On Tue, Feb 25, 2014 at 7:21 PM, Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote: > Hi Mark, > > This patch series refactors the sh-msiof SPI driver and adds support for > the MSIOF variant in the Renesas R-Car H2 (r8a7790) and M2 (r8a7791) SoCs. > > It was tested on the Lager and Koelsch development boards, using a dummy > driver for the Renesas r2a11302ft PMIC that reads out the PMIC's version ID. > > [1/6] spi: sh-msiof: Improve bindings > [2/6] spi: sh-msiof: Move default FIFO sizes to device ID data > [3/6] spi: sh-msiof: Add support for R-Car H2 and M2 > [4/6] spi: sh-msiof: Move clock management to (un)prepare_message() > [5/6] spi: sh-msiof: Convert to let spi core validate xfer->bits_per_word > [6/6] spi: sh-msiof: Use core message handling instead of spi-bitbang > > These are (reworked versions of) the remaining patches not taken from v1. > Changelogs are available in the individual patches. > > Some of this work was based on a patch series by Takashi Yoshii > <takasi-y@xxxxxxxxxxxxx>. Hi Geert, Thanks for this updated version. I like the way you reworked the DT bindings to let the FIFO configuration stay in the driver. Also getting rid of the now-not-needed bitbang dependency is a great thing. All these patches look good to me. Acked-by: Magnus Damm <damm@xxxxxxxxxxxxx> Cheers, / magnus -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html