Hi, On Wed, Jul 29, 2015 at 1:04 PM, Leilk Liu <leilk.liu@xxxxxxxxxxxx> wrote: > Signed-off-by: Leilk Liu <leilk.liu@xxxxxxxxxxxx> > --- > .../devicetree/bindings/spi/spi-mt65xx.txt | 38 ++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/spi/spi-mt65xx.txt > > diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt > new file mode 100644 > index 0000000..f8005d6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt > @@ -0,0 +1,38 @@ > +MTK SPI device You are calling it "MediaTek SPI controller" in the Kconfig entry, so you should call it that here as well. > + > +Required properties: > +- compatible: should be one of the following. > + - mediatek,mt8173-spi: for mt8173 platforms > + - mediatek,mt8135-spi: for mt8135 platforms > + - mediatek,mt6589-spi: for mt6589 platforms > + > +- #address-cells: should be 1. > + > +- #size-cells: should be 0. > + > +- reg: Address and length of the register set for the device > + > +- interrupts: Should contain spi interrupt > + > +- clocks: phandles to input clocks. > + > +- clock-names: tuple listing input clock names. > + Required elements: "main" > + > +- pad-select: should specify spi pad used, only required for MT8173. > + This value should be 0~3. As already commented on the v3, this is a vendor property, and must have a vendor prefix, so it must be called "mediatek,pad-select". > + > +Example: > + > +- SoC Specific Portion: > +spi: spi@1100a000 { > + compatible = "mediatek,mt8173-spi"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0 0x1100a000 0 0x1000>; > + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&pericfg CLK_PERI_SPI0>; > + clock-names = "main"; > + pad-select = <0>; > + status = "disabled"; > +}; Jonas -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html