roese <sr@xxxxxxx> > Cc: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> > Cc: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx> > Cc: Andrew Lunn <andrew@xxxxxxx> > Cc: Arnd Bergmann <arnd@xxxxxxxx> > Cc: Mark Brown <broonie@xxxxxxxxxx> Its been a while since v6 of this direct write access mode has been posted. This is a gentle ping on its status. Arnd / Mark, do you have any additional change requests or are you okay with the current version? Thanks, Stefan -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html