No, it didn't worked, but I know now what is the problem: It checks the module version and if it didn't match the kernel version - it rejects it. Now I'm planning to try to force the version number of my copy of the source to the exact version which Fedora uses and then compile the module again. On 12/09/2015 12:06 AM, Zahari Yurukov wrote: > Hi, > I was able to extract the kmod-staging rpm following this instructions: > http://www.cyberciti.biz/tips/how-to-extract-an-rpm-package-without-installing-it.html > Then I copied all speakup related files to the place, where the rpm was > supposed to extract them. > However, modprobe says it couldn't find speakup_soft module and insmod > says that speakup_soft.ko is in invalid module format. > Then I've downloaded the source of kernel 4.2.6 from kernel.org and was > eble to compile the speakup module alone following this instructions: > http://askubuntu.com/questions/168279/how-do-i-build-a-single-in-tree-kernel-module > This time I've copied the speakup*.ko files under > /usr/lib/modules/4.2.6..../drivers/staging/speakup/ > Again, modprobe says it couldn't find speakup_soft module and insmod > says that speakup_soft.ko is in invalid module format. > Hmmmph, after executing depmod, this time modprobe says: > modprobe: ERROR: could not insert 'speakup_soft': Exec format error > At least it detects it this time. > > I'm using kernel with the PAE patch - is it possible that PAE brakes things? > I'll reboot into the non-PAE version of the same kernel now to check if > it works there. > > Best wishes, > Zahari > > > On 12/08/2015 09:41 PM, Alonzo Cuellar wrote: >> Hello, >> Ok do let me know if you are able to install speakup. >> I see the modules in the tar archive >> linux-4.3.tar.xz >> Once you download the archive change to the directory driver/staging >> Since these use to be hosted in its own source as a git repository you >> use to be able to do >> make modules_install >> That might or might not work in the current staging directory. >> >> Alonzo >> On 12/08/2015 12:35 PM, Zahari Yurukov wrote: >>> Hi, >>> Thanks, that ansers my last question. >>> However, I forgot to mention, that speakup is stripped out of the Fedora >>> kernels and is contained in this package kmod-staging - that's why the >>> espeakup rpm package requires it. >>> Now I have to figure out if it's possible to compile that individual >>> kernel module (speakup) alone and install it under my current kernel. >>> Or if I can extract it from an older rpm of kmod-staging - it probably >>> has not changed. >>> I'll write you if I have any progress. >>> Any other suggestions are also welcomed. >>> >>> Best wishes, >>> Zahari >>> >>> On 12/08/2015 06:56 PM, Alonzo Cuellar wrote: >>>> Hello, >>>> How about installing the headers for the kernel, the espeak-devel >>>> package and cloning >>>> git clone git://github.com/williamh/espeakup.git >>>> You could then build the espeakup connector and I'd think this would >>>> work. >>>> As far as a package I've not been successful in building an rpm. >>>> >>>> Alonzo >>>> >>>> On 12/08/2015 09:13 AM, Zahari Yurukov wrote: >>>>> Hi, >>>>> I'm running Fedora 23 for the last 10 days and everything looks nice, >>>>> except the only kernel in the repositories is version 4.2.6 and >>>>> kmod-staging is version 4.0.4 (from May 28th), i.e there is no >>>>> combination of kernel and kmod-staging which will allow me to install >>>>> espeakup from: >>>>> ftp://speakupmodified.org/speakupmodified/fedora/espeakup/ >>>>> I found kmod-staging-4.1.4 from august 5th, but again - no matching >>>>> kernel. >>>>> I looked in all rpmfusion repositories, as well as the default Fedora >>>>> one's, both development and updates. >>>>> Do you have any idea when we could expect kmod-staging-4.2.6? I >>>>> assume I >>>>> should expect it first in rpmfusion development, then >>>>> updates/testing/23 >>>>> and finaly in updates/23. >>>>> Unless they've decided to skip 4.2 and 4.3 series, which would be a >>>>> very >>>>> bad news, cause it means it won't be coming in at least another two >>>>> months. But isn't that the idea behind kmod-staging - to prepeir you >>>>> for >>>>> the new kernel? So there should be no skipping. >>>>> Where could I get kernel 4.0.4 or 4.1.4 for Fedora 23? >>>>> Also, the last espeakup rpm build is for Fedora 20 - will this work for >>>>> Fedora 23? >>>>> Could I add a repository for Fedora 22 and install a kernel from there? >>>>> What will be the implecations? >>>>> What will happen, if I install a vanilla kernel from: >>>>> https://fedoraproject.org/wiki/Kernel_Vanilla_Repositories Should I >>>>> expect problems? I expect to find speakup there, right? >>>>> Or I should compile a kernel from kernel.org? That one should be the >>>>> last resort though. >>>>> And if I have to use an unmodified kernel, how should I install >>>>> espeakup >>>>> then? I.e. without the rpm package, which depends on kmod-staging. >>>>> >>>>> Thanks, >>>>> Zahari >>>>> _______________________________________________ >>>>> Speakup mailing list >>>>> Speakup@xxxxxxxxxxxxxxxxx >>>>> http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup >>>> _______________________________________________ >>>> Speakup mailing list >>>> Speakup@xxxxxxxxxxxxxxxxx >>>> http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup >>> _______________________________________________ >>> Speakup mailing list >>> Speakup@xxxxxxxxxxxxxxxxx >>> http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup >> >> _______________________________________________ >> Speakup mailing list >> Speakup@xxxxxxxxxxxxxxxxx >> http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup _______________________________________________ Speakup mailing list Speakup@xxxxxxxxxxxxxxxxx http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup
