mounting an Iriver mp3 player

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Is the iriver a USB device?
If so, you'll need usb support compiled into the kernel. 
The beauty of this is, that it will automatically see the device when
you connect it and disconnect it. 

Steve Dawes
Phone: (403) 268-5527
Email: SDawes at calgary.ca
 
 

NOTICE -
This communication is intended ONLY for the use of the person or entity named above and may contain information that is confidential or legally privileged. If you are not the intended recipient named above or a person responsible for delivering messages or communications to the intended recipient, YOU ARE HEREBY NOTIFIED that any use, distribution, or copying of this communication or any of the information contained in it is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone and then destroy or delete this communication, or return it to us by mail if requested by us. The City of Calgary thanks you for your attention and cooperation.

> -----Original Message-----
> From: speakup-bounces at braille.uwo.ca 
> [mailto:speakup-bounces at braille.uwo.ca] On Behalf Of Raul A. Gallegos
> Sent: 2005 April 26 11:11 AM
> To: Speakup Mailing-list
> Subject: mounting an Iriver mp3 player
> 
> Hi.  I'm trying to mount my Iriver mp3 player under Fedora 
> Core 3.  When I attach the player to the usb port I get:
> 
> SCSI device sda: 39063024 512-byte hdwr sectors (20000 MB)
> sda: assuming drive cache: write through SCSI device sda: 
> 39063024 512-byte hdwr sectors (20000 MB)
> sda: assuming drive cache: write through Attached scsi disk 
> sda at scsi0, channel 0, id 0, lun 0
> 
> 
> So I made a directory /iriver and tried to mount it like this:
> 
> mount /dev/sda /iriver
> 
> I got the error:
> 
> mount: you must specify the filesystem type
> 
> So then I tried:
> 
> mount -t auto /dev/sda /iriver
> FAT: invalid media value (0xb9)
> mount: you must specify the filesystem type
> 
> 
> Under Windows if I remember the drive was seen as a fat32 
> drive yet I'm not able to mount it with the vfat type.
> 
> Any ideas/suggestions?
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> 
> 




[Index of Archives]     [Linux for the Blind]     [Fedora Discussioin]     [Linux Kernel]     [Yosemite News]     [Big List of Linux Books]
  Powered by Linux