I put in the tabs after "Description:" and did the best I could to fix the alignment, and to find and get rid of the white space. If the alignment is still off, or if there is still white space I missed, could someone else please correct that? Thanks. Greg
Trailing white spaces removed in attachment. Alignment LGTM. Best, Didier
What: /sys/accessibility/speakup/attrib_bleep KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Beeps the PC speaker when there is an attribute change such as foreground or background color when using speakup review commands. One = on, zero = off. What: /sys/accessibility/speakup/bell_pos KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: This works much like a typewriter bell. If for example 72 is echoed to bell_pos, it will beep the PC speaker when typing on a line past character 72. What: /sys/accessibility/speakup/bleeps KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: This controls whether one hears beeps through the PC speaker when using speakup's review commands. TODO: what values does it accept? What: /sys/accessibility/speakup/bleep_time KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: This controls the duration of the PC speaker beeps speakup produces. TODO: What are the units? Jiffies? What: /sys/accessibility/speakup/cursor_time KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: This controls cursor delay when using arrow keys. When a connection is very slow, with the default setting, when moving with the arrows, or backspacing etc. speakup says the incorrect characters. Set this to a higher value to adjust for the delay and better synchronisation between cursor position and speech. What: /sys/accessibility/speakup/delimiters KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Delimit a word from speakup. TODO: add more info What: /sys/accessibility/speakup/ex_num KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: TODO: What: /sys/accessibility/speakup/key_echo KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Controls if speakup speaks keys when they are typed. One = on, zero = off or don't echo keys. What: /sys/accessibility/speakup/keymap KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Speakup keymap remaps keys to Speakup functions. It uses a binary format. A special program called genmap is needed to compile a textual keymap into the binary format which is then loaded into /sys/accessibility/speakup/keymap. What: /sys/accessibility/speakup/no_interrupt KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Controls if typing interrupts output from speakup. With no_interrupt set to zero, typing on the keyboard will interrupt speakup if for example the say screen command is used before the entire screen is read. With no_interrupt set to one, if the say screen command is used, and one then types on the keyboard, speakup will continue to say the whole screen regardless until it finishes. What: /sys/accessibility/speakup/punc_all KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: This is a list of all the punctuation speakup should speak when punc_level is set to four. What: /sys/accessibility/speakup/punc_level KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Controls the level of punctuation spoken as the screen is displayed, not reviewed. Levels range from zero no punctuation, to four, all punctuation. One corresponds to punc_some, two corresponds to punc_most, and three as well as four both correspond to punc_all. Some hardware synthesizers may have different levels each corresponding to three and four for punc_level. Also note that if punc_level is set to zero, and key_echo is set to one, typed punctuation is still spoken as it is typed. What: /sys/accessibility/speakup/punc_most KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: This is a list of all the punctuation speakup should speak when punc_level is set to two. What: /sys/accessibility/speakup/punc_some KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: This is a list of all the punctuation speakup should speak when punc_level is set to one. What: /sys/accessibility/speakup/reading_punc KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Almost the same as punc_level, the differences being that reading_punc controls the level of punctuation when reviewing the screen with speakup's screen review commands. The other difference is that reading_punc set to three speaks punc_all, and reading_punc set to four speaks all punctuation, including spaces. What: /sys/accessibility/speakup/repeats KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: A list of characters speakup repeats. Normally, when there are more than three characters in a row, speakup just reads three of those characters. For example, "......" would be read as dot, dot, dot. If a . is added to the list of characters in repeats, "......" would be read as dot, dot, dot, times six. What: /sys/accessibility/speakup/say_control KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: If set to one, speakup speaks shift, alt and control when those keys are pressed. If say_control is set to zero, shift, ctrl, and alt are not spoken when they are pressed. What: /sys/accessibility/speakup/say_word_ctl KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: TODO: What: /sys/accessibility/speakup/silent KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: TODO: What: /sys/accessibility/speakup/spell_delay KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: This controls how fast a word is spelled when speakup's say word review command is pressed twice quickly to speak the current word being reviewed. Zero just speaks the letters one after another, while values one through four seem to introduce more of a pause between the spelling of each letter by speakup. What: /sys/accessibility/speakup/synth KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Gets or sets the synthesizer driver currently in use. Reading synth returns the synthesizer driver currently in use. Writing synth switches to the given synthesizer driver, provided it is either built into the kernel, or already loaded as a module. What: /sys/accessibility/speakup/synth_direct KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Sends whatever is written to synth_direct directly to the speech synthesizer in use, bypassing speakup. This could be used to make the synthesizer speak a string, or to send control sequences to the synthesizer to change how the synthesizer behaves. What: /sys/accessibility/speakup/version KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Reading version returns the version of speakup, and the version of the synthesizer driver currently in use. What: /sys/accessibility/speakup/i18n/announcements KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: This file contains various general announcements, most of which cannot be categorized. You will find messages such as "You killed Speakup", "I'm