samba: reading files from my Windows 2000 machine from my RedHat Linux machine.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I don't have step by step directions to give you quickly, but I can
refer you to the smb.conf that samba uses on the linux side and I can
mention some basic things to do on the windows machine.

First of all, to get windows out of the way, you will need to "share"
the drive/directories on the windows box.  Not sure how to do it in
2000 but in '98, you could designate share names from the explorer
pane.  Also you need to have "client for Microsoft networking" active
to enable the sharing.

Now for the linux side; In the versions of smb.conf I have seen from
the standard samba distributed archives and from slackware packages,
just follow the comments and fill out things as you see fit.  The
workgroup must be the same for all machines in the workgroup.  I
personally like the linux box to act as the "master browser; I
understand only one machine is supposed to assume this role.
Actually come to think of it, I don't think there's much needed to be
done on the linux side so files on the other machine can be accessed.
You can test things out with the smbclient, a crude command-line based
thing with which you can get and put files from the windows box.
After you get this checked out, you can then take up mounting files to
mount points on your linux system so files can be accessed just like
other files on your box.  That is done with the smbmount command like
so:
smbmount //winbox/share /mount-point
To do this, your kernel must have smbfs support made available.
Without smbfs support, you will have to stick with that smbclient.

HTH.

On Tue, Aug 06, 2002 at 05:32:03PM -0400, Mark Rew wrote:
> Hi :Lists,
> 
> Can someone refer me to a straight forward step-by-step guide to setting up my
> Windows 2000 and RedHat Linux 7.3 Machines to allow me share files from the
> Windows to the Linux?
> 
> I have read several interesting documents that gave me the history of SMB and
> described UDP, TCP and port numbers 137:139 etc.  This has been some of the
> most interesting reading since I took Distributed Systems in the Fall of 2000.
> But!  Since, I'm in a work environment where I need to get something working
> quickly, I need a more direct document that gives a how-to, if I know IP
> addresses, group domains, and how to share Windows.
> 
> Any pointers to a simple guide will be grately appreciated.
> 
> thanks
> Mark Rew
> e-mail: mark.rew at noaa.gov
> 301-713-0262 x131
> 
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup




[Index of Archives]     [Linux for the Blind]     [Fedora Discussioin]     [Linux Kernel]     [Yosemite News]     [Big List of Linux Books]
  Powered by Linux