Applied "spi: imx: replace multiple watermarks with single for RX, TX and RXT" to the spi tree

[Mark Brown <broonie@xxxxxxxxxx>]

The patch

   spi: imx: replace multiple watermarks with single for RX, TX and RXT

has been applied to the spi tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 0dfbaa8932a6c4ffd83a6459f247bf06b4652543 Mon Sep 17 00:00:00 2001
From: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
Date: Sat, 5 Dec 2015 17:57:01 +0100
Subject: [PATCH] spi: imx: replace multiple watermarks with single for RX, TX
 and RXT

There is no need to have different watermarks levels since they are the same.
Merge them into one WML parameter.

Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@xxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 drivers/spi/spi-imx.c | 29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index e6b1c74ade6b..beba40b08ed1 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -104,9 +104,7 @@ struct spi_imx_data {
 	unsigned int dma_is_inited;
 	unsigned int dma_finished;
 	bool usedma;
-	u32 rx_wml;
-	u32 tx_wml;
-	u32 rxt_wml;
+	u32 wml;
 	struct completion dma_rx_completion;
 	struct completion dma_tx_completion;
 
@@ -201,9 +199,8 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
 
-	if (spi_imx->dma_is_inited
-	    && transfer->len > spi_imx->rx_wml * sizeof(u32)
-	    && transfer->len > spi_imx->tx_wml * sizeof(u32))
+	if (spi_imx->dma_is_inited &&
+	    transfer->len > spi_imx->wml * sizeof(u32))
 		return true;
 	return false;
 }
@@ -388,10 +385,9 @@ static int __maybe_unused mx51_ecspi_config(struct spi_imx_data *spi_imx,
 	if (spi_imx->dma_is_inited) {
 		dma = readl(spi_imx->base + MX51_ECSPI_DMA);
 
-		spi_imx->rxt_wml = spi_imx_get_fifosize(spi_imx) / 2;
-		rx_wml_cfg = spi_imx->rx_wml << MX51_ECSPI_DMA_RX_WML_OFFSET;
-		tx_wml_cfg = spi_imx->tx_wml << MX51_ECSPI_DMA_TX_WML_OFFSET;
-		rxt_wml_cfg = spi_imx->rxt_wml << MX51_ECSPI_DMA_RXT_WML_OFFSET;
+		rx_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_RX_WML_OFFSET;
+		tx_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_TX_WML_OFFSET;
+		rxt_wml_cfg = spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET;
 		dma = (dma & ~MX51_ECSPI_DMA_TX_WML_MASK
 			   & ~MX51_ECSPI_DMA_RX_WML_MASK
 			   & ~MX51_ECSPI_DMA_RXT_WML_MASK)
@@ -842,6 +838,8 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 	if (of_machine_is_compatible("fsl,imx6dl"))
 		return 0;
 
+	spi_imx->wml = spi_imx_get_fifosize(spi_imx) / 2;
+
 	/* Prepare for TX DMA: */
 	master->dma_tx = dma_request_slave_channel(dev, "tx");
 	if (!master->dma_tx) {
@@ -853,7 +851,7 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 	slave_config.direction = DMA_MEM_TO_DEV;
 	slave_config.dst_addr = res->start + MXC_CSPITXDATA;
 	slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
-	slave_config.dst_maxburst = spi_imx_get_fifosize(spi_imx) / 2;
+	slave_config.dst_maxburst = spi_imx->wml;
 	ret = dmaengine_slave_config(master->dma_tx, &slave_config);
 	if (ret) {
 		dev_err(dev, "error in TX dma configuration.\n");
@@ -871,7 +869,7 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 	slave_config.direction = DMA_DEV_TO_MEM;
 	slave_config.src_addr = res->start + MXC_CSPIRXDATA;
 	slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
-	slave_config.src_maxburst = spi_imx_get_fifosize(spi_imx) / 2;
+	slave_config.src_maxburst = spi_imx->wml;
 	ret = dmaengine_slave_config(master->dma_rx, &slave_config);
 	if (ret) {
 		dev_err(dev, "error in RX dma configuration.\n");
@@ -884,8 +882,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 	master->max_dma_len = MAX_SDMA_BD_BYTES;
 	spi_imx->bitbang.master->flags = SPI_MASTER_MUST_RX |
 					 SPI_MASTER_MUST_TX;
-	spi_imx->tx_wml = spi_imx_get_fifosize(spi_imx) / 2;
-	spi_imx->rx_wml = spi_imx_get_fifosize(spi_imx) / 2;
 	spi_imx->dma_is_inited = 1;
 
 	return 0;
@@ -952,7 +948,7 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 	dma = readl(spi_imx->base + MX51_ECSPI_DMA);
 	dma = dma & (~MX51_ECSPI_DMA_RXT_WML_MASK);
 	/* Change RX_DMA_LENGTH trigger dma fetch tail data */
-	left = transfer->len % spi_imx->rxt_wml;
+	left = transfer->len % spi_imx->wml;
 	if (left)
 		writel(dma | (left << MX51_ECSPI_DMA_RXT_WML_OFFSET),
 				spi_imx->base + MX51_ECSPI_DMA);
@@ -987,8 +983,9 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
 			spi_imx->devtype_data->reset(spi_imx);
 			dmaengine_terminate_all(master->dma_rx);
 		}
+		dma &= ~MX51_ECSPI_DMA_RXT_WML_MASK;
 		writel(dma |
-		       spi_imx->rxt_wml << MX51_ECSPI_DMA_RXT_WML_OFFSET,
+		       spi_imx->wml << MX51_ECSPI_DMA_RXT_WML_OFFSET,
 		       spi_imx->base + MX51_ECSPI_DMA);
 	}
 
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html