Hi Igor/Adam, I left isapnp support out of my kernel when compiling it, and configured the alsa-drivers using --without-isapnp and --with-oss. But my sound card is a PCI device, sblive. Not sure what else I did this time that made it work okay. On Thu, 17 Oct 2002, Igor Gueths wrote: > Oh one other thing. What did you include as configure cmdline? > > Microsoft dialogue > This company has performed an illegal operation and will be shutdown. If this problem persists, delete Winblows and install Linux. Close button > > On Thu, 17 Oct 2002, Adam Myrow wrote: > > > On Thu, 17 Oct 2002, Igor Gueths wrote: > > > > > Hi Adam. Did you try rc3? Or any of the 'rc' versions? Also, what modules > > > did you have loaded Did you have snd-mixer-oss loaded (if using rc3)? > > > > I tried RC3 and it never would compile. I still have the errors from > > attempts to compile it. If possible, I'd rather use a later version as I > > figure that it'll hopefully be less buggy. Anyhow, here is a sample of > > the errors I was getting when trying to build the driver. > > > > About halfway down: > > > > pdplus.c:3032: warning: #warning "This driver need to be ported to new hw_info" > > pdplus.c:3082: warning: #warning "This driver need to be ported to new hw_info" > > pdplus.c:3107: warning: #warning "This driver need to be ported to new hw_info" > > pdplus.c:3136: warning: #warning "The S/PDIF setup code needs to be rewritten." > > pdplus.c:3212: warning: #warning "This driver need to be ported to new hw_info" > > > > Some time later: > > > > from /usr/src/alsa-driver-0.9.0rc3/include/sound/driver.h:43, > > from ../alsa-kernel/core/hwdep.c:22, > > from hwdep.c:1: > > /usr/src/alsa-driver-0.9.0rc3/include/linux/isapnp.h:334: warning: `struct > > isapnp_card_id' declared inside parameter list > > /usr/src/alsa-driver-0.9.0rc3/include/linux/isapnp.h:334: warning: its > > scope is only this definition or declaration, which is probably not what > > you want. > > > > This last error repeats over and over and finally, the build would bomb > > out with: > > > > sound.c:41: `snd_hack_usb_set_interface' undeclared here (not in a > > function) > > sound.c:41: initializer element is not constant > > sound.c:41: (near initialization for > > `__ksymtab_snd_hack_usb_set_interface.value') > > make[1]: *** [sound.o] Error 1 > > make[1]: Leaving directory `/usr/src/alsa-driver-0.9.0rc3/acore' > > make: *** [compile] Error 1 > > > > Looking at this more closely, it may be choking on the fact that I don't > > have USB on this machine and thus don't include USB support in my kernel. > > any ideas? > > > > > > > > _______________________________________________ > > Speakup mailing list > > Speakup at braille.uwo.ca > > http://speech.braille.uwo.ca/mailman/listinfo/speakup > > > > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup > -- The Moon is Waxing Gibbous (91% of Full) So visit me at http://www.valstar.net/~hallenbeck
