On Sun, Dec 13, 2015 at 1:30 AM, Christophe Ricard <christophe.ricard@xxxxxxxxx> wrote: > When a gpio is used as an interrupt in acpi, the irq_type was not > available for device driver. > > Make available polarity and triggering information in acpi_find_gpio by > renaming acpi_gpio_info field active_low to polarity and adding triggering > field (edge/level). > For sanity, in gpiolib.c replace info.active_low by > "info.polarity == GPIO_ACTIVE_LOW". > > Set the irq_type if necessary in acpi_dev_gpio_irq_get. Same question about types here. If it's not about hardware no need to have them as u*. > > Signed-off-by: Christophe Ricard <christophe-h.ricard@xxxxxx> > --- > drivers/gpio/gpiolib-acpi.c | 28 ++++++++++++++++++++++------ > drivers/gpio/gpiolib.c | 4 ++-- > drivers/gpio/gpiolib.h | 6 ++++-- > 3 files changed, 28 insertions(+), 10 deletions(-) > > diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c > index bbcac3a..04aa69e 100644 > --- a/drivers/gpio/gpiolib-acpi.c > +++ b/drivers/gpio/gpiolib-acpi.c > @@ -416,9 +416,10 @@ static int acpi_find_gpio(struct acpi_resource *ares, void *data) > * GpioIo is used then the only way to set the flag is > * to use _DSD "gpios" property. > */ > - if (lookup->info.gpioint) > - lookup->info.active_low = > - agpio->polarity == ACPI_ACTIVE_LOW; > + if (lookup->info.gpioint) { > + lookup->info.polarity = agpio->polarity; > + lookup->info.triggering = agpio->triggering; > + } > } > > return 1; > @@ -510,7 +511,7 @@ struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev, > if (lookup.desc && info) { > *info = lookup.info; > if (active_low) > - info->active_low = active_low; > + info->polarity = active_low; > } > > return lookup.desc ? lookup.desc : ERR_PTR(-ENOENT); > @@ -530,6 +531,7 @@ struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev, > int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index) > { > int idx, i; > + u32 irq_flags; > > for (i = 0, idx = 0; idx <= index; i++) { > struct acpi_gpio_info info; > @@ -538,8 +540,22 @@ int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index) > desc = acpi_get_gpiod_by_index(adev, NULL, i, &info); > if (IS_ERR(desc)) > break; > - if (info.gpioint && idx++ == index) > - return gpiod_to_irq(desc); > + if (info.gpioint && idx++ == index) { > + int irq = gpiod_to_irq(desc); > + > + if (irq < 0) > + return irq; > + > + irq_flags = acpi_dev_get_irq_type(info.triggering, > + info.polarity); > + > + /* Set type if specified and different than the current one */ > + if (irq_flags != IRQ_TYPE_NONE && > + irq_flags != irq_get_trigger_type(irq)) > + irq_set_irq_type(irq, irq_flags); > + > + return irq; > + } > } > return -ENOENT; > } > diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c > index 6798355..90e737f 100644 > --- a/drivers/gpio/gpiolib.c > +++ b/drivers/gpio/gpiolib.c > @@ -1873,7 +1873,7 @@ static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id, > return desc; > } > > - if (info.active_low) > + if (info.polarity == GPIO_ACTIVE_LOW) > *flags |= GPIO_ACTIVE_LOW; > > return desc; > @@ -2212,7 +2212,7 @@ struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode, > desc = acpi_get_gpiod_by_index(to_acpi_node(fwnode), propname, 0, > &info); > if (!IS_ERR(desc)) > - active_low = info.active_low; > + active_low = info.polarity == GPIO_ACTIVE_LOW; > } > > if (IS_ERR(desc)) > diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h > index 78e634d..57063d2 100644 > --- a/drivers/gpio/gpiolib.h > +++ b/drivers/gpio/gpiolib.h > @@ -22,11 +22,13 @@ struct acpi_device; > /** > * struct acpi_gpio_info - ACPI GPIO specific information > * @gpioint: if %true this GPIO is of type GpioInt otherwise type is GpioIo > - * @active_low: in case of @gpioint, the pin is active low > + * @polarity: in case of @gpioint, the pin is active low > + * @triggering: in case of @gpioint, interrupt triggering mode (edge or level) > */ > struct acpi_gpio_info { > bool gpioint; > - bool active_low; > + u32 polarity; > + u32 triggering; > }; > > /* gpio suffixes used for ACPI and device tree lookup */ > -- > 2.1.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-spi" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- With Best Regards, Andy Shevchenko -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html