I used speakup with an accent sa as described here with the wheel on t
ehfront and got it talking right away with the 4th and last dipswitches
down which is the default for accent sa. It's a bit clugy on my machine
and sounds a bit like donald duck or did anyway, but it worked well.
----- Original Message -----
From: "Monty Lilburn" <monty@xxxxx>
To: <speakup at braille.uwo.ca>
Sent: Tuesday, February 05, 2002 4:14 PM
Subject: Re: Speakup w/Accent-SA
Hi Frank,
On Tue, 5 Feb 2002, Frank Carmickle wrote:
>No there all fine. What accentsa are you using? The older one with
the
>separate power and volume on the back or the newer one with a thumb
wheel
>on the front? What are your dip switch settings set to? What uart is
>this?
My accent-sa sounds like the newer one you describe. The thumb-wheel
volume controle is on the front. The uart on my machine is a 16550A,
and
I am currently at work and I am not 100% sure of the dip-switch
settings,
I think the fourth and last switch are down. Does speakup work better
with E7 or N8?
I have booted up via a dos disk with Vocal Eyes on this machine and it
works great! Maybe it's the dip switches though...
thanks
Monty
--------------------------------------------------------------
SUBMERGED IN THE 6o4 AREA CODE
A proud user of the LINUX Operating System!
----------------------------------------------------------------------
_______________________________________________
Speakup mailing list
Speakup at braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup
