appreciate the thought, but routing is OK. PS: The device where I'm trying to do all this is a Linksys WRT54gs running OpenWRT. So, I've got all the great Linux tools natively on the box -- except Speakup and the kitchen sink. Ralph W. Reid writes: > The discussions here seem to cover the iptables commands pretty well > (based on my limited experience with this kind of thing). However, > once the addresses are translated, how are you routing the packets to > your LAN? If the translated addresses are not routed anywhere > (perhaps via `route'), then there seems to be no way to make a > connection to the systems. I am largely guessing at this point (no > flames please), but if no routing has been established for the > internal addresses, then perhaps no connections are actually being > established. Run `route' from a command line on the machine connected > to your MODEM with no parameters to see if there are any routes to > your LAN addresses. If not, then route can be used to establish some > as follows: > > route add -host 192.168.0.1 eth1 > route add -host 192.168.0.2 eth2 > route add -net 10.0.0.0/8 eth2 > > HTH, and have a _great_ day. > > On Wed, Nov 30, 2005 at 08:39:37AM -0700, Dawes, Stephen wrote: > > Not necessary, and don't know the effects if you do. > > > > > > > > Steve Dawes > > Phone: (403) 268-5527 > > Email: SDawes at calgary.ca > > > > > > > > NOTICE - > > This communication is intended ONLY for the use of the person or entity named above and may contain information that is confidential or legally privileged. If you are not the intended recipient named above or a person responsible for delivering messages or communications to the intended recipient, YOU ARE HEREBY NOTIFIED that any use, distribution, or copying of this communication or any of the information contained in it is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone and then destroy or delete this communication, or return it to us by mail if requested by us. The City of Calgary thanks you for your attention and cooperation. > > > > -----Original Message----- > > From: speakup-bounces at braille.uwo.ca > > [mailto:speakup-bounces at braille.uwo.ca] On Behalf Of Janina Sajka > > Sent: 2005 November 29 6:37 PM > > To: Speakup is a screen review system for Linux. > > Subject: Re: Routing Multiple Inbound IP Addresses -- How? > > > > Do I also need to accept explicitly, some version of: > > > > iptables -t filter -A FORWARD -j ACCEPT > > > > > > Or is that superfluous? > > > > > > _______________________________________________ > > Speakup mailing list > > Speakup at braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > -- > Ralph. N6BNO. Wisdom comes from central processing, not from I/O. > rreid at sunset.net http://personalweb.sunset.net/~rreid > ...passing through The City of Internet at the speed of light! > SEC (x) / COSEC (x) = (TAN (x) / COTAN (x)) ^ 2 > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup -- Janina Sajka Phone: +1.240.715.1272 Partner, Capital Accessibility LLC http://www.CapitalAccessibility.Com Marketing the Owasys 22C talking screenless cell phone in the U.S. and Canada--Go to http://www.ScreenlessPhone.Com to learn more. Chair, Accessibility Workgroup Free Standards Group (FSG) janina at freestandards.org http://a11y.org