alive", "leaving help", "parked", "unparked", and others. You will also find the names of the screen edges and cursor tracking modes here. What: /sys/accessibility/speakup/i18n/chartab KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: TODO What: /sys/accessibility/speakup/i18n/ctl_keys KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Here, you will find names of control keys. These are used with Speakup's say_control feature. What: /sys/accessibility/speakup/i18n/function_names KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Here, you will find a list of names for Speakup functions. These are used by the help system. For example, suppose that you have activated help mode, and you pressed keypad 3. Speakup says: "keypad 3 is character, say next." The message "character, say next" names a Speakup function, and it comes from this function_names file. What: /sys/accessibility/speakup/i18n/states KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: This file contains names for key states. Again, these are part of the help system. For instance, if you had pressed speakup + keypad 3, you would hear: "speakup keypad 3 is go to bottom edge." The speakup key is depressed, so the name of the key state is speakup. This part of the message comes from the states collection. What: /sys/accessibility/speakup/i18n/characters KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Through this sys entry, Speakup gives you the ability to change how Speakup pronounces a given character. You could, for example, change how some punctuation characters are spoken. You can even change how Speakup will pronounce certain letters. For further details see '12. Changing the Pronunciation of Characters' in Speakup User's Guide (file spkguide.txt in source). What: /sys/accessibility/speakup/i18n/colors KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: When you use the "say attributes" function, Speakup says the name of the foreground and background colors. These names come from the i18n/colors file. What: /sys/accessibility/speakup/i18n/formatted KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: This group of messages contains embedded formatting codes, to specify the type and width of displayed data. If you change these, you must preserve all of the formatting codes, and they must appear in the order used by the default messages. What: /sys/accessibility/speakup/i18n/key_names KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Again, key_names is used by Speakup's help system. In the previous example, Speakup said that you pressed "keypad 3." This name came from the key_names file. What: /sys/accessibility/speakup/<synth-name>/ KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: In `/sys/accessibility/speakup` is a directory corresponding to the synthesizer driver currently in use (E.G) `soft` for the soft driver. This directory contains files which control the speech synthesizer itself, as opposed to controlling the speakup screen reader. The parameters in this directory have the same names and functions across all supported synthesizers. The range of values for freq, pitch, rate, and vol is the same for all supported synthesizers, with the given range being internally mapped by the driver to more or less fit the range of values supported for a given parameter by the individual synthesizer. Below is a description of values and parameters for soft synthesizer, which is currently the most commonly used. What: /sys/accessibility/speakup/soft/caps_start KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: This is the string that is sent to the synthesizer to cause it to start speaking uppercase letters. For the soft synthesizer and most others, this causes the pitch of the voice to rise above the currently set pitch. What: /sys/accessibility/speakup/soft/caps_stop KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: This is the string sent to the synthesizer to cause it to stop speaking uppercase letters. In the case of the soft synthesizer and most others, this returns the pitch of the voice down to the currently set pitch. What: /sys/accessibility/speakup/soft/delay_time KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: TODO: What: /sys/accessibility/speakup/soft/direct KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Controls if punctuation is spoken by speakup, or by the synthesizer. For example, speakup speaks ">" as "greater", while the espeak synthesizer used by the soft driver speaks "greater than". Zero lets speakup speak the punctuation. One lets the synthesizer itself speak punctuation. What: /sys/accessibility/speakup/soft/freq KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Gets or sets the frequency of the speech synthesizer. Range is 0-9. What: /sys/accessibility/speakup/soft/full_time KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: TODO: What: /sys/accessibility/speakup/soft/jiffy_delta KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: This controls how many jiffys the kernel gives to the synthesizer. Setting this too high can make a system unstable, or even crash it. What: /sys/accessibility/speakup/soft/pitch KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Gets or sets the pitch of the synthesizer. The range is 0-9. What: /sys/accessibility/speakup/soft/punct KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Gets or sets the amount of punctuation spoken by the synthesizer. The range for the soft driver seems to be 0-2. TODO: How is this related to speakup's punc_level, or reading_punc. What: /sys/accessibility/speakup/soft/rate KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Gets or sets the rate of the synthesizer. Range is from zero slowest, to nine fastest. What: /sys/accessibility/speakup/soft/tone KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Gets or sets the tone of the speech synthesizer. The range for the soft driver seems to be 0-2. This seems to make no difference if using espeak and the espeakup connector. TODO: does espeakup support different tonalities? What: /sys/accessibility/speakup/soft/trigger_time KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: TODO: What: /sys/accessibility/speakup/soft/voice KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Gets or sets the voice used by the synthesizer if the synthesizer can speak in more than one voice. The range for the soft driver is 0-7. Note that while espeak supports multiple voices, this parameter will not set the voice when the espeakup connector is used between speakup and espeak. What: /sys/accessibility/speakup/soft/vol KernelVersion: 2.6 Contact: speakup@xxxxxxxxxxxxxxxxx Description: Gets or sets the volume of the speech synthesizer. Range is 0-9, with zero being the softest, and nine being the loudest.
_______________________________________________ Speakup mailing list Speakup@xxxxxxxxxxxxxxxxx http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup
