Hi. I'm using a braille lite 2k, since that's all I got. I have LILO configured right, but it still won't work! Do you know how to change the port settings like parity and baud rate in linux? Thanks! ----- Original Message ----- From: "Igor Gueths" <igueths@xxxxxxxxx> To: <speakup at braille.uwo.ca> Sent: Saturday, March 30, 2002 7:15 PM Subject: Re: Port settings in linux > Hi Alex. What synth are you using? Have you tried speakup_synth=<synth> at > the lilo boot prompt? If you are using the dectalk express, you would do > speakup_synth=dectlk at the lilo prompt. Or in /etc/lilo.conf, you would > do something like append > speakup_synth=dectlk. This will apply to all of your installed vmlinuz > kernel images. Hope this helps and good luck! > On Sat, 30 Mar 2002, Alex Snow wrote: > > > Hi. > > I just wanted to know what the default serial port settings are in linux. I can't seem to get my hardware synth to work in linux, but it works in winblows on the same machine. > > Thanks! > > Alex Snow > > email: alex8887 at hotmail.com > > BBS: Telnet://bbs1.dyndns.org > > > > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup >
