Re: [PATCHv2] wlcore: spi: add wl18xx support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sunday 10 April 2016 07:37:23 Reizer, Eyal wrote:
> Add support for using with both wl12xx and wl18xx.
> 
> - all wilink family needs special init command for entering wspi mode.
>   extra clock cycles should be sent after the spi init command while the
>   cs pin is high.
> - switch to controling the cs pin from the spi driver for achieveing the
>   above.
> - the selected cs gpio is read from the spi device-tree node using the
>   cs-gpios field and setup as a gpio.
> - See the example below for specifying the cs gpio using the cs-gpios entry
> &spi0   {
>         ...
>         cs-gpios = <&gpio0 5 0>;
>         ...
>         wlcore: wlcore@0 {
>                 compatible = "ti,wl1835";
>         ...
>         ...
>         };
> };
> 
> Signed-off-by: Eyal Reizer <eyalr@xxxxxx>

I don't think this can work in general: not all SPI hosts uses GPIOs
for controlling CS, so the logic can't work, and it's also a layering
violation for the driver to look at the parent.

I would suggest fixing this using a new API function from the SPI
core, if we don't already have a generic way to do it.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux