Do you have a gateway defined? route add default-gw ip-of-gateway netmask 0.0.0.0 Also, do you have a nameserver defined in /etc/resolv.conf? Greg On Sun, Jan 25, 2004 at 03:22:23PM -0500, Jes and guide dog Harley wrote: > Well, after setting the network card in the machine that has Debian 3.0 R 2 on it, I went and installed the module for my card. > Whenever I run ifconfig, I get no errors at all, but I can not connect to any websites via lynx or anything else. I set the module > originally for a static ip, but soon after I realized this was a mistake I went and changed the line in my /etc/network/interfaces > file so that it reads: > iface eth0 inet dhcp > And I completely stript away the address line after that. What could I be doing wrong here? Everything looks good on the hardware > side of things and everything says it's checking out okay on the ifconfig screen. Any help would be appreciated. I'm running the > tulip.c module that came with my Linksys network card. > Jes > > > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup -- Free domains: http://www.eu.org/ or mail dns-manager at EU.org
