[PATCH v2 1/2] spi: pic32-sqi: add binding document for PIC32 Quad-SPI driver.

[Purna Chandra Mandal <purna.mandal@xxxxxxxxxxxxx>]

Document Device tree bindings for the quad SPI peripheral
found on Microchip PIC32 class devices.

Signed-off-by: Purna Chandra Mandal <purna.mandal@xxxxxxxxxxxxx>

Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxx>
---

Changes in v2: None

 Documentation/devicetree/bindings/spi/sqi-pic32.txt | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/sqi-pic32.txt

diff --git a/Documentation/devicetree/bindings/spi/sqi-pic32.txt b/Documentation/devicetree/bindings/spi/sqi-pic32.txt
new file mode 100644
index 0000000..5af9fab
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/sqi-pic32.txt
@@ -0,0 +1,18 @@
+Microchip PIC32 Quad SPI controller
+-----------------------------------
+Required properties:
+- compatible: Should be "microchip,pic32mzda-sqi".
+- reg: Address and length of SQI controller register space.
+- interrupts: Should contain SQI interrupt.
+- clocks: Should contain phandle of two clocks in sequence, clock that drives
+          clock on SPI bus and clock that drives SQI controller.
+- clock-names: Should be "spi_ck" and "reg_ck" in order.
+
+Example:
+	sqi1: sqi@1f8e2000 {
+		compatible = "microchip,pic32mzda-sqi";
+		reg = <0x1f8e2000 0x200>;
+		clocks = <&rootclk REF2CLK>, <&rootclk PB5CLK>;
+		clock-names = "spi_ck", "reg_ck";
+		interrupts = <169 IRQ_TYPE_LEVEL_HIGH>;
+	};
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html