Hi Glenn, I think you should use nc. I will send you detailed instructions tomorrow. Regards, Willem On Fri, 26 Aug 2022, K0LNY_Glenn wrote:
[The e-mail server of the sender could not be verified (SPF Record)] Hi Brian, The trouble is that I cannot SCP because I cannot SSH into it. It has audio, and I can use apt, but AntiX has its own limited repository. It has something I think it was called apt-antiX or something, but it is menu driven, and that does not work with OCR on the screen. So it seems fast and viable, but I cannot get anything into it. If I put stuff on a thumb drive and plugged it in, without speech output, I couldn't possibly get all guesses needed to find the device in /media/demo. Thanks though. Glenn ----- Original Message ----- From: "Brian Buhrow" <buhrow@xxxxxxxxxx> To: "K0LNY_Glenn" <glenn@ervin.email>; "Chime Hart" <chime@xxxxxxxxxxxxxxxxxxx> Cc: "Willem van der Walt" <wvdwalt@xxxxxxxxxx>; "Speakup is a screen review system for Linux." <speakup@xxxxxxxxxxxxxxxxx>; <buhrow@xxxxxxxxxx> Sent: Friday, August 26, 2022 10:12 AM Subject: Re: hopefully some help with AntiX Hello Glen. Here are a couple of suggestions to try and figure out what's going on. It sounds like the machine you're installing is up and running to some extent, i.e. you believe it has enough network to go out and download packages from repositories. If that's true, then I suggest building yourself a data file on the machine about its state and then scp it back to your working machine for post mortom analysis. In this way, you can be smarter about what's really going on with it rather than just trying our suggestions and getting more and more frustrated. Depending on the state of the machine, there are a couple of ways to approach this task. 1. If you have the script command installed, I suggest: cd /tmp script Then, do a dump of the dmesg output of the machine, a dump of a list of packages on the machine, a dump of the network configuration on the machine, using such commands as ifconfig and netstat, (if this is Ubuntu based, there's a command that replaces netstat that I don't remember off the top of my head.) The script command will capture your commands, and the output they generate, into a file called typescript in the current directory (/tmp above). When you've collected a bunch of data, exit the shell you started with the script command and scp the file "typescript" back to your working installed machine and look it over. Keep in mind there will be some portions of it that will look like giberish because it captures all the terminal escape sequences to format the screen as well, but it will give you a lot more knowledge about what is going on. Also, it will tell you which commands worked and which didn't, and why. You may need to repeat this process of collecting a script file from the machine several times, using the knowledge you gained from the last round, to try more informed commands. 2. If the script command is not available, then create your own approximation of the script command by doing the following: cd /tmp touch typescript dmesg >> typescript 2>&1 . . . Repeat commands, followed by >> typescript 2>&1 over and over again, as described above, to dump the output of both standard out and standard error (path for error messages) into your hand made typescript file. When you have collected enough initial data to try doing an analysis, scp the typescript file back to your working machine and have a look at it. Keep in mind that when you reboot the Antics machine, the /tmp/typescript file will be erased. My apologies for not being familiar with the aptitude commands to give you examples of how to get package listings from the machine directly. Although, dumping the output of aptitude --help >> /tmp/typescript 2>&1 into your typescript file should give you pretty good directions on how to use it. Hope this helps. -Brian
