I know you didn't ask this but have you checked if the mobo on your PC has a searial port header block? Many motherboards have a serial port header block but its not connected to anything. A header block is a set of pins on the mmotherboard. The one for a serial port is about a quarter inch by a half inch. What would that be? About 3mm by 12mm? Something like that. If your mother board has that header block, for about $4 you can buy a cable that allows you to connect the header block to the case. I don't know how to find out if that header block is there except to either check the specifications for the motherboard itself or just to look for it. If you know what to look for or to feel for, you can find it. If you don't know what to look for, it might be hard. ----- Original Message ----- From: "D. Curtis Willoughby" <ka0vba@xxxxxxxxxx> To: <speakup at braille.uwo.ca> Sent: Monday, January 23, 2012 11:26 PM Subject: Re: Speakup and serial adapter cards > This is getting to be a big problem! > > I have a new computer without a serial port. To use a hardware > synthasizer like a Doubletalk LT I must use a USB to serial > adapter or a PCI-E card. This computer does not have PCI slot(s). > If this combination of "cannot do" restrictions is not fixed, > serial hardware synthesizers are doomed to become obsolete. > > I guess there are a few USB synthesizers, and software speach is > still well not wonderful. I have not been able to establish > whether the few PCI-E cards can manage IRQs and I/O addresses > so they are treated like internal serial ports, but I suspect > they cannot. Is it not possible to modify speakup so that it > can use any serial port on the machine, rather than just ttyS0 > and ttyS1? Would you developers please look at a solution for > this one? Please! > > D. Curtis Willoughby > >> From speakup-bounces at braille.uwo.ca Mon Jan 23 21:57:14 2012 >> Envelope-to: postman at localhost >> Delivery-date: Mon, 23 Jan 2012 21:57:14 -0700 >> X-Spam-Checker-Version: SpamAssassin 3.2.1 (2007-05-02) on >> new-mail2.hypermall.com >> X-Spam-Level: >> X-Spam-Status: No, score=0.0 required=5.0 tests=none autolearn=disabled >> version=3.2.1 >> X-Original-To: speakup at braille.uwo.ca >> From: acollins at icsmail.net >> Subject: Re: Speakup and serial adapter cards >> X-Virus-Scanned: Maia Mailguard 1.0.2 >> X-BeenThere: speakup at braille.uwo.ca >> X-Mailman-Version: 2.1.14 >> List-Id: "Speakup is a screen review system for Linux." >> <speakup.braille.uwo.ca> >> List-Unsubscribe: <http://speech.braille.uwo.ca/mailman/options/speakup>, >> <mailto:speakup-request at braille.uwo.ca?subject=unsubscribe> >> List-Archive: <http://speech.braille.uwo.ca/pipermail/speakup> >> List-Post: <mailto:speakup at braille.uwo.ca> >> List-Help: <mailto:speakup-request at braille.uwo.ca?subject=help> >> List-Subscribe: <http://speech.braille.uwo.ca/mailman/listinfo/speakup>, >> <mailto:speakup-request at braille.uwo.ca?subject=subscribe> >> MIME-Version: 1.0 >> Content-Type: text/plain; charset="us-ascii" >> Content-Transfer-Encoding: 7bit >> >> Nope, Speakup in now way supports pci serial cards. >> >> >Hello, >> >I know that speakup cannot work with synths connected through a USB to >> >serial >> adapter, however I would like to confirm whether speakup can use serial >> ports p >> rovided by a PCI-express or PCI serial adapter card? I am most interested >> in th >> e PCI-Express adapter cards. >> > >> >Michael Whapples >> >_______________________________________________ >> >Speakup mailing list >> >Speakup at braille.uwo.ca >> >http://speech.braille.uwo.ca/mailman/listinfo/speakup >> _______________________________________________ >> Speakup mailing list >> Speakup at braille.uwo.ca >> http://speech.braille.uwo.ca/mailman/listinfo/speakup >> > > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > >
