Didier Spaier, le mer. 24 avril 2019 14:14:46 +0200, a ecrit: > On 24/04/2019 10:35, Samuel Thibault wrote: > > Didier Spaier, le mer. 24 avril 2019 12:20:08 +0200, a ecrit: > >> On 23/04/2019 23:40, Didier Spaier wrote: > >>> On bare metal, no luck: the installer could not detect > >>> my sound card, so no speech in the installer. > >>> > >>> It made 9 unsuccessful attempts, told it would tried > >>> other cards, seemed to gave up. > > > > What do you mean by "told it would tried other cards"? What _exactly_ > > did it write? Otherwise I'm not sure what exactly you refer to, that's > > how a way for me to be able to debug anything. > > Display: > No sound cards detected after 3 seconds... > No sound cards detected after 4 seconds... > No sound cards detected after 5 seconds... > No sound cards detected after 6 seconds... > No sound cards detected after 7 seconds... > No sound cards detected after 8 seconds... > No sound cards detected after 9 seconds... > Waiting for 9 more seconds for any other card... Ok, so it did find a card (after 9sec initialization...) > Then choice of language. Without audible speech, I guess? Is espeakup running? > output of "amixer scontrols -d 0": > Simple mixer control 'Master',0 > Simple mixer control 'Headphone',0 > Simple mixer control 'Speaker',0 > Simple mixer control 'PCM',0 Ok, so nothing too fancy. > Output of "amixer scontents -d 0" > TBH, too much text to note on a paper > (I tried to mount ahrd disk partition /dev/sdb2 on /mnt, didn't work) > but from a running system, attached. The running system version is not useful, however, since it's the levels as d-i gets them that we want. Could you report at least the levels for Master/Headphone/Speaker/PCM? Something like: Simple mixer control 'Master',0 Mono: Playback 57 [66%] [-22.50dB] [on] Simple mixer control 'Headphone',0 Front Left: Playback 87 [100%] [0.00dB] [on] Front Right: Playback 87 [100%] [0.00dB] [on] Simple mixer control 'Speaker',0 Front Left: Playback 0 [0%] [-65.25dB] [off] Front Right: Playback 0 [0%] [-65.25dB] [off] Simple mixer control 'PCM',0 Front Left: Playback 255 [100%] [0.00dB] Front Right: Playback 255 [100%] [0.00dB] Here you see that my Speaker level is off (which is expected on my installed system). > In a running system though I have irq 37 instead of irq 27. > Could that come into play? That shouldn't harm. > echo /sys/class/sound/card*/id > /sys/class/sound/card0/id > > cat /sys/class/sound/card*/id > PCH Ok, could you also post cat /var/run/espeakup.card ? Samuel _______________________________________________ Speakup mailing list Speakup@xxxxxxxxxxxxxxxxx http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup
